ISO 1458:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Metallic coatings Electrodeposited coatings of nickel
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
13-04-2019
English, French
02-12-2002
ISO 1458 specifies requirements for nickel electrodeposited coatings that are applied to iron and steel, to zinc alloys, to copper or copper alloys, and to aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. In addition, it specifies requirements for copper plus nickel coatings applied to iron and steel, and to zinc alloys. Coating designations that differ in thickness and type are specified and guidance is given in selecting the coating appropriate to the service conditions to which the coated product will be exposed.
ISO 1458 does not specify the surface condition required by the base metal prior to the coating process, and is not applicable to coatings on sheet strip or wire in the non-fabricated form nor to threaded fasteners or coil springs.
DevelopmentNote |
Supersedes ISO/DIS 1458. (12/2002)
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
BS ISO 1458:2002 | Identical |
UNE 112032:1994 | Identical |
NFA 91 101 : 1985 | Similar to |
BS 1224:1970 | Similar to |
DIN 50968:1991-01 | Similar to |
UNI ISO 1458 : 2005 | Identical |
09/30208346 DC : 0 | BS EN 4810 - AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 3 FASTENING HOLES, INCH SERIES |
BS EN 4812:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series |
15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
07/30174321 DC : 0 | BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
BS 7479:1991 | Method for salt spray corrosion tests in artificial atmospheres |
PREN 4812 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES - INCH SERIES |
EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
BS EN ISO 7384:1995 | Corrosion tests in artificial atmospheres. General requirements |
12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
09/30208355 DC : 0 | BS EN 4812 - AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES, INCH SERIES |
NF EN ISO 4042 : 1999 | FASTENERS - ELECTROPLATED COATINGS |
I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
ISO 10111:2000 | Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods |
DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
01/713017 DC : DRAFT SEP 2001 | ISO/CD 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (REVISED) |
BS 6917:1987 | Method for corrosion testing in artificial atmospheres: general principles |
DIN ISO 4042:1992-06 | THREADED COMPONENTS - ELECTROPLATED COATINGS |
BS ISO 12686:1999 | Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
ISO 4042:1999 | Fasteners Electroplated coatings |
07/30168266 DC : 0 | BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
I.S. EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS |
BS EN ISO 10111:2002 | Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods |
ISO 7384:1986 | Corrosion tests in artificial atmosphere General requirements |
BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
EN ISO 7384:1995 | Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986) |
EN 4812:2017 | Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series |
BS ISO 1456:2003 | Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium |
EN ISO 10111:2001 | Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000) |
I.S. EN 4812:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES - INCH SERIES |
GOST 9-302 : 1988 ERRATA 2007 | UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION - METAL AND NON-METAL INORGANIC COATINGS - CONTROL METHODS |
ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 3543:2000 | Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
ISO 2361:1982 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
ISO 16348:2003 | Metallic and other inorganic coatings Definitions and conventions concerning appearance |
ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 2079:1981 | Surface treatment and metallic coatings General classification of terms |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
ISO 4525:2003 | Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.