ISO 21771:2007
Current
The latest, up-to-date edition.
Gears — Cylindrical involute gears and gear pairs — Concepts and geometry
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
28-08-2007
ISO 21771:2007 specifies the geometric concepts and parameters for cylindrical gears with involute helicoid tooth flanks. Flank modifications are included. It also covers the concepts and parameters for cylindrical gear pairs with parallel axes and a constant gear ratio, which consist of cylindrical gears according to it. Gear and mating gear in these gear pairs have the same basic rack tooth profile.
DevelopmentNote |
Supersedes ISO/DIS 21771 and ISO TR 4467. (08/2007)
|
DocumentType |
Standard
|
Pages |
83
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN ISO 21771 : 2007 | Identical |
DIN ISO 21771:2014-08 | Identical |
BS ISO 21771:2007 | Identical |
DIN ISO 21771 E : 2014 | Identical |
UNI ISO 21771:2024 | Identical |
BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
PD ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Examples of calculation for micropitting |
ISO/TR 6336-30:2017 | Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 |
VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
DIN 3970:2010-04 | Master gears for checking cylindrical gears - Gear blanks and gearing |
ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
PD ISO/TR 6336-30:2017 | Calculation of load capacity of spur and helical gears Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 |
UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
PD ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Introduction and basic principles |
ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles |
EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
ISO 1328-2:1997 | Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
ISO 701:1998 | International gear notation Symbols for geometrical data |
DIN 867:1986-02 | BASIC RACK FOR INVOLUTE TEETH OF CYLINDRICAL GEARS FOR GENERAL ENGINEERING AND HEAVY ENGINEERING |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
AGMA 2002 : B | TOOTH THICKNESS AND BACKLASH MEASUREMENT OF CYLINDRICAL INVOLUTE GEARING |
ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.