ISO 2144:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
27-06-2019
Superseded by
Language(s)
French, English
Published date
11-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 2144:2015 describes the determination of the residue on ignition of pulps, papers, and boards. The International Standard is applicable to all types of pulp, paper, and board. The lower limit of the determination is about 0,2 %.
NOTE The procedure (Clause 7) requires that at least 10 mg of residue is weighed. The limit stated above corresponds to a 5 g sample. If the sample size is increased, this limit can be lowered.
| DevelopmentNote |
Supersedes ISO/FDIS 2144. (05/2015)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS ISO 2144:2015 | Identical |
| IS 1060 : Part 4 : Sec 3 : 2018 | Identical |
| NF ISO 2144 : 2015 | Identical |
| SS-ISO 2144:2015 | Identical |
| UNE 57050:2003 | Identical |
| NFQ 03 047 : 1971 | Similar to |
| NEN ISO 2144 : 1998 | Identical |
| UNI 6445 : 1986 | Similar to |
| BS 3631:1984 | Similar to |
| DIN VDE 0311-20 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; METHODS OF TEST |
| INCITS/ISO/IEC 15457-1 : 2011 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| BS EN 60641-2:2004 | Pressboard and presspaper for electrical purposes Methods of tests |
| ISO 15592-3:2008 | Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 02/702750 DC : DRAFT FEB 2002 | ISO/DIS 15592-3 - FINE-CUT TOBACCO AND SMOKING ARTICLES MADE FROM IT - METHODS OF SAMPLING, CONDITIONING AND ANALYSIS - PART 3: DETERMINATION OF TOTAL PARTICULATE MATTER OF SMOKING ARTICLES USING A ROUTINE ANALYTICAL SMOKING MACHINE |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 06/30154066 DC : 0 | BS ISO/IEC 15457-1 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| CSA ISO/IEC 15457-1 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| NF EN 60554-2 : 2003 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS 5626-2:1979 | Cellulosic papers for electrical purposes Methods of test |
| TAPPI T 211 : 2002 : R2012 | ASH IN WOOD, PULP, PAPER AND PAPERBOARD: COMBUSTION AT 525 DEGREES C |
| I.S. EN 60641-2:2004 | SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| ISO 2846-3:2002 | Graphic technology Colour and transparency of printing ink sets for four-colour-printing Part 3: Publication gravure printing |
| UNE-ISO 2846-1:2014 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Part 1: Sheet-fed and heat-set web offset lithographic printing |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| 05/30127939 DC : DRAFT JAN 2005 | ISO 2834-1 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 1: PASTE INKS |
| BS 5354-2:1994 | Specification for laminated pressboard for electrical purposes Methods of test |
| BS ISO 2846-5:2005 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing Flexographic printing |
| CEI EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| I.S. EN 60763-2:2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| IEC 60554-2:2001 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| DIN EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| NFZ 43 085 : 96 XP | MICROGRAPHICS - A6 SIZE APERTURE CARDS |
| 01/121744 DC : DRAFT APR 2001 | ISO/DIS 2846-3 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR-PRINTING - PART 3: PUBLICATION GRAVURE PRINTING |
| BS ISO 27668-1:2017 | Gel ink ball pens and refills General use |
| 07/30170826 DC : DRAFT AUG 2007 | BS ISO 15592-3 - FINE-CUT TOBACCO AND SMOKING ARTICLES MADE FROM IT - METHODS OF SAMPLING, CONDITIONING AND ANALYSIS - PART 3: DETERMINATION OF TOTAL PARTICULATE MATTER OF SMOKING ARTICLES USING A ROUTINE ANALYTICAL SMOKING MACHINE, PREPARATION FOR THE DETERMINATION OF WATER AND NICOTINE, AND CALCULATION OF NICOTINE-FREE DRY PARTICULATE MATTER |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| BS ISO 2846-1:2017 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing Sheet-fed and heat-set web offset lithographic printing |
| TAPPI T 211 : 2002 | ASH IN WOOD, PULP, PAPER AND PAPERBOARD: COMBUSTION AT 525 DEGREES C |
| CSA ISO/IEC 15457-1 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| ISO 2834:1999 | Graphic technology Test print preparation for offset and letterpress inks |
| ISO 27668-1:2017 | Gel ink ball pens and refills — Part 1: General use |
| IEC 60763-2:2007 | Specification for laminated pressboard - Part 2: Methods of test |
| BS 6091-2:1987 | Vulcanized fibre for electrical purposes Methods of test |
| BS ISO/IEC 15457-1:2001 | Identification cards. Thin flexible cards Physical characteristics |
| BS ISO 2834:1999 | Graphic technology. Test print preparation for offset and letterpress inks |
| BS ISO 15592-3:2008 | Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter |
| ISO 14145-1:2017 | Roller ball pens and refills — Part 1: General use |
| DIN ISO 15592-3:2011-07 | Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter (ISO 15592-3:2008) |
| BS ISO 2846-4:2000 | Graphic technology. Colour and transparency of ink sets for four-colour-printing Screen printing |
| CEI EN 60641-2 : 2005 | PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 16/30339155 DC : 0 | BS ISO 2846-1 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR PRINTING - PART 1: SHEET-FED AND HEAT-SET WEB OFFSET LITHOGRAPHIC PRINTING |
| 08/30176450 DC : DRAFT JAN 2008 | BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| NF EN 60763-2 : 2016 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| UNE-ISO 15592-3:2012 | Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| ISO 2846-5:2005 | Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 5: Flexographic printing |
| ISO 10549:2000 | Micrographics A6 size aperture cards |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| EN 753-1 : 1997 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - GENERAL TECHNICAL SPECIFICATIONS |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| 03/311479 DC : DRAFT JULY 2003 | ISO 2846-5 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR PRINTING - PART 5: FLEXOGRAPHIC PRINTING |
| ISO 2846-1:2017 | Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing |
| NF EN 60641-2 : 2005 | PRESSBOARD AND PRESS PAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TESTS |
| 01/203394 DC : DRAFT MAY 2001 | IEC 60641-2 - PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS EN 60763-2:2007 | Specification for laminated pressboard Methods of test |
| BS EN 60554-2:2002 | Cellulosic papers for electrical purposes Methods of test |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| TAPPI T 211 : 2002 : R2007 | ASH IN WOOD, PULP, PAPER AND PAPERBOARD: COMBUSTION AT 525 DEGREES C |
| ISO 2846-4:2000 | Graphic technology Colour and transparency of printing ink sets for four-colour-printing Part 4: Screen printing |
| ISO 12757-1:2017 | Ball point pens and refills — Part 1: General use |
| IEC 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| BS EN 753-1:1997 | Identification card systems. Intersector thin flexible cards General technical specifications |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| EN 60763-2:2007 | Specification for laminated pressboard - Part 2: Methods of test |
| EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| EN 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.