ISO 4413:2010

Current

Current The latest, up-to-date edition.

Hydraulic fluid power General rules and safety requirements for systems and their components

Available format(s): PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English

Published date: 05-11-2010

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 4413:2010 specifies general rules and safety requirements for hydraulic fluid power systems and components used on machinery as defined by ISO 12100. ISO 4413:2010 deals with all significant hazards associated with hydraulic fluid power systems and specifies the principles to apply in order to avoid those hazards when the systems are put to their intended use.

ISO 4413:2010 applies to the design, construction and modification of systems and their components, also taking into account the following aspects: assembly, installation, adjustment, uninterrupted system operation, ease and economy of maintenance and cleaning, reliable operation in all intended uses, energy efficiency and environment.

General Product Information - (Show below) - (Hide below)

Committee	ISO/TC 131/SC 9
Development Note	Supersedes ISO/DIS 4413. Available in CD-ROM format (contains program files). (11/2010)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO 4413:1998

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN ISO 4413 : 2011	Identical
NBN EN ISO 4413 : 2010	Identical
NEN EN ISO 4413 : 2010	Identical
NS EN ISO 4413 : 2010	Identical
I.S. EN ISO 4413:2010	Identical
PN EN ISO 4413 : 2011	Identical
SANS 4413 : 1ED 2013	Identical
SAC GB/T 3766 : 2015	Identical
SN EN ISO 4413 : 2011	Identical
UNI EN ISO 4413 : 2012	Identical
SS-EN ISO 4413:2010	Identical
UNE-EN ISO 4413:2011	Identical
BS EN ISO 4413 : 2010	Identical
EN ISO 4413 : 2010	Identical
DIN EN ISO 4413:2011-04	Identical
NBN E 48 010 : 1987	Identical
DIN ISO 4413:1999-10 (Draft)	Identical
NF ISO 4413 : 1999	Identical
NEN ISO 4413 : 1998	Identical
BIS IS 10481 : 2002	Identical
NFE 48 201 : 1981	Similar to
DIN 24346:1984-12	Corresponds
VDMA 24572 : 2003	Identical
BS ISO 4413 : 1998	Identical
PN ISO 4413 : 2005	Identical
UNI ISO 4413 : 1989	Identical
NS 5908 : 1ED 1986	Identical
BS 4575-1(1979) : 1979	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE-EN 1501-5:2012	Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
I.S. EN 16228-6:2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
BS EN ISO 13856-3:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
14/30265058 DC : 0	BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
14/30270486 DC : 0	BS ISO 18296 - SHIPS AND MARINE TECHNOLOGY - SHIP-SHIFTING WINCHES
13/30265681 DC : 0	BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD
DIN EN 1034-21 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
PREN 12733 : DRAFT 2016	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 1870-19:2013	Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
I.S. EN 1870-18:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
I.S. EN ISO 12100-2:2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
13/30266413 DC : 0	BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
BS ISO 8132:2014	Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
12/30244749 DC : 0	BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN ISO 13856-2:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
ISO 13105-2:2014	Building construction machinery and equipment Machinery for concrete surface floating and finishing Part 2: Safety requirements and verification
BS ISO 16110-1 : 2007	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
BS ISO 20474-1:2017	Earth-moving machinery. Safety General requirements
BS EN ISO 80079-37 : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO 80079-37:2016)
16/30337092 DC	BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
DIN EN 16486 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
DIN EN 16564 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 15954-2:2013	Railway applications. Track. Trailers and associated equipment General safety requirements
12/30253910 DC : DRAFT JULY 2012	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
UNE-EN 16743:2016	Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
ISO 21789:2009	Gas turbine applications — Safety
13/30279579 DC : 0	BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
BS EN 16246 : 2012	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
BS EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
16/30331346 DC : 0	BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
06/30134300 DC : DRAFT MAY 2006	ISO 21628 - AGRICULTURE AND FORESTRY MACHINERY - POWERED MATERIAL COLLECTING SYSTEMS - SAFETY
DIN EN 16564:2015-04	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
14/30278956 DC : 0	BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
BS ISO 10762 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
15/30281554 DC : 0	BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
16/30333286 DC : 0	BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
BS EN 16252 : 2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 15180:2015-01	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
16/30277014 DC : DRAFT MAR 2016	BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 16474:2015 (published 2015-04)	Plastics and rubber machines. Tyre curing machines. Safety requirements
DIN EN ISO 11850:2016-06	Machinery for forestry - General safety requirements (ISO 11850:2011 + Amd 1:2016) (includes Amendment :2016)
11/30232164 DC : 0	BS ISO 12140 - AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
BS EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
06/30151312 DC : DRAFT JUN 2006	BS ISO 22673 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS
BS PD CEN/TR 14489 : 2005	FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
I.S. EN 1459-1:2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN ISO 80079-37:2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
15/30285702 DC : 0	BS EN ISO 16092-3 - MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES
11/30212367 DC : 0	BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
PREN 474-1 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
14/30280597 DC : 0	BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
BS ISO 15217 : 2000	FLUID POWER SYSTEMS AND COMPONENTS - 16 MM SQUARE ELECTRICAL CONNECTOR WITH EARTH CONTACT - CHARACTERISTICS AND REQUIREMENTS
BS EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
13/30276226 DC : 0	BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30243084 DC : 0	BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
ANSI B11.3 : 2012	SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
06/30157092 DC : 0	ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
ISO 16092-1:2017	Machine tools safety — Presses — Part 1: General safety requirements
ISO 9386-2:2000	Power-operated lifting platforms for persons with impaired mobility Rules for safety, dimensions and functional operation Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane
DIN EN 1807-1:2013-06	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 15861:2013-06	Food processing machinery - Smokehouses - Safety and hygiene requirements
ANSI B11.6 : 2001 : R2012	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 1034-16:2012-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 15572 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN ISO 13482:2014-11	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
ISO 16090-1:2017	Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements
UNI EN 15165 : 2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16486:2014-10	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
ISO 18758-2:2018	Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN 1012-3:2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
ANSI FC 1 : 2012	STATIONARY FUEL CELL POWER SYSTEMS
PREN ISO 13856-2 : DRAFT 2011	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011)
PREN 15163 : DRAFT 2014	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 18217:2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 1570-1:2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 1807-2:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 16005 : 2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN ISO 16092-3:2018	MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017)
I.S. EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN ISO 19085-3:2017	WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017)
I.S. EN 15180:2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
ISO 19225:2017	Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems
ISO 1219-2:2012	Fluid power systems and components Graphical symbols and circuit diagrams Part 2: Circuit diagrams
UNI EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
I.S. EN 15861:2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ISO/IEC 80079-38:2016	Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
ISO 17165-1:2007	Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
DIN EN 1459-2 E : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
UNI EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-17:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
ISO 19085-1:2017	Woodworking machines Safety Part 1: Common requirements
UNE-EN ISO 13856-1:2013	Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
17/30354108 DC : 0	BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
17/30362886 DC : 0	BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS
16/30322398 DC : 0	BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
I.S. EN ISO 11850:2011	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011)
BS EN 1459-1:2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
I.S. EN ISO 19085-5:2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
ISO 10896-2:2016	Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
I.S. EN ISO 14118:2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017)
EN 1459-1:2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
NF EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
13/30273889 DC : 0	BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
UNE-EN 16500:2015	Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
UNE-EN ISO 19085-1:2018	Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
16/30314039 DC : 0	BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 1459-2 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
NF ISO 16110-1 : 2009	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
UNE-EN 1459-2:2016	Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
EN ISO 4254-1:2015	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
DIN EN ISO/IEC 80079-38:2012-08 (Draft)	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO 16089:2015	Machine tools Safety Stationary grinding machines
SAE J 1779 : 2013	SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES
EN ISO 16090-1:2018	Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
EN 12013:2018	Plastics and rubber machines - Internal mixers - Safety requirements
ISO 15442:2012	Cranes Safety requirements for loader cranes
DIN EN 609-1:2010-07	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
DIN EN 1034-3:2012-02	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 1552:2003-09	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
DIN EN 13525:2010-05	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 1870-7:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN ISO 13849-2:2013-02	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN 1870-12:2014-03	Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN 1870-9:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13418:2013-08	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 14359 E : 2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN 861:2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN 13524 : 2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
BS PD ISO/TR 10771-2 : 2008	HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 2: RATING METHODS
UNE-EN 1870-4:2012	Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
BS EN 12111 : 2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNE-EN 1870-7:2013	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
11/30235014 DC : 0	BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNE-EN ISO 13849-2:2013	Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS EN 1889-1 : 2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 13418 : 2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
05/30060689 DC : DRAFT JUN 2005	IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
BS EN 14044 : 2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 1870-15 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
BS EN 1870-9 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
14/30278953 DC : 0	BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
IEC 62282-3-1:2007	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 1870-10 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN ISO 10472-1 : 2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
BS EN ISO 4254-1:2015 (published 2015-11)	Agricultural machinery. Safety General requirements
I.S. EN 859:2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
