ISO 18119:2018
Current
The latest, up-to-date edition.
Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
25-05-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time.
This document is applicable to seamless steel and seamless aluminium-alloy transportable gas cylinders (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity from 0,5 l up to 150 l and to seamless steel and seamless aluminium-alloy transportable gas tubes (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity greater than 150 l. It also applies, as far as practical, to cylinders of less than 0,5 l water capacity.
This document does not apply to the periodic inspection and maintenance of acetylene cylinders or to the periodic inspection and testing of composite cylinders.
NOTE Unless noted by exception, the use of the word "cylinder" in this document refers to both cylinders and tubes.
| Committee |
ISO/TC 58/SC 4
|
| DevelopmentNote |
Supersedes ISO 6406 and ISO 10461. (05/2018)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 18119:2021 | Identical |
| PN-EN ISO 18119:2019 | Identical |
| ÖNORM EN ISO 18119: 2019 04 15 | Identical |
| NEN-EN-ISO 18119:2018 | Identical |
| SN EN ISO 18119:2019 | Identical |
| NF EN ISO 18119 : 2018 | Identical |
| SS-EN ISO 18119:2018 | Identical |
| EN ISO 18119:2018 | Identical |
| UNE-EN ISO 18119:2020 | Identical |
| DS/EN ISO 18119:2018 | Identical |
| NS-EN ISO 18119 : 2018 | Identical |
| DIN EN ISO 18119:2019-02 | Identical |
| UNI EN ISO 18119:2024 | Identical |
| BS EN ISO 18119:2018 | Identical |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 25760:2009 | Gas cylinders — Operational procedures for the safe removal of valves from gas cylinders |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ISO 10893-12:2011 | Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 11621:1997 | Gas cylinders — Procedures for change of gas service |
| ISO 10298:2010 | Determination of toxicity of a gas or gas mixture |
| CGA C 20 : 2014 | REQUALIFICATION STANDARD FOR METALLIC, DOT AND TC 3-SERIES GAS CYLINDERS AND TUBES USING ULTRASONIC EXAMINATION |
| ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| ISO/TR 22694:2008 | Gas cylinders Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 6506-4:2014 | Metallic materials — Brinell hardness test — Part 4: Table of hardness values |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
| ISO 22434:2006 | Transportable gas cylinders Inspection and maintenance of cylinder valves |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| ISO 12710:2002 | Non-destructive testing Ultrasonic inspection Evaluating electronic characteristics of ultrasonic test instruments |
| ISO 11363-2:2017 | Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 13338:2017 | Gas cylinders Gases and gas mixtures Determination of tissue corrosiveness for the selection of cylinder valve outlets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.