I.S. EN ISO 15630-3:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
BS 7568-9:1992
|
Press tools Guides for round punches |
12/30265690 DC : 0
|
BS ISO 8404 - TOOLS FOR MOULDING - ANGLE PINS |
BS 7568-7:1992
|
Press tools Round punches with 60° conical head and straight shank |
11/30227254 DC : 0
|
BS ISO 9714-1 - ORTHOPAEDIC DRILLING INSTRUMENTS - PART 1: DRILL BITS, TAPS AND COUNTERSINK CUTTERS |
BS ISO 8404:2013
|
Tools for moulding. Angle pins |
ONORM EN ISO 15630-3 : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
10/30234616 DC : 0
|
BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
BS 7564-4:1992
|
Tools for moulding Mould guide bushes, headed, and locating guide bushes, headed |
DIN ISO 8404:2014-12
|
Tools for moulding - Angle pins (ISO 8404:2013) |
DIN ISO 8406:2010-05
|
Tools for moulding - Mould bases - Round locating elements and spacers (ISO 8406:2008) |
PREN 10051 : DRAFT 2009
|
HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
ADA 64 : 86(R1994)
|
DENTAL EXPLORERS |
NF EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS |
ISO 6605:2017
|
Hydraulic fluid power — Test methods for hoses and hose assemblies |
BS EN ISO 3452-3:2013
|
Non-destructive testing. Penetrant testing Reference test blocks |
BS EN 28050:1992
|
Ferronickel ingots or pieces. Sampling for analysis |
IEC 62326-20:2016
|
Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
BS EN 13631-4:2002
|
Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives |
BS EN 14420-7:2013
|
Hose fittings with clamp units Cam locking couplings |
EN 12011 : 1998
|
INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
DIN ISO 10072:2005-09
|
Tools for moulding - Sprue bushes - Dimensions (ISO 10072:2004) |
DIN ISO 10071-2:2006-03
|
TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY |
EN 62878-1-1:2015
|
Device embedded substrate - Part 1-1: Generic specification - Test methods |
NBR ISO 7153-1 : 1997 ERRATA 2010
|
SURGICAL INSTRUMENTS - METALLIC MATERIALS - PART 1: STAINLESS STEEL |
I.S. EN 28049:1993
|
FERRONICKEL SHOT - SAMPLING FOR ANALYSIS |
UNE-EN ISO 16061:2015
|
Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
BS ISO 9181:2007
|
Tools for pressing. Round punches with 60° conical head and reduced shank |
BS ISO 8406:2008
|
Tools for moulding. Mould bases. Round locating elements and spacers |
BS EN 62326-20:2016
|
Printed boards Printed circuit boards for high-brightness LEDs |
10/30234631 DC : 0
|
BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
BS ISO 10071-2:2005
|
Tools for pressing. Ball-lock punches Ball-lock punches for heavy duty |
BS ISO 10071-1:2008
|
Tools for pressing. Ball-lock punches Ball-lock punches for light duty |
BS 7568-8:1992
|
Press tools Round matrixes |
BS ISO 9714-1:2012
|
Orthopaedic drilling instruments Drill bits, taps and countersink cutters |
BS 7568-10:1992
|
Press tools Round punches with 60° conical head and reduced shank |
BS ISO 8018:2007
|
Tools for moulding. Guide bushes, headed, and locating guide bushes, headed |
02/708199 DC : DRAFT JUN 2002
|
ISO/DIS 10072 - TOOLS FOR MOULDING - SPRUE BUSHES - DIMENSIONS |
09/30200092 DC : 0
|
BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
DIN EN ISO 16061:2015-09
|
Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
ISO 9181:2007
|
Tools for pressing Round punches with 60 degrees conical head and reduced shank |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |
DIN EN ISO 3452-3:2014-03
|
NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
ISO 8049:2016
|
Ferronickel shot Sampling for analysis |
ISO 18265:2013
|
Metallic materials — Conversion of hardness values |
I.S. EN 14420-8:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
DIN EN 14420-8:2016-06
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
DIN EN 10088-1:2014-12
|
Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
I.S. EN ISO 6945:1996
|
RUBBER HOSES - DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER |
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
DIN EN 14420-7:2013-09
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
I.S. EN ISO 3452-3:2013
|
NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
I.S. EN 10088-1:2014
|
STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
I.S. EN 14420-7:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
VDI 3388:2012-03
|
Materials for trimming and forming dies |
BS 328-1:1993
|
Drills and reamers Specification for twist drills |
VDI 3357:2014-01
|
Sliding elements in large stamping dies |
12/30259888 DC : 0
|
BS EN ISO 3452-3 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS |
13/30285624 DC : 0
|
BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
BS 7568-6:1992
|
Press tools Round punches with cylindrical head and straight shank |
ISO 10071-1:2008
|
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty |
BS ISO 6605:2017
|
Hydraulic fluid power. Test methods for hoses and hose assemblies |
BS ISO 8017:2007
|
Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
ISO 10072:2004
|
Tools for moulding — Sprue bushes — Dimensions |
04/30116589 DC : DRAFT JUL 2004
|
ISO/DIS 11054 - CUTTING TOOLS - DESIGNATION OF HIGH-SPEED STEEL GROUPS |
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
BS ISO 16915:2003
|
Tools for moulding. Sprue pullers |
17/30352970 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
ISO 16915:2003
|
Tools for moulding Sprue pullers |
ISO 5949:1983
|
Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
UNI EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
BS 7564-8:1992
|
