ISO 6727:2012
|
Road vehicles Motorcycles Symbols for controls, indicators and tell-tales |
BS 2087-2:1992
|
Preservative textile treatments Methods of test |
STANAG 2375 : 0
|
VEHICLE BATTLEFIELD RECOVERY DATA - AEP-13 |
ISO 7643:1991
|
Caravans and light trailers — Trailers of categories 01 and 02 with overrun brakes — Linear bench test methods for brake controls |
BS 1916-2:1953
|
Limits and fits for engineering Guide to the selection of fits in BS 1916:Part 1 |
ISO 4081:2016
|
Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
DEFSTAN 61-17/3(1992) : 1992
|
THE REQUIREMENTS FOR THE SELECTION OF BATTERIES FOR SERVICE EQUIPMENT |
ISO 611:2003
|
Road vehicles Braking of automotive vehicles and their trailers Vocabulary |
BS AU 30b:1970
|
Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14¾ tons laden weight |
DEFSTAN 25-6/3(1973) : 1973 AMD 1
|
TOWING VEHICLES AND TOWED VEHICULAR EQUIPMENT |
ISO 3437:1975
|
Road vehicles — Determination of fuel leakage in the event of a collision |
BS AU 180-6:1982
|
Brake linings Method for assessment of seizure to ferrous mating surface due to corrosion |
BS EN 286-2:1992
|
Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
BS AU 217-1a:1987
|
Maximum road speed limiters for motor vehicles Specification for installed requirements |
ISO 9128:2006
|
Road vehicles Graphical symbols to designate brake fluid types |
BS 6086:1981
|
Method of measurement of noise inside motor vehicles |
BS 6327:1982
|
Specification for fire protection of reciprocating internal combustion engines |
ISO 3842:2006
|
Road vehicles Fifth wheels Interchangeability |
STANAG 2805 : 0
|
|
BS 2087-1:1992
|
Preservative textile treatments Specification for treatments |
BS AU 166:1977
|
Specification for road vehicles - mounting of mechanical coupling devices on rear cross members of trucks |
ISO 10011-3:1991
|
Guidelines for auditing quality systems Part 3: Management of audit programmes |
ISO 7578:2008
|
Road vehicles Sheath-type glow-plugs General requirements and test methods |
ISO 6518-1:2002
|
Road vehicles Ignition systems Part 1: Vocabulary |
STANAG 4007 : 0
|
ELECTRICAL CONNECTORS BETWEEN PRIME MOVERS, TRAILERS AND TOWED ARTILLERY |
ISO 3911:2004
|
Wheels and rims for pneumatic tyres Vocabulary, designation and marking |
BS AU 172c:1990
|
Specification for performance requirements for accessory jacks for vehicles |
STANAG 2832 : 0
|
DIMENSIONAL RESTRICTIONS FOR THE TRANSPORT OF MILITARY EQUIPMENT BY RAIL ON EUROPEAN RAILWAYS |
BS 6803-3:1990
|
Vehicle security alarm systems Code of practice for the protection of vehicles and goods in transit |
ISO 6460:1981
|
Road vehicles — Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine |
BS AU 235-2:1991
|
Fifth wheel couplings for commercial vehicles Method of testing strength of coupling pins |
BS AU 5:1963
|
Specification for dimensions of a \'contact\' type coupling for vacuum and pressure braking systems on trailers and semi-trailers |
ISO 3539:1975
|
Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11 |
ISO 4106:2012
|
Motorcycles — Engine test code — Net power |
ISO 6969:2004
|
Road vehicles Sound signalling devices Tests after mounting on vehicle |
ISO 3803:1984
|
Road vehicles — Hydraulic pressure test connection for braking equipment |
ISO 8082:2003
|
Self-propelled machinery for forestry Roll-over protective structures Laboratory tests and performance requirements |
BS 3425:1966
|
Method for the measurement of noise emitted by motor vehicles |
DEFSTAN 59-103(PT2)/1(1993) : INTERIM
|
EMI/EMP GASKET COMPONENTS - PART 2: GASKET CAPABILITY APPROVAL PROCEDURES |
ISO 7118:1981
|
Road vehicles Motorcycles Mounting of rear shock absorbers |
ISO 7399:1990
|
Motorcycles Alternating current flasher units |
ISO 8093:1985
|
Road vehicles Diagnostic testing of electronic systems |
ISO 7141:2005
|
Road vehicles Light alloy wheels Impact test |
ISO 4639-3:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
ISO 7637-3:2016
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
BS EN 3-1:1996
|
Portable fire extinguishers Description, duration of operation, class A and B fire test |
BS AU 210-1:1987
|
Drawbars for caravans and light trailers Method of calculation for the mechanical strength of steel drawbars |
DEFSTAN 25-1(PT1)/1(1975) : LATEST
|
VEHICLE BRAKING SYSTEMS - AIR PRESSURE BRAKING SYSTEMS FOR TOWING VEHICLES, TRAILERS AND OTHER TOWED EQUIPMENT |
DEFSTAN 49-4/1(1974) : 1974
|
FILTER ELEMENTS, FLUID PRESSURE (COALESCER ELEMENTS), GASOLINE AND KEROSENE FUELS |
BS EN 3-5:1996
|
Portable fire extinguishers Specification and supplementary tests |
ISO 3929:2003
|
Road vehicles Measurement methods for exhaust gas emissions during inspection or maintenance |
ISO 8703:1986
|
Road vehicles Caravans and light trailers Control device for inertia braking Calculation of forces |
BS EN 3-4:1996
|
Portable fire extinguishers Charges, minimum required fire |
ISO 7637-1:2015
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
ISO/TR 4114:1979
|
Road vehicles — Caravans and light trailers — Static load on ball couplings |
STANAG 4062 : 2016
|
SLINGING AND TIE-DOWN FACILITIES FOR LIFTING AND TYING DOWN MILITARY EQUIPMENT FOR MOVEMENT BY LAND AND SEA |
ISO 3917:2016
|
Road vehicles Safety glazing materials Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
STANAG 4074 : 2017
|
AUXILIARY POWER UNIT CONNECTIONS FOR STARTING TACTICAL LAND VEHICLES |
STANAG 2601 : 2017
|
STANDARDIZATION OF ELECTRICAL SYSTEMS IN TACTICAL LAND VEHICLES |
BS 6803-2:1986
|
Vehicle security alarm systems Code of practice for systems installed after vehicle marketing |
DEFSTAN 28-4/4(1994) : 1994
|
TESTING OF DIESEL AND GASOLINE ENGINES FOR GENERAL PURPOSE MILITARY APPLICATIONS |
BS AU 235-1:1989
|
Fifth wheel couplings for commercial vehicles Specification for test conditions and strength requirements |
ISO 7188:1994
|
Acoustics Measurement of noise emitted by passenger cars under conditions representative of urban driving |
ISO 10011-1:1990
|
Guidelines for auditing quality systems Part 1: Auditing |
ISO 4000-1:2015
|
Passenger car tyres and rims Part 1: Tyres (metric series) |
DEFSTAN 05-61(PT1)/3(1998) : 1998
|
QUALITY ASSURANCE PROCEDURAL REQUIREMENTS - PART 1: DEVIATION/PRODUCTION PERMITS AND WAIVERS/CONCESSIONS - QUALITY ASSURANCE OF SUBCONTRACT WORK |
BS 7262:1990
|
Specification for automatic safe load indicators |
ISO 4209-2:2012
|
Truck and bus tyres and rims (metric series) Part 2: Rims |
ISO 6255:1997
|
Passenger cars Rear-window washing and wiping systems Test methods |
BS AU 220:1988
|
Specification for dimensions of 50 mm drawbar couplings between commercial road vehicles and trailers |
ISO 3469:1989
|
Passenger cars — Windscreen washing systems — Test methods |
DEFSTAN 25-5/3(1983) : 1983 AMD 1
|
ROAD LIGHTING OF MINISTRY OF DEFENCE VEHICLES |
ISO 1728:2006
|
Road vehicles Pneumatic braking connections between motor vehicles and towed vehicles Interchangeability |
ISO 3006:2015
|
Road vehicles Passenger car wheels for road use Test methods |
ISO 4926:2006
|
Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids |
DEFSTAN 05-34/2(1984) : 1984
|
MARKING OF SERVICE MATERIAL |
ISO 7637-2:2011
|
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
BS AU 188:1983
|
Specification for anchorages for towing ropes, cables or bars for road vehicles |
DEFSTAN 28-5/3(1995) : 1995
|
TESTING OF ENGINES FOR GENERAL PURPOSE MILITARY APPLICATIONS USING DIESEL AND AVTUR FUELS |
BS AU 29:1964
|
Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle |
DEFSTAN 62-7/2(1981) : 1981
|
LIGHTS, LIGHT UNITS AND REFLECTORS FOR SERVICE VEHICLES |
BS 6913-8:1992
|
Operation and maintenance of earth-moving machinery Specification for common symbols for operator controls and other displays |
BS AU 180-5:1983
|
Brake linings Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material |
BS AU 215-3:1988
|
Power take offs (PTOs) Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles |
STANAG 2342 : 2005
|
MINIMUM ESSENTIAL MEDICAL EQUIPMENT AND SUPPLIES FOR MILITARY AMBULANCES AT ALL LEVELS |
ISO 3584:2001
|
Road vehicles Drawbar couplings Interchangeability |
DEFSTAN 61-15/3(1990) : 1990 AMD 1 1991
|
PRECAUTIONS AGAINST ELECTRICAL SHOCK IN MAINTENANCE AREAS |
DEFSTAN 05-54/1(1980) : 1980
|
NATO GUIDELINE FOR THE SPECIFICATION OF TECHNICAL PUBLICATIONS |
BS 5750-8:1991
|
Quality systems Guide to quality management and quality systems elements for services |
BS 5750-14:1993
|
Quality systems Guide to dependability programme management |
ISO 3832:2002
|
Passenger cars — Luggage compartments — Method of measuring reference volume |
ISO 7641-1:1983
|
Road vehicles Caravans and light trailers Calculation of the mechanical strength of the drawbar Part 1: Steel drawbars |
BS AU 152:1970
|
Specification for rear marking plates for vehicles |
ISO 2958:1973
|
Road vehicles — Exterior protection for passenger cars |
ISO 7375-2:1998
|
Road vehicles — Coiled tube assemblies for air brake connection between towing and towed vehicles — Part 2: Performance requirements |
ISO 4009:2000
|
Commercial vehicles — Location of electrical and pneumatic connections between towing vehicles and trailers |
ISO 8755:2001
|
Commercial road vehicles 40 mm drawbar eye Interchangeability |
ISO 4020:2001
|
Road vehicles — Fuel filters for diesel engines — Test methods |
STANAG 2830 : 2009
|
MATERIAL HANDLING AIDS |
BS AU 2a:1970
|
Specification for dimensions of 3½ - 4½ in diameter fifth wheel king pin for use with extra heavy duty semi-trailers |
DEFSTAN 25-8/2(1971) : 1971
|
CABLE ASSEMBLIES, INTERVEHICLE, ELECTRICAL FOR STARTING PURPOSES |
BS AU 210-2:1994
|
Drawbars for caravans and light trailers Specification for the design of aluminium drawbars and chassis |
ISO 4039:1977
|
Road vehicles — Pneumatic braking systems — Pipes, tapped holes and male fittings |
BS AU200-1(1984) : AMD 5448
|
SPRAY REDUCING DEVICES FOR HEAVY GOODS VEHICLES: SPECIFICATION FOR DESIGN OF CONTAINMENT DEVICES |
STANAG 2604 : 0
|
BRAKING SYSTEMS BETWEEN TRACTORS, DRAW BAR TRAILER AND SEMI-TRAILER EQUIPMENT COMBINATIONS FOR MILITARY USE |
BS 6604:1985
|
Code of practice for safe operation of starter batteries |
ISO 7575:1993
|
Commercial road vehicles Flat attachment wheel fixing nuts |
DEFSTAN 61-15(PT1)/1(1981) : 1981
|
PRECAUTIONS AGAINST ELECTRIC SHOCK - PART 1: STATIC SERVICING LOCATIONS |
DEFSTAN 23-8/1(1997) : 1997
|
WINTERIZATION - MILITARY LOGISTIC VEHICLES TOWED EQUIPMENT AND MECHANICAL HANDLING EQUIPMENT |
ISO 11406:2001
|
Commercial road vehicles Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers Interchangeability |
BS 302:1968
|
Specification for wire ropes for cranes, excavators and general engineering purposes |
ISO 4639-2:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
ISO 2575:2010
|
Road vehicles Symbols for controls, indicators and tell-tales |
STANAG 4009 : 0
|
INTERFACE GEOMETRY, TRACTORS AND SEMI-TRAILERS |
ISO 4249-2:1990
|
Motorcycle tyres and rims (Code-designated series) Part 2: Tyre load ratings |
BS AU 215-1:1987
|
Power take offs (PTOs) Specification for dimensions for clearance envelope for commercial road vehicles |
DEFSTAN 91-7/4(1993) : 1993
|
REFERENCE DIESEL, HIGH SULPHUR |
DEFSTAN 00-56(PT2)/2(1996) : 1996
|
SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
BS AU 219:1988
|
Specification for dimensions of 40 mm drawbar couplings between commercial road vehicles and trailers |
ISO 4925:2005
|
Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
ISO 9002:1994
|
Quality systems — Model for quality assurance in production, installation and servicing |
ISO 7117:2010
|
Motorcycles Measurement method for determining maximum speed |
ISO 362:1998
|
Acoustics Measurement of noise emitted by accelerating road vehicles Engineering method |
BS EN 60095-2:1993
|
Lead-acid starter batteries Dimensions of batteries and dimensions and marking of terminals |
BS EN 3-6:1996
|
Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 |
BS AU 3:1970
|
Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers |
BS AU 1c:1989
|
Specification for dimensions of \'50\' fifth wheel king pin for semi-trailers |
ISO 7860:1995
|
Motorcycles Methods of measuring fuel consumption |
BS AU 110a:1995
|
Specification for rubber hoses and hose assemblies for automotive air pressure braking systems |
BS AU 236:1990
|
Specification for circular electronic tachographs for road vehicles |
ISO 6786:1980
|
Road vehicles — Air braking systems — Identification of connections on units |
DEFSTAN 05-10/4(1990) : 1990
|
DRAWING PROCEDURE |
ISO 3471:2008
|
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
ISO 6120:1995
|
Road vehicles Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
DEFSTAN 42-39/2(1997) : 1997
|
EXTINGUISHERS, FIRE, CLASSIFICATION, COLOUR CODING, OPERATION AND MARKINGS |
ISO 4038:1996
|
Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings |
ISO 6970:1994
|
Motorcycles and mopeds Pollution tests Chassis dynamometer bench |
ISO 6722:2006
|
Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements |
BS AU 25:1964
|
Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle |
BS AU 141a:1971
|
Specification for the performance of diesel engines for road vehicles |
DEFSTAN 59-103(PT3)/1(1993) : INTERIM
|
EMI/EMP GASKET COMPONENTS - PART 3: GASKET TEST METHODS |
ISO 3537:2015
|
Road vehicles Safety glazing materials Mechanical tests |
STANAG 1414 : 2009
|
GUIDELINES TO ENSURE THAT CONTRACTORS DESIGN AND SUPPLY NEW EQUIPMENT CAPABLE OF USING STANDARDIZED FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
ISO 9004:2009
|
Managing for the sustained success of an organization A quality management approach |
BS AU 217-2:1989
|
Maximum road speed limiters for motor vehicles Specification for system and component requirements |
ISO 7628-1:1998
|
Road vehicles Thermoplastics tubing for air braking systems Part 1: Dimensions and marking |
BS AU 40-4a:1966
|
Specification for motor vehicle lighting and signalling equipment Sealed beam headlamps |
DEFSTAN 25-4/2(1978) : 1978
|
KINGPINS, FIFTH WHEEL |
BS AU 26:1964
|
Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle |
BS 833:1970
|
Specification for radio interference limits and measurements for the electrical ignition systems of internal combustion engines |
STANAG 4145 : 1991
|
NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4 |
ISO 3996:1995
|
Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
BS AU 138a:1980
|
Specification for dimensions of \'contact\' type couplings for air pressure braking systems on trailers and semi-trailers and their towing vehicles, and the arrangement of these couplings on articulated and drawbar combinations |
ISO 3808:2002
|
Road vehicles Unscreened high-voltage ignition cables General specifications, test methods and requirements |
DEFSTAN 25-1/2(191993) : 1993
|
VEHICLE BRAKING SYSTEMS, HOSE ASSEMBLIES AND AIR BRAKE COUPLING ADAPTORS, BRAKE, INTERVEHICULAR |
BS AU 190:1983
|
Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg |
ISO 4249-3:2010
|
Motorcycle tyres and rims (code-designated series) Part 3: Rims |
ISO 3853:1994
|
Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test |
ISO 7638:1985
|
Road vehicles Brake anti-lock device connector |
BS AU 113c:1978
|
Specification for dimensional characteristics of coupling ball for caravans and light trailers |
ISO 7398:1990
|
Motorcycles Direct current flasher units |
ISO 7644:1988
|
Road vehicles Measurement of opacity of exhaust gas from compression-ignition (diesel) engines Lug-down test |
ISO 3784:1976
|
Road vehicles — Measurement of impact velocity in collision tests |
ISO 3984:2004
|
Road vehicles Rear moving barrier impact test procedure |
BS AU 145d:1998
|
Specification for retroreflecting number plates |
ISO 1102:2001
|
Commercial road vehicles — 50 mm drawbar eye — Interchangeability |
ISO 7375-1:1986
|
Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions |
ISO 3470:1989
|
Passenger cars — Windscreen demisting systems — Test method |
DEFSTAN 00-56(PT1)/2(1996) : 1996
|
SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
DEFSTAN 25-10/3(1989) : 1989 AMD 1 1991
|
|
DEFSTAN 49-3/2(1977) : 1977
|
PERFORMANCE REQUIREMENTS AND TEST METHODS FOR FILTER SEPARATORS, GASOLINE AND KEROSENE FUELS |
BS AU 199a:1997
|
Specification for location of hand controls, indicators and tell-tales in passenger cars |
DEFSTAN 59-103(PT4)/1(1993) : INTERIM
|
EMI/EMP GASKET COMPONENTS - PART 4: GASKET/FLANGE DESIGN CONSIDERATIONS |
DEFSTAN 05-57/4(2000) : 2000
|
CONFIGURATION MANAGEMENT OF DEFENSE MATERIAL |
ISO 6597:2005
|
Road vehicles Hydraulic braking systems, including those with electronic control functions, for motor vehicles Test procedures |
BS EN 3-3:1996
|
Portable fire extinguishers Construction, resistance to pressure, mechanical tests |
ISO 7591:1982
|
Road vehicles Retro-reflective registration plates for motor vehicles and trailers Specification |
ISO 8717:2000
|
Commercial road vehicles — Fifth wheel couplings — Strength tests |
ISO 3780:2009
|
Road vehicles — World manufacturer identifier (WMI) code |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 7975:2006
|
Passenger cars Braking in a turn Open-loop test method |
BS EN 60810:2015
|
Lamps for road vehicles. Performance requirements |
ISO 3267:1991
|
Road vehicles — Headlamp cleaners |
ISO 3779:2009
|
Road vehicles — Vehicle identification number (VIN) — Content and structure |
ISO 4513:2010
|
Road vehicles Visibility Method for establishment of eyellipses for driver's eye location |
ISO 3409:1975
|
Passenger cars — Lateral spacing of foot controls |
BS AU 145a:1972
|
Specification for reflex-reflecting number plates |
ISO 612:1978
|
Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions |
BS AU 143f:1996
|
Specification for symbols for controls, indicators and tell-tales for road vehicles |
ISO 1724:2003
|
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
DEFSTAN 25-1(PT2)/1(1975) : 1975
|
VEHICLE BRAKING SYSTEMS - HOSE ASSEMBLIES BRAKE INTERVEHICULAR |
ISO 303:2002
|
Road vehicles Installation of lighting and light signalling devices for motor vehicles and their trailers |
DEFSTAN 00-56/1(1991) : 1991
|
HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT |
ISO 9003:1994
|
Quality systems Model for quality assurance in final inspection and test |
ISO 4182:1999
|
Motor vehicles Measurement of variations in dipped-beam headlamp angle as a function of load |
DEFSTAN 01-5/13(2002) : 2002
|
FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
DEFSTAN 08-46/2(2002) : 2002 AMD 2 2004
|
THE ELECTRIC, MAGNETIC AND ELECTROMAGNETIC ENVIRONMENT |
ISO 3560:2013
|
Road vehicles — Frontal fixed barrier or pole impact test procedure |
ISO 4249-1:1985
|
Motorcycle tyres and rims (Code-designated series) Part 1: Tyres |
BS 2573-2:1980
|
Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
ISO 3888-2:2011
|
Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance |
STANAG 4395 : 0
|
CONNECTOR FOR TACTICAL LAND WHEELED VEHICLES WITH ANTI LOCK BRAKING SYSTEMS |
ISO 3538:1997
|
Road vehicles — Safety glazing materials — Test methods for optical properties |
BS AU 205:1986
|
Method of test for effect of braking on steady state cornering behaviour of road vehicles |
ISO 4091:2003
|
Road vehicles Connectors for the electrical connection of towing and towed vehicles Definitions, tests and requirements |
ISO 3888-1:1999
|
Passenger cars Test track for a severe lane-change manoeuvre Part 1: Double lane-change |
DEFSTAN 28-9/2(1995) : 1995
|
TESTING OF ENGINES FOR MILITARY VEHICLE APPLICATIONS USING DIESEL AND/OR AVTUR FUELS |
ISO 4082:1981
|
Road vehicles — Motor vehicles — Flasher units |
ISO 2534:1998
|
Road vehicles Engine test code Gross power |
ISO 4639-1:1987
|
Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
ISO 4000-2:2013
|
Passenger car tyres and rims Part 2: Rims |
BS EN 60095-4:1993
|
Lead-acid starter batteries Dimensions of batteries for heavy commercial vehicles |
DEFSTAN 23-1/4(1985) : 1985 AMD 1
|
`B' VEHICLES SUPPLEMENTARY ACCESSORIES |
DEFSTAN 00-3/3(1985) : 1985
|
DESIGN GUIDANCE FOR THE TRANSPORTABILITY OF EQUIPMENT |
ISO 6826:1997
|
Reciprocating internal combustion engines Fire protection |
DEFSTAN 99-4/1(1973) : 1973
|
PLATES, IDENTIFICATION FOR VEHICLES, TRAILERS AND TRANSPORTABLE CONTAINERS |
ISO 1585:1992
|
Road vehicles Engine test code Net power |
ISO 3958:1996
|
Passenger cars — Driver hand-control reach |
ISO 3731:2003
|
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage |
ISO 4209-1:2001
|
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
DEFSTAN 00-32(PT1)/1(1985) : 1985
|
SYSTEMATIC APPROACH TO VEHICLE ELECTRONICS (SAVE) - PART 1: GENERAL REQUIREMENTS |
STANAG 2872 : 2015
|
MEDICAL DESIGN REQUIREMENTS FOR MILITARY MOTOR AMBULANCES |
ISO 1185:2003
|
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
DEFSTAN 61-15(PT2)/1(1982) : 1982
|
PRECAUTIONS AGAINST ELECTRIC SHOCK - PART 2: MOBILE FACILITIES |
STANAG 2927 : 0
|
MARKING OF RESTRAINT EQUIPMENT FOR ROAD MOVEMENT |
ISO 6310:2009
|
Road vehicles Brake linings Compressive strain test methods |
BS 3408:1992
|
Specification for tarpaulins |
ISO 4086:2001
|
Road vehicles 90 semi-trailer fifth wheel kingpin Interchangeability |
BS AU 27:1964
|
Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle |
ISO 3468:2014
|
Passenger cars Windscreen defrosting and demisting systems Test method |
ISO 2416:1992
|
Passenger cars — Mass distribution |
ISO 1103:2007
|
Road vehicles — Coupling balls for caravans and light trailers — Dimensions |
STANAG 1135 : 2017
|
INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
BS AU 180-2:1982
|
Brake linings Method for measurement of internal shear strength of lining material |
DEFSTAN 58-6/1(1991) : 1991
|
|
SAE J 844 : 2012
|
NONMETALLIC AIR BRAKE SYSTEM TUBING |
STANAG 4050 : 0
|
SYMBOLS DESIGNATING FUNCTION OF CONTROLS IN MILITARY VEHICLES |
ISO 7642:1991
|
Caravans and light trailers — Trailers of categories 01 and 02 with overrun brakes — Inertia bench test methods for brakes |
BS AU200-2(1984) : AMD 5449
|
SPRAY REDUCING DEVICES FOR HEAVY GOODS VEHICLES: SPECIFICATION FOR PERFORMANCE OF SUPPRESSION MATERIAL AND DEVICES, AND AIR WATER SEPARATING MATERIAL AND DEVICES |
ISO 6311:1980
|
Road vehicles Brake linings Internal shear strength of lining material Test procedure |
ISO 7309:1985
|
Road vehicles Hydraulic braking systems ISO reference petroleum base fluid |
DEFSTAN 03-2/3(1995) : 1995
|
CLEANING AND PREPARATION OF METAL SURFACES |
BS 5676:1979
|
Vocabulary for reciprocating internal combustion engines |
BS 6525:1984
|
Specification for design and construction of reservoirs used in hydraulic fluid power systems |
ISO 6549:1999
|
Road vehicles Procedure for H- and R-point determination |
BS AU 181:1982
|
Specification for interface dimensions for demountable vehicle body systems |
ISO 3894:2015
|
Road vehicles — Wheels/rims for commercial vehicles — Test methods |
DEFSTAN 59-103(PT1)/1(1993) : INTERIM
|
EMI/EMP GASKET COMPONENTS - PART 1: GENERAL REQUIREMENTS |
ISO 6856:2005
|
Road vehicles Unscreened high-voltage ignition cable assemblies Test methods and general requirements |
ISO/TR 9310:1987
|
Road vehicles Smoke measurement of compression-ignition (diesel) engines Survey of short in-service tests |
BS AU 24a:1989
|
Specification for towing connections for trailers up to 5000 kg gross mass |
BS 1916-3:1963
|
Limits and fits for engineering Recommendations for tolerances, limits and fits for large diameters |
ISO 6487:2015
|
Road vehicles — Measurement techniques in impact tests — Instrumentation |
BS AU 114b:1979
|
Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers |
ISO 3871:2000
|
Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid |
BS AU 180-4:1982
|
Brake linings Method for determining effects of heat on dimensions and form of disc brake pads |
BS EN 60095-1 : 93 AMD 11016
|
LEAD-ACID STARTER BATTERIES - PART 1: GENERAL REQUIREMENTS AND METHODS OF TEST |
BS AU 28:1964
|
Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle |
ISO 3732:2003
|
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage |
ISO 3583:1984
|
Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment |
BS AU 182:1982
|
Specification for plastics safety glazing materials for use in road vehicles |
DEFSTAN 25-11/1(1970) : 1970 AMD 4
|
CABLE ASSEMBLY, INTERVEHICLE, ELECTRICAL FOR LIGHTING PURPOSES |
ISO 4030:1983
|
Road vehicles — Vehicle identification number (VIN) — Location and attachment |
ISO 7637-0:1990
|
Road vehicles Electrical disturbance by conduction and coupling Part 0: Definitions and general |
BS AU 183:1983
|
Specification for passive seat belt systems |
ISO 3208:1974
|
Road vehicles — Evaluation of protrusions inside passenger cars |
BS EN 3-2:1996
|
Portable fire extinguishers Tightness, dielectric test, tamping test, special provisions |
ISO 6797:1982
|
Road vehicles Motor vehicles Production conformity requirements for flasher units |
BS AU 215-2:1987
|
Power take offs (PTOs) Specification for dimensions of side openings for commercial road vehicles |
ISO 7419:1991
|
Leisure accommodation vehicles Ventilation requirements |
ISO 10011-2:1991
|
Guidelines for auditing quality systems — Part 2: Qualification criteria for quality systems auditors |
ISO 4040:2009
|
Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles |
BS CP3010(1972) : 1972
|
CODE OF PRACTICE FOR SAFE USE OF CRANES (MOBILE CRANES, TOWER CRANES AND DERRICK CRANES) |