EN 1277:2003
|
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
ISO 580:2005
|
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating |
EN 681-4:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS |
ISO 2507-2:1995
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes |
ISO 3451-1:2008
|
Plastics Determination of ash Part 1: General methods |
ISO 12091:1995
|
Structured-wall thermoplastics pipes Oven test |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
ISO 8773:2006
|
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) |
ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces |
ISO 8772:2006
|
Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) |
ISO 11173:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Staircase method |
ISO 2507-1:1995
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method |
ISO 3127:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method |
ISO 161-1:1996
|
Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
PREN 15346 : DRAFT 2013
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN 12061:1999
|
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
ISO 9002:1994
|
Quality systems — Model for quality assurance in production, installation and servicing |
EN 922:1994
|
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions |
ISO 21138-2:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
EN 1979:1999
|
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
ISO 22088-3:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 14741:2006
|
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ISO 4435:2003
|
Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) |
ISO 9967:2016
|
Thermoplastics pipes Determination of creep ratio |
EN 1905:1998
|
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
EN 1053:1995
|
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
ISO 21138-1:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes, fittings and system |
ISO 13967:2009
|
Thermoplastics fittings Determination of ring stiffness |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 9969:2016
|
Thermoplastics pipes Determination of ring stiffness |
EN 1437:2002
|
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
EN 12256:1998
|
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
EN 12099:1997
|
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
ISO 9852:2007
|
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method |
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method |
EN 1446 : 1996
|
PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RING FLEXIBILITY |