Tools for moulding Angle pins. Basic dimensions |
ISO 11054:2006
|
Cutting tools — Designation of high-speed steel groups |
BS EN ISO 6945:1996
|
Rubber hoses. Determination of abrasion resistance of the outer cover |
UNE-EN 14420-7:2014
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
BS 5194-1:1985
|
Surgical instruments Specification for stainless steels |
EN ISO 3452-3:2013
|
NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
UNI EN 10051 : 2011
|
CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
UNI EN 14420-7 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
UNI EN 10088-1 : 2014
|
STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
DIN ISO 16915:2005-09
|
Tools for moulding - Sprue pullers (ISO 16915:2003) |
ISO 3685:1993
|
Tool-life testing with single-point turning tools |
I.S. EN 12011:1998
|
INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
ISO 7741:1986
|
Instruments for surgery — Scissors and shears — General requirements and test methods |
PREN 14420-7 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
BS 7564-1:1992
|
Tools for moulding Bases-locating elements |
BS ISO 10072:2004
|
Tools for moulding. Sprue bushes. Dimensions |
BS EN ISO 16061:2015
|
Instrumentation for use in association with non-active surgical implants. General requirements |
UNE-EN ISO 8049:2016
|
Ferronickel shot - Sampling for analysis (ISO 8049:2016) |
BS EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
ISO 8404:2013
|
Tools for moulding Angle pins |
ISO 8688-2:1989
|
Tool life testing in milling — Part 2: End milling |
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
18/30368675 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN ISO 3452-3:2014
|
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
ISO 9714-1:2012
|
Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters |
ISO 8406:2008
|
Tools for moulding — Mould bases — Round locating elements and spacers |
ISO 10071-2:2005
|
Tools for pressing Ball-lock punches Part 2: Ball-lock punches for heavy duty |
I.S. EN 62878-1-1:2015
|
DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS |
I.S. EN ISO 16061:2015
|
INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
ISO 8017:2007
|
Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
DIN EN 1097-2:2016-07 (Draft)
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
I.S. EN 1097-2:2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
ISO 16061:2015
|
Instrumentation for use in association with non-active surgical implants General requirements |
BS EN 12011:1998
|
Instrumentation to be used in association with non-active surgical implants. General requirements |
UNI EN 1097-2 : 2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN 13630-4:2002
|
Explosives for civil uses. Detonating cords and safety fuses Determination of sensitiveness to impact of detonating cords |
BS EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
ISO 3452-3:2013
|
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
BS EN 28049:1992
|
Ferronickel shot. Sampling for analysis |
EN 28049:1992
|
Ferronickel shot - Sampling for analysis (ISO 8049:1988) |
EN ISO 6945:1996/A1:2000
|
RUBBER HOSES - DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER |
EN ISO 8049:2016
|
Ferronickel shot - Sampling for analysis (ISO 8049:2016) |
BS 5194-1(1991) : 1991
|
SURGICAL INSTRUMENTS - SPECIFICATION FOR STAINLESS STEEL |
EN 13631-4 : 2002
|
EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 4: DETERMINATION OF SENSITIVENESS TO IMPACT OF EXPLOSIVES |
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN 14420-7:2013
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
EN 28050:1992
|
Ferronickel ingots or pieces - Sampling for analysis (ISO 8050:1988) |
EN 14420-8:2013+A1:2016
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
BS 5173-103.9(1986) : 1986
|
METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - PHYSICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER |
16/30320762 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
I.S. EN ISO 8049:2016
|
FERRONICKEL SHOT - SAMPLING FOR ANALYSIS (ISO 8049:2016) |
11/30254165 DC : 0
|
BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
BS EN ISO 8049:2016
|
Ferronickel shot. Sampling for analysis |
16/30312462 DC : 0
|
BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
PREN 14420-8 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
BS EN 62878-1-1:2015
|
Device embedded substrate Generic specification. Test methods |
I.S. EN 62326-20:2016
|
PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS |
PREN 10088-1 : DRAFT 2011
|
STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
DIN EN ISO 15630-3 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
ISO 4948-2:1981
|
Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
ISO 8018:2007
|
Tools for moulding Guide bushes, headed, and locating guide bushes, headed |
EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
UNE-EN 10088-1:2015
|
Stainless steels - Part 1: List of stainless steels |
BS EN 14420-8 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
BS EN 10088-1:2014
|
Stainless steels List of stainless steels |
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
UNI EN ISO 3452-3 : 2014
|
NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS |
EN ISO 16061:2015
|
Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
EN 62326-20:2016
|
Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
DIN ISO 10071-1:2010-11
|
Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2008) |
UNE-EN 14420-8:2014
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |