ISO 5221:1984
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
26-02-2019
Language(s)
English, French
Published date
01-01-1984
Gives different methods of measuring air flow rate in an air handling duct which, without the need of calibration, meet various specific requirements in the field of air distribution and air diffusion. For the purpose of this standard an "air handling duct" is defined as a tight section of ductwork which cross-section may be circular or, excluding for Pitot-static tubes, rectangular.
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NFX 10 231 : 1984 FD | Similar to |
| PN ISO 5221 : 1994 | Identical |
| DIN EN ISO 5802:2016-02 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001 + AMD 1:2015) |
| 09/30206346 DC : 0 | BS EN 14511-3 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| DD ENV 1397:1996 | Heat exchangers. Hydronic room fan coil units. Test procedure for establishing the performance |
| ISO 6944-1:2008 | Fire containment — Elements of building construction — Part 1: Ventilation ducts |
| 05/30136094 DC : DRAFT JULY 2005 | ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS EN 16211:2015 | Ventilation for buildings. Measurement of air flows on site. Methods |
| 07/30173025 DC : 0 | BS EN 15116 - VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| CSA C13256.1:2001 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| CSA C748 : 2013 | PERFORMANCE OF DIRECT-EXPANSION (DX) GROUND-SOURCE HEAT PUMPS |
| PREN 1366-2 : DRAFT 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| UNI EN 1507 : 2008 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS WITH RECTANGULAR SECTION - REQUIREMENTS FOR STRENGTH AND LEAKAGE |
| NF EN 1366-9 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| UNE-EN ISO 5801:2010 | Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| BS EN 13181:2001 | Ventilation for buildings. Terminals. Performance testing of louvres. Performance testing of louvres subject to simulated sand |
| BS EN 1507:2006 | Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage |
| BS EN 13030:2001 | Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain |
| EN 12589:2001 | Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 12239:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications |
| EN 13181:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| 01/562316 DC : DRAFT JULY 2001 | BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| ISO 10294-1:1996 | Fire resistance tests Fire dampers for air distribution systems Part 1: Test method |
| PD CR 14378:2002 | Ventilation for buildings. Experimental determination of mechanical energy loss coefficients of air handling components |
| UNE-EN 15882-1:2013 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| 11/30233217 DC : 0 | BS EN 1751 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| 17/30352210 DC : 0 | BS ISO 21925-1 - FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: MECHANICAL DAMPERS |
| 14/30301149 DC : 0 | BS EN 1366-2 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| 98/719326 DC : DRAFT DEC 1998 | ISO/CD 15042 - MULTI-SPLIT SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| DIN EN 1366-9:2008-08 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| 01/714475 DC : DRAFT NOV 2001 | BS EN 14277 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN ATD/PLENUM BOXES |
| 10/30216081 DC : 0 | BS ISO 17553 - ROOM FAN-COIL UNITS - TESTING AND RATING FOR PERFORMANCE |
| 17/30332533 DC : 0 | BS EN 13141-1 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 1: EXTERNALLY AND INTERNALLY MOUNTED AIR TRANSFER DEVICES |
| AHRI 1230 : 2010 ADD 2 2014 | PERFORMANCE RATING OF VARIABLE REFRIGERANT FLOW (VRF) MULTI-SPLIT AIR-CONDITIONING AND HEAT PUMP EQUIPMENT |
| 08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| 04/30026990 DC : 0 | BS EN 12101-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE DAMPERS |
| CSA C13256.1 : 2001 : R2016 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| BS EN 15882-1 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| BS EN ISO 5802 : 2008 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU |
| EN 15882-1:2011+A1:2017 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| UNI EN 1366-9 : 2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| S.R. CEN/TR 12101-4:2009 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| I.S. EN 13053:2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| NF EN 13053 : 2006 + A1 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| DIN EN 1366-2:2015-09 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| BS EN 12589:2001 | Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| DIN EN 13053:2012-02 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| I.S. EN 1366-2:2015 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| BS 848-1:1997 | Fans for general purposes Performance testing using standardized airways |
| BS 848-1(2007) : 2007 COR 2010 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
| UNE-EN 16211:2016 | Ventilation for buildings - Measurement of air flows on site - Methods |
| I.S. EN 306:1997 | HEAT EXCHANGERS - METHODS OF MEASURING THE PARAMETERS NECESSARY FOR ESTABLISHING THE PERFORMANCE |
| 04/30026984 DC : 0 | BS EN 12101-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS |
| UNI EN 14277 : 2008 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN OR CLOSE TO ATD/PLENUM BOXES |
| 03/316891 DC : DRAFT OCT 2003 | EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| 00/541451 DC : DRAFT OCT 2000 | BS EN 12101-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: FIRE AND SMOKE CONTROL INSTALLATIONS - KITS |
| 04/30124512 DC : 0 | EN 1366-9 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| 07/30162717 DC : 0 | BS EN 15080-10 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 10: FIRE RESISTING DUCTS |
| BS 848-3(2001) : 2001 | FANS FOR GENERAL PURPOSE - PART 3: PERFORMANCE TESTING IN SITU |
| ASHRAE 70 : 2006 | METHOD OF TESTING THE PERFORMANCE OF AIR OUTLETS AND AIR INLETS |
| PREN 1751 : DRAFT 2011 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
| DIN EN 14175-4:2004-12 | Fume cupboards - Part 4: On-site test methods; German version EN 14175-4:2004 |
| BS EN 306:1997 | Heat exchangers. Methods of measuring the parameters necessary for establishing the performance |
| ISO 5802:2001 | Industrial fans — Performance testing in situ |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| BS EN 13053 : 2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| BS EN 14175-4:2004 | Fume cupboards On-site test methods |
| EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| UNI EN 1366-8 : 2005 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 8: SMOKE EXTRACTION DUCTS |
| UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| 04/30124515 DC : 0 | EN 1366-10 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| 12/30255590 DC : 0 | BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
| CEN/TR 12101-4:2009 | Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
| DIN EN 15116:2008-07 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| 05/30136105 DC : DRAFT JULY 2005 | ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| 15/30326260 DC : 0 | BS EN 16905-4 - GAS-FIRED ENDOTHERMIC ENGINE HEAT PUMPS - PART 4: TEST METHODS |
| BS EN 15116:2008 | Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams |
| 05/30141855 DC : DRAFT NOV 2005 | ISO 6944-1 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - PART 1: VENTILATION DUCTS |
| 12/30255198 DC : 0 | BS ISO 16494 - HEAT RECOVERY VENTILATORS AND ENERGY RECOVERY VENTILATORS - METHOD OF TEST FOR PERFORMANCE |
| DIN EN 16211:2015-09 | Ventilation for buildings - Measurement of air flows on site - Methods |
| 08/30176919 DC : DRAFT SEP 2008 | BS EN 1366-1 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| ISO 21927-3:2006 | Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
| I.S. EN 1366-9:2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| I.S. EN 16211:2015 | VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| BS ISO 5801 : 2007 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
| ASHRAE 70 : 2006 : R2011 | METHOD OF TESTING THE PERFORMANCE OF AIR OUTLETS AND AIR INLETS |
| I.S. CR 14378:2002 | VENTILATION FOR BUILDINGS - EXPERIMENTAL DETERMINATION OF MECHANICAL ENERGY LOSS COEFFICIENTS OF AIR HANDLING COMPONENTS |
| BS ISO 10294-1 : 1996 | FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD |
| PREN 13141-1 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 1: EXTERNALLY AND INTERNALLY MOUNTED AIR TRANSFER DEVICES |
| NF EN 13141-1 : 2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 1: EXTERNALLY AND INTERNALLY MOUNTED AIR TRANSFER DEVICES |
| DIN EN 13141-1:2004-05 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 1: EXTERNALLY AND INTERNALLY MOUNTED AIR TRANSFER DEVICES |
| CR 14378:2002/AC:2002 | VENTILATION FOR BUILDINGS - EXPERIMENTAL DETERMINATION OF MECHANICAL ENERGY LOSS COEFFICIENTS OF AIR HANDLING COMPONENTS |
| I.S. CEN TR 12101-4:2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| DIN EN 1366-8:2004-10 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004 |
| UNI EN 13053 : 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| BS EN 1366-8:2004 | Fire resistance tests for service installations Smoke extraction ducts |
| BS EN 14277:2006 | Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| BS EN ISO 11820:1997 | Acoustics. Measurements on silencers in situ |
| UNE-EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| EN 16211:2015 | Ventilation for buildings - Measurement of air flows on site - Methods |
| EN 14277:2006 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| EN 1366-8:2004 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
| EN 15116:2008 | Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams |
| EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN ISO 5802:2008/A1:2015 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001/AMD 1:2015) |
| EN 306:1997 | Heat exchangers - Methods of measuring the parameters necessary for establishing the performance |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN 14175-4:2004 | Fume cupboards - Part 4: On-site test methods |
| ENV 1397 : 1994 | HEAT EXCHANGERS - HYDRONIC ROOM FAN COIL UNITS - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
| EN 25136 : 1993 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD |
| EN ISO 11820 : 1996 | ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU |
| 12/30271673 DC : 0 | BS EN 14511-3 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 3: TEST METHODS |
| 10/30240340 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| 16/30331280 DC (published 2016-04) | BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
| BS ISO 10294-3:1999 | Fire-resistance tests. Fire dampers for air distribution systems Guidance on the test method |
| DD ENV 1216:1994 | Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance |
| BS ISO 21927-3 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| UNI EN 15116 : 2008 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| 14/30289271 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| BS EN 1366-9:2008 | Fire resistance tests for service installations Single compartment smoke extraction ducts |
| ANSI/AHRI/ASHRAE ISO 13256-1 : 1998 : R2012 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| ANSI/AHRI/ASHRAE ISO 13256-1:1998 | WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
| 05/30136071 DC : DRAFT JULY 2005 | ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
| BS EN 13141-1:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Externally and internally mounted air transfer devices |
| FD CR 14378 : 2004 FD | VENTILATION FOR BUILDINGS - EXPERIMENTAL DETERMINATION OF MECHANICAL ENERGY LOSS COEFFICIENTS OF AIR HANDLING COMPONENTS |
| I.S. EN 15882-1:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| I.S. EN 13141-1:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 1: EXTERNALLY AND INTERNALLY MOUNTED AIR TRANSFER DEVICES |
| EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| I.S. EN ISO 5802:2008 | INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001) |
| I.S. EN 15116:2008 | VENTILATION IN BUILDINGS - CHILLED BEAMS - TESTING AND RATING OF ACTIVE CHILLED BEAMS |
| BS EN 12239:2001 | Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications |
| BS EN 1366-2:2015 | Fire resistance tests for service installations Fire dampers |
| UNE-EN 13053:2007 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| BS EN 25136:1994 | Acoustics. Determination of sound power radiated into a duct by fans. In-duct method |
| DIN EN 14277:2006-11 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| ISO 5167:1980 | Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.