Skip to content
Please enter a keyword to search

  • NF ISO 16110-1 : 2009

    Current The latest, up-to-date edition.

    HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Avant-propos
    Introduction
    1 Domaine d'application
    2 Références normatives
    3 Termes et définitions
    4 Exigences de sécurité et mesures de protection
      4.1 Analyse de sécurité et de fiabilité
      4.2 Configuration
      4.3 Environnement physique et conditions de fonctionnement
      4.4 Exigences de conception
      4.5 Sélection des matériaux
      4.6 Équipements sous pression et tuyaux
      4.7 Prévention contre les phénomènes dangereux
           d'incendie et d'explosion
      4.8 Prévention des phénomènes dangereux électriques
      4.9 Compatibilité électromagnétique (CEM)
      4.10 Systèmes de controle et éléments de protection/sécurité
      4.11 Appareils pneumatiques et hydrauliques
      4.12 Vannes
      4.13 Appareils rotatifs
      4.14 Capotages
      4.15 Systèmes et matériaux d'isolation thermique
      4.16 Utilitaires
      4.17 Installation et maintenance
    5 Méthodes d'essai
      5.1 Incertitudes de mesure
      5.2 Carburants et pressions d'essai
      5.3 Montages d'essai de base
      5.4 Essais de type/qualification
      5.5 Essais de routine
    6 Marquage, étiquetage et emballage
      6.1 Marquage du générateur d'hydrogène
      6.2 Marquage des composants
      6.3 Documentation technique du produit
    Annexe A (informative) - Phénomènes dangereux et
             situations dangereuses significatifs abordés
             dans la présente Norme internationale
    Annexe B (informative) - Carburation et compatibilité
             matérielle avec l'utilisation d'hydrogène
    Annexe C (informative) - Recyclage des générateurs
             d'hydrogène
    Annexe D (informative) - Considérations relatives à
             l'installation des générateurs d'hydrogène
    Bibliographie

    Abstract - (Show below) - (Hide below)

    La présente partie de l'ISO 16110 s'applique aux systèmes de génération d'hydrogène conditionnés, autonomes ou adaptables en sortie usine, d'une capacité inférieure à 400 m[3]/h à 0 degrés C et 101,325 kPa, appelés ci-après générateurs d'hydrogène permettant de convertir un carburant d'entrée en gaz riche en hydrogène, de composition et de conditions adaptées aux dispositifs fonctionnant à l'hydrogène (systèmes d'alimentation à pile à combustible ou systèmes de compression, de stockage et de distribution d'hydrogène, par exemple).

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: M58-002-1. PR NF ISO 16110-1 July 2009. (07/2009)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61025:2006 Fault tree analysis (FTA)
    ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
    ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
    IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
    ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
    IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
    IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
    IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
    IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
    ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    IEC 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
    ISO 13943:2017 Fire safety — Vocabulary
    ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
    ISO/TS 16528:2002 Boilers and pressure vessels Registration of Codes and Standards to promote international recognition
    IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
    ISO 5388:1981 Stationary air compressors Safety rules and code of practice
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    ISO 14847:1999 Rotary positive displacement pumps Technical requirements
    IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
    IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
    IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 14121:1999 Safety of machinery Principles of risk assessment
    IEC TS 61000-3-4:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
    IEC 62086-1:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    ISO 4080:2009 Rubber and plastics hoses and hose assemblies Determination of permeability to gas
    IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60335-2-41:2012 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective