• There are no items in your cart

ISO 16110-1:2007

Current

Current

The latest, up-to-date edition.

Hydrogen generators using fuel processing technologies Part 1: Safety

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

09-03-2007

ISO 16110-1:2007 applies to packaged, self-contained or factory matched hydrogen generation systems with a capacity of less than 400 m3/h at 0 C and 101,325 kPa, herein referred to as hydrogen generators, that convert an input fuel to a hydrogen-rich stream of composition and conditions suitable for the type of device using the hydrogen (e.g. a fuel cell power system or a hydrogen compression, storage and delivery system).

It applies to hydrogen generators using one or a combination of the following input fuels:

natural gas and other methane-rich gases derived from renewable (biomass) or fossil fuel sources, e.g. landfill gas, digester gas, coal mine gas;

fuels derived from oil refining, e.g. diesel, gasoline, kerosene, liquefied petroleum gases such as propane and butane;

alcohols, esters, ethers, aldehydes, ketones, Fischer-Tropsch liquids and other suitable hydrogen-rich organic compounds derived from renewable (biomass) or fossil fuel sources, e.g. methanol, ethanol, di-methyl ether, biodiesel;

gaseous mixtures containing hydrogen gas, e.g. synthesis gas, town gas.

ISO 16110-1:2007 is applicable to stationary hydrogen generators intended for indoor and outdoor commercial, industrial, light industrial and residential use.

It aims to cover all significant hazards, hazardous situations and events relevant to hydrogen generators, with the exception of those associated with environmental compatibility (installation conditions), when they are used as intended and under the conditions foreseen by the manufacturer.

DevelopmentNote
Supersedes ISO/DIS 16110-1. (03/2007)
DocumentType
Standard
Pages
75
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
UNI ISO 16110-1:2022 Identical
NEN ISO 16110-1 : 2007 Identical
BS ISO 16110-1:2007 Identical
UNE-ISO 16110-1:2015 Identical
NF ISO 16110-1 : 2009 Identical

PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
NFPA 2:2023 Hydrogen Technologies Code
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
08/30152625 DC : DRAFT APR 2008 BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)

IEC 61025:2006 Fault tree analysis (FTA)
ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 15649:2001 Petroleum and natural gas industries — Piping
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
ASME B31.1 : 2016 POWER PIPING
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ASTM G 146 : 2001 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
ISO 9587:2007 Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
SA TS 19883:2020 Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD)
IEC 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ASME B31.3:2016 PROCESS PIPING
IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
ISO 13943:2017 Fire safety — Vocabulary
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
ISO 15330:1999 Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
ISO 15724:2001 Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
AWS A4.3 : 1993 DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING
ISO 5388:1981 Stationary air compressors Safety rules and code of practice
ASTM B 849 : 2002 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 14847:1999 Rotary positive displacement pumps Technical requirements
IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
ISO 7539-6:2011 Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
ISO 9588:2007 Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
ISO 14121:1999 Safety of machinery Principles of risk assessment
SAE AMS 2759/9 : 2009 HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
IEC TS 61000-3-4:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
ASME CODE CASE B & PV : 2017 CODE CASES: BOILERS AND PRESSURE VESSELS
API 934-A : 2008 MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
IEC 62086-1:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ASTM F 2078 : 2015 : REDLINE Standard Terminology Relating to Hydrogen Embrittlement Testing
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 3690:2012 Welding and allied processes Determination of hydrogen content in arc weld metal
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
ISO 2626:1973 Copper Hydrogen embrittlement test
ASTM F 1624 : 2012-11 TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 4080:2009 Rubber and plastics hoses and hose assemblies Determination of permeability to gas
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
ASTM F 326 : 1996 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
SAE USCAR 5 : 2012 AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL
BS ISO 17081 : 2004 METHOD OF MEASUREMENT OF HYDROGEN PERMEATION AND DETERMINATION OF HYDROGEN UPTAKE AND TRANSPORT IN METALS BY AN ELECTROCHEMICAL TECHNIQUE
ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
SAE AMS 2451/4D : 2017 PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT
IEC 60335-2-41:2012 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors

View more information
€185.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.