ISO 4249-1:1985
Current
The latest, up-to-date edition.
Motorcycle tyres and rims (Code-designated series) Part 1: Tyres
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
10-10-1985
This second edition cancels and replaces the first edition (1978). This part sets out the designation in use and the dimensions for an inch code designated series of tyres. It applies to tyres used in highway service with a maximum speed of 150 km/h and fitted on rims with a nominal diameter corresponding to the codes from 14 up to and including 21.
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SAC GB/T 2983 : 2015 | Identical |
PN EN ISO 4259-1 : 2018-01 | Identical |
SN EN ISO 4259-1:2018 | Identical |
NF ISO 4249-1 : 1987 | Identical |
UNI EN ISO 4259-1 : 2018 | Identical |
PN ISO 4249-1 : 2000 | Identical |
UNE-EN ISO 4259-1:2018 | Identical |
ONORM EN ISO 4259-1 : 2018 | Identical |
DIN 7802:1983-06 | Identical |
BS AU50-1.6B(1977) : 1977 | Similar to |
SS-EN ISO 4259-1:2017 | Identical |
DIN 7802:1983-06 | Corresponds |
BS AU 50-1.6.2c:2002 | Tyres and wheels. Tyres. Motorcycle tyres Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres |
BS AU 50-1.0.1:1999 | Tyres and wheels. Tyres. General Method of test for measuring tyre uniformity |
DIN EN 16029:2012-08 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
ISO 5751-1:2010 | Motorcycle tyres and rims (metric series) — Part 1: Design guides |
DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
BS ISO 10231 : 2003 | MOTORCYCLE TYRES - TEST METHODS FOR VERIFYING TYRE CAPABILITIES |
BS AU 50-1.6.1c:2002 | Tyres and wheels. Tyres. Motorcycle tyres Specification of general requirements and design guide for designations, dimensions and load ratings for metric series tyres - Section 6: Motorcycle tyres Subsection 6.1c: Specification for general requirements and design guide for designations, dimensions and load-carrying capacity for metric series tyres |
09/30211248 DC : 0 | BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES |
BS ISO 5751-2:2010 | Motorcycle tyres and rims (metric series) Tyre dimensions and load-carrying capacities |
ISO 5751-3:2010 | Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours |
BS ISO 5751-1:2010 | Motorcycle tyres and rims (metric series) Design guides |
09/30202630 DC : 0 | BS ISO 4249-3 - MOTORCYCLE TYRES AND RIMS (CODE-DESIGNATED SERIES) - PART 3: RIMS |
UNE-EN 16029:2013 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
BS ISO 4249-3:2010 | Motorcycle tyres and rims (code-designated series) Rims |
04/30084609 DC : DRAFT APR 2004 | ISO 18164 - TRUCK, BUS, PASSENGER-CAR AND MOTORCYCLE TYRES - METHODS OF MEASURING ROLLING RESISTANCE |
03/312718 DC : DRAFT AUG 2003 | ISO 5751-3 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 3: RANGE OF APPROVED RIM CONTOURS |
BS AU 50-1.6.8:2000 | Tyres and wheels. Tyres. Motorcycle tyres Method of measuring tyre rolling circumference for new tyres under loaded conditions - Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded conditions |
ISO 5751-2:2010 | Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
BS AU 50-1.6.7:1998 | Tyres and wheels. Tyres. Motorcycle tyres Method of test for measuring rolling resistance |
ISO 18164:2005 | Passenger car, truck, bus and motorcycle tyres — Methods of measuring rolling resistance |
09/30202633 DC : 0 | BS ISO 5751-1 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 1: DESIGN GUIDES |
BS AU 50-1.6.3a:1995 | Tyres and wheels. Tyres. Motorcycle tyres Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres |
BS EN 16029:2012 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Single-track two-wheel motor vehicles. Safety requirements and test methods |
BS ISO 5751-3:2010 | Motorcycle tyres and rims (metric series) Range of approved rim contours |
03/312563 DC : DRAFT JULY 2003 | ISO 5751-1 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 1: DESIGN GUIDES |
UNI EN 16029 : 2012 | RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 16029:2012 | RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
EN 16029:2012 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
09/30202636 DC : 0 | BS ISO 5751-2 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 2: TYRE DIMENSIONS AND LOAD-CARRYING CAPACITIES |
09/30202639 DC : 0 | BS ISO 5751-3 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 3: RANGE OF APPROVED RIM CONTOURS |
03/312564 DC : DRAFT JULY 2003 | ISO 5751-2 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 2: TYRE DIMENSIONS AND LOAD-CARRYING CAPACITIES |
BS ISO 18164:2005 | Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance |
NF ISO 4249-3 : 2011 | MOTORCYCLE TYRES AND RIMS (CODE-DESIGNATED SERIES) - PART 3: RIMS |
ISO 4249-3:2010 | Motorcycle tyres and rims (code-designated series) Part 3: Rims |
ISO 13326:1998 | Test methods for measuring tyre uniformity |
ISO 10231:2003 | Motorcycle tyres — Test methods for verifying tyre capabilities |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.