ISO 25378:2011
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) Characteristics and conditions Definitions
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
29-03-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 25378:2011 defines general terms for geometrical specifications, characteristics and conditions. These definitions are based on concepts developed in ISO 17450-1 and ISO 22432 and they are given by using a mathematical description based on Annex B of ISO 17450-1:2011.
ISO 25378:2011 is not intended for industrial use as such among designers, but is aimed to serve as the "road map" mapping out the requirements based on geometrical features, thus enabling future standardization for industry and software makers in a consistent manner.
ISO 25378:2011 defines general types of geometrical characteristics and conditions which can be used in GPS. These descriptions are applicable to
- a workpiece,
- an assembly,
- a population of workpieces, and
- a population of assemblies.
These definitions are based on concepts of operators and the duality principle contained in ISO 17450-1 and ISO/TS 17450-2 and on the description of types of geometrical features defined in ISO 22432.
Conceptually, these specification operators can be used as specification operators or as verification operators (duality principle).
ISO 25378:2011 is not intended to define GPS specifications, symbology or other types of expression.
| DevelopmentNote |
Supersedes ISO/DIS 25378. (03/2011)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 25378 : 2011 | Identical |
| NBN EN ISO 25378 : 2011 | Identical |
| NEN EN ISO 25378 : 2011 | Identical |
| NS EN ISO 25378 : 2011 | Identical |
| I.S. EN ISO 25378:2011 | Identical |
| PN EN ISO 25378 : 2011 | Identical |
| SN EN ISO 25378 : 2011 | Identical |
| UNI EN ISO 25378 : 2011 | Identical |
| UNE-EN ISO 25378:2012 | Identical |
| BS EN ISO 25378:2011 | Identical |
| EN ISO 25378:2011 | Identical |
| DIN EN ISO 25378:2011-12 | Identical |
| UNE-EN ISO 25378:2011 | Identical |
| 14/30272936 DC : 0 | BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES |
| ISO 17450-4:2017 | Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations |
| BS EN ISO 17450-3:2016 | Geometrical product specifications (GPS). General concepts Toleranced features |
| I.S. EN ISO 17450-4:2018 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017) |
| I.S. EN ISO 17450-3:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016) |
| DIN EN ISO 1101:2017-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| EN ISO 14253-1:2017 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
| DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
| I.S. EN ISO 1101:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| UNE-EN ISO 17450-3:2017 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| 16/30333694 DC : 0 | BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS |
| 15/30284673 DC : 0 | BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION |
| I.S. EN ISO 14253-1:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017) |
| UNE-EN ISO 14253-1:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
| ISO 17450-3:2016 | Geometrical product specifications (GPS) General concepts Part 3: Toleranced features |
| BS EN ISO 1101:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN ISO 17450-3:2016 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| 16/30317593 DC : 0 | BS EN ISO 20170 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DECOMPOSITION OF GEOMETRICAL CHARACTERISTICS FOR MANUFACTURING CONTROL |
| EN ISO 17450-4:2018 | Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 7966:1993 | Acceptance control charts |
| ISO/TS 17450-1:2005 | Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.