ISO 3547-2:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
20-06-2023
English
24-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3547-2:2017 specifies the test data for outside and inside diameters of wrapped bushes made of mono and multi-layer bearing material for plain bearing applications. It also specifies test designations.
Since the wall thickness of the bush is measured in the free condition, no special test data are required for this on the drawing (see ISO 3547‑5 and ISO 3547‑6).
NOTE Depending on the manufacturing method, the back of the bushes can show isolated light depressions and, similarly, bushes with lubrication holes, grooves and bore indentations can show distortion. It is therefore suggested to measure the wall thickness away from these areas.
| Committee |
ISO/TC 123/SC 3
|
| DevelopmentNote |
Together with ISO 3547-1, ISO 3547-3 and ISO 3547-4, supersedes ISO 3547. (05/2000) Supersedes ISO/DIS 3547-2. (03/2017)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS 4757 : Part 2 : 2020 | Identical |
| DIN ISO 3547-2:2019-10 | Identical |
| BS ISO 3547-2:2017 | Identical |
| NEN ISO 3547-2 : 2017 | Identical |
| DIN ISO 3547-2:2015-12 | Identical |
| SAC GB/T 12613.2 : 2002 | Identical |
| GOST ISO 3547-2 : 2006 | Identical |
| ISO 3547-7:2007 | Plain bearings Wrapped bushes Part 7: Measurement of wall thickness of thin-walled bushes |
| 05/30123222 DC : DRAFT JAN 2005 | ISO 3547-1 - PLAIN BEARINGS - WRAPPED BUSHES - PART 1: DIMENSIONS |
| DIN ISO 3547-6:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 6: CHECKING THE INSIDE DIAMETER (ISO 3547-6:2007) |
| 16/30340333 DC : 0 | BS ISO 3547-4 - PLAIN BEARINGS - WRAPPED BUSHES - PART 4: MATERIALS |
| 06/30145675 DC : DRAFT SEP 2006 | ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
| 16/30323124 DC : 0 | BS ISO 20054 - PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS |
| BS ISO 3547-5:2007 | Plain bearings. Wrapped bushes Checking the outside diameter |
| BS ISO 3547-1:2006 | Plain bearings. Wrapped bushes Dimensions |
| ISO 3547-6:2007 | Plain bearings Wrapped bushes Part 6: Checking the inside diameter |
| ISO 12307-2:2000 | Plain bearings Checking of wrapped bushes Part 2: Checking the inside diameter |
| ISO 3547-1:2006 | Plain bearings Wrapped bushes Part 1: Dimensions |
| BS ISO 12307-2:2000 | Plain bearings. Checking of wrapped bushes Checking the inside diameter |
| 06/30145669 DC : DRAFT JULY 2006 | ISO 3547-6 - PLAIN BEARINGS - WRAPPED BUSHES - PART 6: CHECKING THE INSIDE DIAMETER |
| DIN ISO 3547-5:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007) |
| ISO 16287:2005 | Plain bearings Thermoplastic bushes Dimensions and tolerances |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| DIN ISO 3547-7:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 7: MEASUREMENT OF WALL THICKNESS OF THIN-WALLED BUSHES (ISO 3547-7:2007) |
| 05/30123234 DC : DRAFT JAN 2005 | ISO 3547-4 - PLAIN BEARINGS - WRAPPED BUSHES - PART 4: MATERIALS |
| 06/30145672 DC : DRAFT JULY 2006 | ISO 3547-7 - PLAIN BEARINGS - WRAPPED BUSHES - PART 7: MEASUREMENT OF WALL THICKNESS OF THIN-WALLED BUSHES |
| DIN ISO 3547-4:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 4: MATERIALS (ISO 3547-4:2006) |
| DIN ISO 3547-1:2015-12 | Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:2006) |
| BS ISO 16287:2005 | Plain bearings. Thermoplastic bushes. Dimensions and tolerances |
| 05/30123229 DC : DRAFT JAN 2005 | ISO 3547-3 - PLAIN BEARINGS - WRAPPED BUSHES - PART 3: LUBRICATION HOLES, GROOVES AND INDENTATIONS |
| 03/317167 DC : DRAFT OCT 2003 | ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES |
| ISO 3547-4:2017 | Plain bearings Wrapped bushes Part 4: Materials |
| 06/30145636 DC : DRAFT JULY 2006 | ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER |
| BS ISO 3547-6:2007 | Plain bearings. Wrapped bushes Checking the inside diameter |
| BS ISO 3547-3:2017 | Plain bearings. Wrapped bushes Lubrication holes, grooves and indentations |
| ISO 3547-3:2017 | Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations |
| BS ISO 12301:2007 | Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| 16/30340342 DC : 0 | BS ISO 3547-1 - PLAIN BEARINGS - WRAPPED BUSHES - PART 1: DIMENSIONS |
| BS ISO 3547-4:2017 | Plain bearings. Wrapped bushes Materials |
| BS ISO 3547-7:2007 | Plain bearings. Wrapped bushes Measurement of wall thickness of thin-walled bushes |
| ISO 3547-5:2007 | Plain bearings Wrapped bushes Part 5: Checking the outside diameter |
| ISO 3547-4:2017 | Plain bearings Wrapped bushes Part 4: Materials |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| ISO 3547-1:2006 | Plain bearings Wrapped bushes Part 1: Dimensions |
| ISO 3547-6:2007 | Plain bearings Wrapped bushes Part 6: Checking the inside diameter |
| ISO 4378-1:2017 | Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties |
| ISO 3547-5:2007 | Plain bearings Wrapped bushes Part 5: Checking the outside diameter |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 4378-4:2009 | Plain bearings — Terms, definitions, classification and symbols — Part 4: Basic symbols |
| ISO 13715:2017 | Technical product documentation — Edges of undefined shape — Indication and dimensioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.