• ISO 15875-1:2003

    Current The latest, up-to-date edition.

    Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  08-12-2003

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 15875-1:2003 specifies the general aspects of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.

    It covers a range of service conditions (classes of application), design pressures and pipe dimension classes.

    It also specifies the test parameters for the test methods referred to in the standard.

    In conjunction with the other parts of ISO 15875, it is applicable to PE-X pipes, fittings and their joints, including joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 138/SC 2
    Development Note Supersedes ISO/DIS 15875-1.2 (12/2003)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 21003-1:2008-11 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    ISO 21004:2006 Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply
    UNI EN ISO 21003-1 : 2009 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    07/30160797 DC : 0 BS EN 15632-3 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    DD ISO/TS 26873 : 2010 PLASTICS PIPES AND FITTINGS - DEFINITION AND CONSTRUCTION PROCEDURES FOR REFERENCE LINES
    BS ISO 18566-1:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems Vocabulary, symbols, technical specifications and requirements
    07/19990369 DC : 0 BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
    DIN EN 15632-3:2015-03 District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods (includes Amendment A1:2014)
    ISO 18566-1:2017 Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 1: Vocabulary, symbols, technical specifications and requirements
    BS EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings General
    BS EN 15632-2 : 2010 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    11/30197617 DC : 0 BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION
    07/30160794 DC : 0 BS EN 15632-2 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    07/30168416 DC : 0 BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    UNI EN 806-2 : 2008 SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
    UNI EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    DIN EN 15632-2:2015-03 District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods (includes Amendment A1:2014)
    NBR 15939-1 : 2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 1: REQUIREMENTS AND TEST METHODS
    ISO/TS 26873:2010 Plastics pipes and fittings Definition and construction procedures for reference lines
    ONORM EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    BS EN 15632-3 : 2010 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 21003-1:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    I.S. EN 15632-2:2010 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS
    I.S. EN 15632-3:2010 DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS
    05/30132152 DC : DRAFT APR 2005 ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
    DIN EN 806-2:2005-06 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    DIN EN 1264-4:2009-11 Water based surface embedded heating and cooling systems - Part 4: Installation
    DIN EN 14868:2005-11 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    DIN EN 14868 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    BS EN ISO 15875-3:2003 Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fittings
    BS EN ISO 15875-2:2003 (published 2007-07) Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Pipes
    BS EN 14868 : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
    16/30310170 DC : DRAFT MAR 2016 BS ISO 18566-1 - BUILDING ENVIRONMENT DESIGN - DESIGN, TEST METHODS AND CONTROL OF HYDRONIC RADIANT HEATING AND COOLING PANEL SYSTEMS - PART 1: DEFINITION, SYMBOLS, TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    ISO 15875-3:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
    ISO 15875-2:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
    UNE-EN 1264-4:2010 Water based surface embedded heating and cooling systems - Part 4: Installation
    ISO 15875-5:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
    BS EN ISO 15875-5:2003 Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fitness for purpose of the system
    BS EN 806-2:2005 Specifications for installations inside buildings conveying water for human consumption Design
    BS EN 1264-4:2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    I.S. EN 1264-4:2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    EN ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
    EN ISO 15875-2:2003/A1:2007 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES
    I.S. EN ISO 15875-2:2004 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES
    EN ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
    EN 14868 : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    EN ISO 21003-1 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    EN 15632-2:2010+A1:2014 (edition 2) District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods
    EN 15632-3:2010+A1:2014 (edition 2) District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods
    ONORM EN ISO 21003-1 : 2012 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008)

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 15875-2:2003/A1:2007 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES
    EN 806-1:2000/A1:2001 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
    EN ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
    ISO 15875-2:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
    ISO 472:2013 Plastics Vocabulary
    ENV 12108 : DRAFT JAN 2001 PLASTICS PIPING SYSTEMS - GUIDANCE FOR THE INSTALLATION INSIDE BUILDINGS OF PRESSURE SYSTEMS FOR HOT AND COLD WATER INTENDED FOR HUMAN CONSUMPTION
    ISO 10508:2006 Plastics piping systems for hot and cold water installations Guidance for classification and design
    ISO 4065:1996 Thermoplastics pipes Universal wall thickness table
    ISO 15875-3:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
    ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective