ISO 13412:1997
|
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series |
ISO 13414:1997
|
Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series |
BS EN 2535:2011
|
Aerospace series. Vacuum deposition of cadmium |
ISO 14212:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series |
ABMA ISO 14211 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
ABMA ISO 14210 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
ISO 13416:1997
|
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series |
93/706720 DC : 0
|
PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
ISO 4042:1999
|
Fasteners Electroplated coatings |
ABMA ISO 13417 : 1997
|
AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES |
I.S. EN 2535:2011
|
AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
ISO 14208:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series |
ABMA ISO 14218 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES |
SAE J 1648 : 2013
|
PROTECTIVE COATINGS FOR FASTENERS |
EN ISO 4042:1999
|
FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999) |
BS EN ISO 4042:2000
|
Fasteners. Electroplated coatings |
ASTM B 767 : 1988 : R2016
|
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
DIN EN 15330-2:2015-09 (Draft)
|
SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
BS EN ISO 7384:1995
|
Corrosion tests in artificial atmospheres. General requirements |
EN 2133:2010
|
Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
ABMA ISO 13413 : 1998
|
AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES |
ABMA ISO 14221 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, LIGHT DUTY - INCH SERIES |
ISO 13415:1997
|
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series |
ISO 14203:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series |
15/30326242 DC : 0
|
BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
16/30340972 DC : 0
|
BS EN ISO 27830 ED 2.0 - METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS |
ABMA ISO 14220 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, LIGHT DUTY - INCH SERIES |
ABMA ISO 14202 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES |
PREN 2535 : 200P1
|
AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
ASTM B 767 : 1988 : R2010
|
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
ABMA ISO 14209 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES |
ABMA ISO 14217 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
ABMA ISO 14206 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES |
ABMA ISO 14216 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES |
ABMA ISO 13416 : 1997
|
AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES |
ISO 14214:1998
|
Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series |
ASTM B 767 : 1988 : R1994
|
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
ASTM B 766 : 1986 : R1998
|
Standard Specification for Electrodeposited Coatings of Cadmium |
ASTM B 767 : 1988 : R2006
|
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
EN ISO 10111 : 2001
|
METALLIC AND OTHER INORGANIC COATINGS - MEASUREMENT OF MASS PER UNIT AREA - REVIEW OF GRAVIMETRIC AND CHEMICAL ANALYSIS METHODS |
I.S. EN 15330-2:2017
|
SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
I.S. EN 2133:2010
|
AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
UNI EN 2133 : 2011
|
AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
ABMA ISO 14208 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES |
ABMA ISO 14201 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES 2 - METRIC SERIES |
ABMA ISO 14204 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES |
PREN 15330-2 : DRAFT 2015
|
SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
ABMA ISO 14213 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES |
ISO 14206:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series |
ISO 13417:1997
|
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series |
BS 6338:1982
|
Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
ISO 14197:1998
|
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series |
ISO 14194:1998
|
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series |
ISO 10111:2000
|
Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods |
DIN EN ISO 4042:2001-01
|
FASTENERS - ELECTROPLATED COATINGS |
ABMA ISO 14194 : 1998
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, HEAVY DUTY - INCH SERIES |
ABMA ISO 14193 : 1998
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, INTERMEDIATE DUTY - INCH SERIES |
ASTM B 766 : 1986 : R2003
|
Standard Specification for Electrodeposited Coatings of Cadmium |
ISO 14191:1998
|
Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series |
ISO 14192:1998
|
Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series |
ISO 10721-2:1999
|
Steel structures — Part 2: Fabrication and erection |
ISO 14196:1998
|
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series |
ONORM EN 2535 : 2011
|
AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
ABMA ISO 14192 : 1998
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES |
ABMA ISO 13415 : 1997
|
AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES |
BS 6917:1987
|
Method for corrosion testing in artificial atmospheres: general principles |
ASTM B 766 : 1986 : R2015
|
Standard Specification for Electrodeposited Coatings of Cadmium |
DIN ISO 4042:1992-06
|
THREADED COMPONENTS - ELECTROPLATED COATINGS |
BS 6060:1981
|
Specification for nipple-type lubrication fittings for earth-moving machinery |
ONORM EN 2133 : 2011
|
AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
16/30339916 DC : 0
|
BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
17/30366369 DC : 0
|
BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
07/30168266 DC : 0
|
BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
ISO 13413:1997
|
Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series |
I.S. EN ISO 4042:1999
|
FASTENERS - ELECTROPLATED COATINGS |
NF EN ISO 4042 : 1999
|
FASTENERS - ELECTROPLATED COATINGS |
I.S. EN ISO 27830:2017
|
METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS (ISO 27830:2017) |
ABMA ISO 14219 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
ISO 14216:1998
|
Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series |
BS EN ISO 10111:2002
|
Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods |
EN ISO 27830:2017
|
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017) |
ISO 14210:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series |
ISO 14204:1998
|
Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series |
ISO 4520:1981
|
Chromate conversion coatings on electroplated zinc and cadmium coatings |
ISO 7384:1986
|
Corrosion tests in artificial atmosphere General requirements |
BS EN 2133:2010
|
Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
EN 15330-2:2017
|
Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces |
EN ISO 7384 : 1995
|
CORROSION TEST IN ARTIFICIAL ATMOSPHERE - GENERAL REQUIREMENTS |
EN 2535:2011
|
Aerospace series - Vacuum deposition of cadmium |
ABMA ISO 14214 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES |
ISO 14209:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series |
BS ISO 27830 : 2008
|
METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS |
ABMA ISO 14207 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, LIGHT DUTY - INCH SERIES |
ABMA ISO 14191 : 1997
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES |
ABMA ISO 13412 : 1998
|
AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES |
UNI EN 2535 : 2012
|
AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
ABMA ISO 13414 : 1998
|
AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES |
ABMA ISO 14197 : 1997
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, INTERMEDIATE DUTY - INCH SERIES |
ABMA ISO 14195 : 1998
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
ABMA ISO 14212 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES |
ABMA ISO 14203 : 1998
|
AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES |
ISO 14201:1998
|
Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series |
ABMA ISO 14196 : 1998
|
AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES |
ISO 27830:2017
|
Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings |
ASTM B 766 : 1986 : R2008
|
Standard Specification for Electrodeposited Coatings of Cadmium |
ASTM B 767 : 1988 : R2001
|
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
ABMA ISO 14215 : 1997
|
AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
ISO 14202:1998
|
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series |
BS EN ISO 27830:2017
|
Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings |
GOST 9-302 : 1988 ERRATA 2007
|
UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION - METAL AND NON-METAL INORGANIC COATINGS - CONTROL METHODS |
ISO 14217:1998
|
Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series |
BS EN 15330-2:2017
|
Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces |
DIN EN 15330-2:2017-09
|
SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |