ISO 21438-3:2010
Current
The latest, up-to-date edition.
Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
30-07-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 21438-3:2010 specifies a method for the determination of the time-weighted average mass concentration of soluble particulate fluorides and hydrofluoric acid (HF) in workplace air by collection of the particulate fluorides on a pre-filter and HF on an alkali-impregnated filter and analysis by ion chromatography.
The method is only applicable to determination of particulate fluorides that are soluble using the sample preparation procedure specified.
For aerosol sampling, the method is applicable to the personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling.
The method is applicable to the determination of masses of 0,005 mg to at least 1,25 mg of particulate fluorides per sample and 0,012 5 mg to at least 1,2 mg of HF per sample.
The concentration range of particulate fluorides and HF in air for which the measuring procedure is applicable is determined by the sampling method selected by the user. For a 120 l air sample, the working range is approximately 0,04 mg m-3 to at least 10 mg m-3 for particulate fluorides and approximately 0,13 mg m-3 to at least 10 mg m-3 for HF.
HF can react with co-sampled particulate matter on the pre-filter, causing an interference on the measured concentration.
| DevelopmentNote |
Supersedes ISO/DIS 21438-3. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| GOST R ISO 21438-3 : 2012 | Identical |
| NF ISO 21438-3 : 2010 | Identical |
| NEN ISO 21438-3 : 2010 | Identical |
| UNI ISO 21438-3:2022 | Identical |
| BS ISO 21438-3:2010 | Identical |
| BS EN ISO 10882-1:2011 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles |
| 13/30261099 DC : 0 | BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
| BS ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders |
| DIN EN ISO 15011-1:2010-03 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009) |
| I.S. EN ISO 10882-1:2011 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011) |
| 15/30317142 DC : 0 | BS EN ISO 15011-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| DIN EN ISO 10882-1:2012-01 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator\'s breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| DIN EN ISO 15011-1:2015-03 (Draft) | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| UNE-EN ISO 10882-1:2012 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| UNI EN ISO 10882-1 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES |
| PREN 13205 : DRAFT 2010 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| 12/30259163 DC : 0 | BS EN 13205-1 - WORKPLACE EXPOSURE - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 21438-2:2009 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| 07/30140385 DC : 0 | BS EN ISO 15011-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHODS FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS |
| ISO 21438-2:2009 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| ISO 10882-1:2011 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles |
| EN ISO 10882-1:2011 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| 11/30228336 DC : 0 | BS EN 13205 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders |
| ASTM E 1370 : 2014 : REDLINE | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| EN 12919:1999 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ISO 7708:1995 | Air quality — Particle size fraction definitions for health-related sampling |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| ISO 8756:1994 | Air quality Handling of temperature, pressure and humidity data |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| CEN/TR 15230:2005 | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 8655-2:2002 | Piston-operated volumetric apparatus Part 2: Piston pipettes |
| EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN 1540:2011 | Workplace exposure - Terminology |
| EN 1232:1997 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
| ISO 8655-6:2002 | Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.