ISO 16063-21:2003
Current
Current
The latest, up-to-date edition.
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
19-08-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16063-21:2003 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can be applied between other levels in the calibration hierarchy.
ISO 16063-21:2003 specifies procedures for performing calibrations of rectilinear vibration transducers by comparison in the frequency range from 0,4 Hz to 10 kHz. It is primarily intended for those who are required to meet ISO standardized methods for the measurement of vibration under laboratory conditions, where the uncertainty of measurement is relatively small. It can also be used under field conditions, where the uncertainty of measurement may be relatively large.
From knowledge of all significant sources of uncertainty affecting the calibration, the expanded uncertainty can be evaluated using the methods given in ISO 16063-21. It also covers the assessment of uncertainties for calibrations performed using a check standard.
| DevelopmentNote |
Supersedes ISO/DIS 16063-21 (08/2003) Supersedes ISO 5347-3 (09/2003)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 16063-21 : 2003 | Identical |
| GOST ISO 16063-21 : 2013 | Identical |
| DIN ISO 16063-21:2016-08 | Identical |
| BS ISO 16063-21 : 2003 | Identical |
| GOST R ISO 16063-21 : 2009 | Identical |
| BS ISO 16063-21:2003+A1:2016 | Identical |
| BS ISO 16063-45:2017 | Methods for the calibration of vibration and shock transducers In-situ calibration of transducers with built in calibration coil |
| BS ISO 16063-22 : 2005 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| 16/30341458 DC : 0 | BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL |
| 09/30191459 DC : 0 | BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS |
| BS EN 15657:2017 | Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
| UNI EN 15657-1 : 2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
| I.S. EN 15657-1:2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| DKD-R 3-1-1 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| BS EN ISO 10846-4:2003 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
| BS ISO 10302-2:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
| ISO 16063-45:2017 | Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil |
| 05/30064424 DC : DRAFT NOV 2005 | ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD) |
| BS ISO 16063-43:2015 | Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification |
| DIN EN 14366:2005-02 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| ECMA 275 : 3ED 2015 | MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| DIN EN 15657-1:2009-10 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| DKD-R 3-1-3 : 2003 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG |
| DIN EN 15657:2016-02 (Draft) | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| 14/30313008 DC : 0 | BS ISO 16063-43 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION |
| BS ISO 13373-2:2016 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Processing, analysis and presentation of vibration data |
| 16/30341489 DC : 0 | BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS |
| DIN EN ISO 10846-5:2009-07 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ANSI S12.11-2 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| I.S. EN 14366:2005 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| EN 15657:2017 | Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
| UNI EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| 03/315162 DC : DRAFT SEP 2003 | ISO 16063-22 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22 - SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| 04/302070 DC : DRAFT JAN 2004 | BS ISO 13373-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, PRESENTATION AND ANALYSIS OF VIBRATION DATA |
| ISO 16063-31:2009 | Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity |
| 05/30103114 DC : DRAFT NOV 2005 | ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD |
| DKD-R 3-1-4 : 2005 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 4: PRIMAERKALIBRIERUNG VON SCHWINGUNGSMESSGERAE-TEN MIT SINUSFOERMIGER ANREGUNG UND INTERFEROMETRISCHER MESSUNG DER SCHWIN-GUNGSGROESSE |
| I.S. EN 15657:2017 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| I.S. EN ISO 10846-5:2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 16063-22:2005 | Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer |
| ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
| ISO 13373-2:2016 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data |
| DIN EN ISO 10846-4:2004-02 | Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003 |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| EN 15657-1:2009 | Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| EN ISO 10846-4:2003 | Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) |
| EN ISO 10846-5:2009 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| DIN ISO 16063-22:2015-04 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-22:2005 + AMD.1:2014) |
| BS EN 15657-1:2009 | Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| BS EN ISO 10846-5:2009 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| BS ISO 16063-41:2011 | Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers |
| 17/30289056 DC : 0 | BS ISO 16063-33 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 33: TESTING OF MAGNETIC FIELD SENSITIVITY |
| ISO 16063-43:2015 | Methods for the calibration of vibration and shock transducers Part 43: Calibration of accelerometers by model-based parameter identification |
| ISO 16063-41:2011 | Methods for the calibration of vibration and shock transducers Part 41: Calibration of laser vibrometers |
| BS ISO 21289:2008 | Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data |
| BS ISO 16063-31:2009 | Methods for the calibration of vibration and shock transducers Testing of transverse vibration sensitivity |
| 16/30333609 DC : 0 | BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| NF EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| BS EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| ISO 21289:2008 | Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| DIN EN 15657:2017-10 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| DKD-R 3-1-2 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 2: STOSSANREGUNG |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ECA 4-02 : 2013 | EVALUATION OF THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 16063-1:1998 | Methods for the calibration of vibration and shock transducers Part 1: Basic concepts |
| ISO 16063-11:1999 | Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.