ISO 16061:2015
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Instrumentation for use in association with non-active surgical implants General requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
06-04-2021
Superseded by
Language(s)
French, English
Published date
11-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16061:2015 specifies general requirements for instruments to be used in association with non-active surgical implants. These requirements apply to instruments when they are manufactured and when they are resupplied after refurbishment.
This International Standard also applies to instruments which may be connected to power-driven systems, but does not apply to the power-driven systems themselves.
With regard to safety, this International Standard gives requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging, and information supplied by the manufacturer.
This International Standard is not applicable to instruments associated with dental implants, transendodontic and transradicular implants, and ophthalmic implants.
| DevelopmentNote |
Supersedes ISO/DIS 16061. (05/2015)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 16061:2015 | Identical |
| UNE-EN ISO 16061:2015 | Identical |
| NBN EN ISO 16061 : 2015 | Identical |
| NF EN ISO 16061 : 2015 | Identical |
| NEN EN ISO 16061 : 2015 | Identical |
| NS EN ISO 16061 : 2015 | Identical |
| I.S. EN ISO 16061:2015 | Identical |
| SN EN ISO 16061 : 2015 | Identical |
| UNI EN ISO 16061 : 2009-10 | Identical |
| BS EN ISO 16061:2015 | Identical |
| EN ISO 16061:2015 | Identical |
| DIN EN ISO 16061:2015-09 | Identical |
| GOST R ISO 16061 : 2011 | Identical |
| PN EN ISO 16061 : 2015 | Identical |
| NEN ISO 16061 : 2000 | Identical |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| 14/30270462 DC : 0 | BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| I.S. EN ISO 5840-1:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015) |
| ISO 16142-1:2016 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| BS ISO 16142-1:2016 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| DIN EN ISO 9713:2009-08 | Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO 9713:2002) |
| BS EN ISO 9713:2009 | Neurosurgical implants. Self-closing intracranial aneurysm clips |
| EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| EN ISO 5840-1:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| I.S. EN ISO 9713:2009 | NEUROSURGICAL IMPLANTS - SELF-CLOSING INTRACRANIAL ANEURYSM CLIPS |
| I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
| NF EN ISO 9713 : 2009 | NEUROSURGICAL IMPLANTS - SELF-CLOSING INTRACRANIAL ANEURYSM CLIPS |
| UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| 16/30339831 DC : 0 | PD ISO/TR 14283 - IMPLANTS FOR SURGERY - ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| 04/300654 DC : DRAFT JAN 2004 | BS EN ISO 14630 - NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| BS EN ISO 5840-1:2015 | Cardiovascular implants. Cardiac valve prostheses General requirements |
| UNE-EN 16372:2015 | Aesthetic surgery services |
| 12/30254927 DC : 0 | BS EN 16372 - AESTHETIC SURGERY SERVICES |
| UNE-EN ISO 5840-1:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| DIN EN ISO 5840-1:2015-12 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| AAMI ISO 5840-1 : 2016 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16372:2014 | AESTHETIC SURGERY SERVICES |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| 14/30290166 DC : 0 | BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| ISO 5840-2:2015 | Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes |
| UNE-EN ISO 14630:2013 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| EN 16372:2014 | Aesthetic surgery services |
| UNI EN ISO 9713 : 2009 | NEUROSURGICAL IMPLANTS - SELF-CLOSING INTRACRANIAL ANEURYSM CLIPS |
| EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| EN ISO 9713:2009 | Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO 9713:2002) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| BS EN 16372:2014 | Aesthetic surgery services |
| ONORM EN ISO 5840-2 : 2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| ISO/TR 14283:2018 | Implants for surgery Essential principles of safety and performance |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| ISO 9713:2002 | Neurosurgical implants Self-closing intracranial aneurysm clips |
| ISO 5840-1:2015 | Cardiovascular implants Cardiac valve prostheses Part 1: General requirements |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 5832-11:2014 | Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 11138-3:2017 | Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 10993-13:2010 | Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices |
| ISO 5832-6:1997 | Implants for surgery Metallic materials Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 7151:1988 | Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 5832-5:2005 | Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 15883-3:2006 | Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers |
| ISO 5832-3:2016 | Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| EN 2318:1992 | Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm < or = a or D < or = 150 mm |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| EN 2326:1992 | Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D < or = 200 mm |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| ISO 4957:1999 | Tool steels |
| ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| EN 2127:1992 | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D < or = 100 mm |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| ISO 5832-8:1997 | Implants for surgery Metallic materials Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy |
| ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
| ISO 10993-14:2001 | Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics |
| ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
| ISO 5832-4:2014 | Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy |
| ISO 10993-18:2005 | Biological evaluation of medical devices Part 18: Chemical characterization of materials |
| ISO/TS 10993-19:2006 | Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
| ISO 18472:2006 | Sterilization of health care products Biological and chemical indicators Test equipment |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 5832-2:1999 | Implants for surgery Metallic materials Part 2: Unalloyed titanium |
| ISO 5832-7:2016 | Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 7740:1985 | Instruments for surgery Scalpels with detachable blades Fitting dimensions |
| EN 2100:1992 | Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm |
| ISO 8319-2:1986 | Orthopaedic instruments — Drive connections — Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws |
| ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| EN 2128:1992 | Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm < or = a or D < or = 75 mm |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| EN 2384:1992 | Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D < or = 150 mm |
| ISO 15883-2:2006 | Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| ISO 5832-12:2007 | Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 5832-9:2007 | Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.