I.S. EN 12463:2014	FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13871:2014	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
EN 13870:2015	Food processing machinery - Portion cutting machines - Safety and hygiene requirements
EN 12463:2014	Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
I.S. EN 14043:2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 13289:2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
EN 13418:2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
EN 1114-1:2011	Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN ISO 23125:2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015, CORRECTED VERSION 2016-03-15)
EN 1501-5:2011	Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 16228-1:2014	Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 13020:2015 (edition 2)	Road surface treatment machines - Safety requirements
EN 16191:2014	Tunnelling machinery - Safety requirements
EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
EN 1501-1:2011+A1:2015	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
DIN EN 982:2009-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
UNI EN 12463 : 2014	FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 12100-2:2004-04	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 13289:2001+A1:2013	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 80079-37:2016	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
DIN EN ISO 80079-37 E : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
I.S. EN 16252:2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
DIN EN 1034-21:2012-11	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 15955-2:2013-09	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN ISO 13856-3 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN ISO 16093:2017	Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
CSA M4254.1 : 2007	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13463-5:2011	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
13/30256922 DC : 0	BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
CSA Z432 : 2016	SAFEGUARDING OF MACHINERY
12/30260942 DC : 0	BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 1672-1 : DRAFT 2012	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 13856-1:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
14/30274816 DC : 0	BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
14/30297842 DC : 0	BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN ISO 16092-1:2018	MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
00/710433 DC : DRAFT JUNE 2000	ISO/CD 15516 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
PREN 1114-3 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
12/30232434 DC : 0	BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
13/30277125 DC : 0	BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
ANSI S2.48 : 1993	SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHODS OF DESCRIBING CHARACTERISTICS
12/30259421 DC : 0	BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN 1807-2:2013-06	Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
UNI EN 16191 : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNI EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
12/30255086 DC : 0	BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNE-EN 16246:2013	Agricultural machinery - Backhoes - Safety
ISO 18296:2014	Ships and marine technology — Ship-shifting winches
BS EN 14033-3 : 2009	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
BS ISO 6020-2 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
BS EN ISO 8230-1:2008 (published 2009-07)	Safety requirements for dry-cleaning machines Common safety requirements
UNE-EN 691-1:2013	Safety of woodworking machines - Part 1: Common requirements
A-A-59412 : A	SWAGING MACHINE, ROTARY, FLOOR-MOUNTED
DIN EN 15949:2012-05	Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
DIN EN ISO 16089 E : 2016	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
16/30335973 DC : 0	BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
15/30295265 DC : 0	BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
12/30259995 DC : 0	BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
17/30359101 DC : 0	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS ISO 1219-2 : 2012	FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
BS ISO 14955-1:2017	MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
11/30244804 DC : 0	BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
12/30270038 DC : 0	BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
BS EN 16191:2014	Tunnelling machinery. Safety requirements
BS EN 16743 : 2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
BS ISO 10896-2:2016	Rough-terrain trucks. Safety requirements and verification Slewing trucks
12/30244743 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
13/30276223 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN ISO 28881 : 2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES
BS ISO 15516 : 2006	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
UNE-EN ISO 13856-2:2013	Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
BS EN 15572 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
PREN 1908 : DRAFT 2013	SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
BS ISO 10972-1 : 1998	CRANES - REQUIREMENTS FOR MECHANISMS - GENERAL
BS ISO 6020-3:2015	Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm
BS EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
PREN 15746-2 : DRAFT 2015	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 15861 E : 2013	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI ISO 5598 : 2012	FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
DIN EN 12977-5:2016-08 (Draft)	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
DIN EN 1570-1:2015-01	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
CSA Z142 : 2010 : R2014	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
ANSI B11.8:2001(R2007)	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
UNI EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
UNI EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
ISO 21873-2:2009	Building construction machinery and equipment Mobile crushers Part 2: Safety requirements
DIN EN ISO 18217 E : 2015	SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
UNI EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT
I.S. EN ISO 3691-2:2016	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS
PREN 1870-6 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1807-1:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN 12999:2011	CRANES - LOADER CRANES
ANSI B11.0 : 2015	SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
I.S. EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
I.S. EN 1672-1:2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 15163:2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
UNI EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
I.S. EN 12453:2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 15955-2:2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ANSI B11.2 : 2013	SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES
BS EN 13135 : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
DIN EN 15467:2015-03	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 8133:2014	Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
ISO 1219-3:2016	Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
ISO 15217:2000	Fluid power systems and components 16 mm square electrical connector with earth contact Characteristics and requirements
EN 12042 : 2014 COR 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12042:2014-07	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 10972-3:2003	Cranes Requirements for mechanisms Part 3: Tower cranes
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN ISO 14118:2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
UNE-EN 15861:2013	Food processing machinery - Smokehouses - Safety and hygiene requirements
UNI EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
16/30341165 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12999:2013-02	CRANES - LOADER CRANES
EN ISO 14118:2018	Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)
EN 12999:2011+A2:2018	CRANES - LOADER CRANES
EN ISO 16092-3 : 2018	MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017)
UNI EN 1034-27 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
PREN 289 : DRAFT 2012	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
EN 12453 : 2017 COR 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 14033-3:2017	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
ISO 20966:2007	Automatic milking installations Requirements and testing
ISO 10771-1:2015	Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method
DIN EN 12463:2015-02	Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
DIN EN 1870-10:2013-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN ISO 4254-1:2016-09	Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
DIN EN 1417:2015-03	PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 1870-8:2013-03	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 12001:2012-11	CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 536:2016-01	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 14359:2011-04	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
UNE-EN 289:2014	Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
UNE-EN 1034-3:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
BS EN 1870-7 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1: Common requirements
BS EN 940 : 2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNE-EN 1870-10:2013	Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN ISO 11111-1 : 2016	TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
UNE-EN 1908:2015	Safety requirements of cableway installations designed to carry persons - Tensioning devices
EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
BS EN ISO 13849-2:2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNE-EN 13020:2016	Road surface treatment machines - Safety requirements
UNE-EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
UNE-EN 609-1:2017	Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters
I.S. EN 1870-11:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 13524:2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
DIN EN 1915-1:2001-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 1870-8:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 13849-2:2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN ISO 3691-2:2017-02	Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2016) (includes Corrigendum :2016)
I.S. EN 289:2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 415-6:2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 1870-10:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1908:2015-11	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
I.S. EN 1808:2015	SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN 13524:2003-10	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
I.S. EN 1870-12:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
ONORM EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
ONORM EN 12042 : JUN 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 13524:2003+A2:2014	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
I.S. EN 1870-9:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13463-5:2011-10	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
EN 16564:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 13852-1:2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
DIN EN 13463-5:2004-03	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
I.S. EN 1915-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 1846-3:2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
I.S. EN 12111:2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 1908:2015	SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
I.S. EN 13418:2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
I.S. EN 1114-1:2011	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
ONORM EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN ISO 10472-1:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
I.S. EN ISO 11111-1:2016	TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
I.S. EN 1870-15:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1889-1:2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
I.S. EN ISO 13849-1:2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 609-1:2017	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
DIN EN 13289:2013-05	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN 15571:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
I.S. EN 13870:2015	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 940:2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
I.S. EN 14044:2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 1417:2014	PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN ISO 4254-1:2015	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
I.S. EN 536:2015	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1870-7:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 12001:2012	CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
I.S. EN 1501-1:2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
I.S. EN ISO 13850:2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)