ISO 14130:1997
Current
Current
The latest, up-to-date edition.
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
Amended by
Available format(s)
Hardcopy , PDF
Published date
11-12-1997
€63.00
Excluding VAT
| Committee |
ISO/TC 61/SC 13
|
| DevelopmentNote |
Supersedes ISO 4585 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 14130 : 1998 | Identical |
| NBN EN ISO 14130 : 1998 | Identical |
| NEN EN ISO 14130 : 1997 | Identical |
| NS EN ISO 14130 : 1ED 1998 | Identical |
| I.S. EN ISO 14130:1998 | Identical |
| PN EN ISO 14130 : 2001 | Identical |
| SS-EN ISO 14130:1998 | Identical |
| BS EN ISO 14130:1998 | Identical |
| EN ISO 14130:1997 | Identical |
| DIN EN ISO 14130:1998-02 | Identical |
| UNE-EN ISO 14130:1999 | Identical |
| DIN EN 16582-2:2015-11 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| ISO 11119-1:2012 | Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| 13/30279623 DC : 0 | BS EN 16582-2 - DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENT INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| BS ISO 1268-4 : 2005 | FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 4: MOULDING OF PREPREGS |
| BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| I.S. EN 16582-2:2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| BS EN 13706-3:2002 | Reinforced plastics composites. Specifications for pultruded profiles Specific requirements |
| EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| I.S. EN ISO 14692-2:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017) |
| 13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
| ISO 11119-4:2016 | Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| 15/30253325 DC : 0 | BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| DIN EN ISO 10350-2:2011-06 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
| NF EN 12245 : 2009 + A1 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| NBR 15708-5 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
| BS ISO 13781:2017 | Implants for surgery. Homopolymers, copolymers and blends on poly(lactide). In vitro degradation testing |
| ISO 13781:2017 | Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing |
| ISO 15814:1999 | Implants for surgery — Copolymers and blends based on polylactide — In vitro degradation testing |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
| ISO 14692-2:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| BS EN 13706-2:2002 | Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
| BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
| EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ONORM EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| I.S. EN ISO 10350-2:2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| 07/30165210 DC : 0 | BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
| BS EN 16582-2:2015 | Domestic swimming pools Specific requirements including safety and test methods for inground pools |
| 15/30296854 DC : 0 | BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING |
| 12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
| ISO 11119-2:2012 | Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| EN ISO 14692-2:2017 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| EN 13706-3:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements |
| EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| ISO 1268-4:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs |
| ISO 11119-3:2013 | Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| UNE-ISO 1268-4:2012 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
| UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
| UNE-EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| UNE-EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| ASME RTP-1 : 2017 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| ISO 1268:1974 | Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes |
| EN ISO 2818:1996 | Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| ISO 2602:1980 | Statistical interpretation of test results — Estimation of the mean — Confidence interval |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 5893:2002 | Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.