ISO 7240-16:2007
Current
The latest, up-to-date edition.
Fire detection and alarm systems — Part 16: Sound system control and indicating equipment
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
25-06-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 7240-16:2007 specifies the requirements, test methods and performance criteria for sound system control and indicating equipment (s.s.c.i.e.) for use in buildings and structures as part of a sound system for emergency purposes (s.s.e.p.) aas defined in ISO 7240-1. The s.s.c.i.e. is primarily intended to broadcast information for the protection of lives within one or more specified areas in an emergency, to effect a rapid and orderly mobilization of occupants in an indoor or outdoor area. This includes systems using loudspeakers to broadcast voice announcements for emergency purposes, alert signals complying with ISO 7731, and evacuate signals complying with ISO 8201.
The overall requirements of an s.s.e.p., especially concerning audibility and intelligibility, are contained within ISO 7240-19. In addition to ensuring compliance with ISO 7240-16:2007, the manufacturer should also consider the requirements of ISO 7240-19, national regulations, codes and standards that affect the s.s.c.i.e. design and usability. For example, some regulations require certain optional functions to be available on all s.s.c.i.e. installed within the jurisdiction.
The use of the equipment for normal sound reinforcement and distribution systems purposes under non-hazardous circumstances is not excluded.
ISO 7240-16:2007 can also be used for the assessment of similar control and indicating equipment for use in systems where the warning-signal broadcast does not include a voice message.
ISO 7240-16:2007 does not apply to systems using only sounders or bells.
| Committee |
ISO/TC 21/SC 3
|
| DevelopmentNote |
Supersedes ISO/DIS 7240-16. (06/2007) Supersedes IEC 60849. (02/2008)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| 10/30191968 DC : 0 | BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| BS ISO 19029:2016 | Accessible design. Auditory guiding signals in public facilities |
| BS EN ISO 28803:2012 | Ergonomics of the physical environment. Application of international standards to people with special requirements |
| UNI ISO 7240-19 : 2010 | FIRE DETECTION AND ALARM SYSTEMS - PART 19: DESIGN, INSTALLATION, COMMISSIONING AND SERVICE OF SOUND SYSTEMS FOR EMERGENCY PURPOSES |
| ISO 7240-19:2007 | Fire detection and alarm systems — Part 19: Design, installation, commissioning and service of sound systems for emergency purposes |
| 11/30176548 DC : 0 | BS 7827 - CODE OF PRACTICE FOR DESIGNING, SPECIFYING, MAINTAINING AND OPERATING EMERGENCY SOUND SYSTEMS AT SPORTS VENUES |
| 12/30249483 DC | BS ISO 7240-14. Fire detection and alarm systems. Part 14. Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings |
| ISO 19029:2016 | Accessible design Auditory guiding signals in public facilities |
| BS 7827:2011 | Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues |
| BS EN ISO 24504:2016 | Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems |
| I.S. EN ISO 28803:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012) |
| 15/30301932 DC : 0 | BS ISO 19029 - ACCESSIBLE DESIGN - AUDITORY GUIDING SIGNALS IN PUBLIC FACILITIES |
| DIN EN ISO 28803:2012-06 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| 12/30234183 DC : 0 | BS ISO 24504 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS |
| ISO 7240-4:2017 | Fire detection and alarm systems — Part 4: Power supply equipment |
| ISO 28803:2012 | Ergonomics of the physical environment — Application of International Standards to people with special requirements |
| ISO 24504:2014 | Ergonomics Accessible design Sound pressure levels of spoken announcements for products and public address systems |
| EN ISO 24504:2016 | Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) |
| EN ISO 28803:2012 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| UNI EN ISO 28803 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| I.S. EN ISO 24504:2016 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS (ISO 24504:2014) |
| ISO/TS 7240-9:2012 | Fire detection and alarm systems Part 9: Test fires for fire detectors |
| ISO 7240-10:2012 | Fire detection and alarm systems — Part 10: Point-type flame detectors |
| ISO 7240-15:2014 | Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO/TR 7240-14:2003 | Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings |
| ISO 7240-4:2003 | Fire detection and alarm systems Part 4: Power supply equipment |
| ISO 7240-12:2014 | Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| ISO 7240-2:2003 | Fire detection and alarm systems Part 2: Control and indicating equipment |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 7240-6:2011 | Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells |
| ISO 7240-11:2011 | Fire detection and alarm systems Part 11: Manual call points |
| IEC 60268-1:1985 | Sound system equipment. Part 1: General |
| ISO 7240-21:2005 | Fire detection and alarm systems — Part 21: Routing equipment |
| ISO 7240-13:2005 | Fire detection and alarm systems Part 13: Compatibility assessment of system components |
| ISO 7240-5:2012 | Fire detection and alarm systems Part 5: Point-type heat detectors |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| ISO 7240-19:2007 | Fire detection and alarm systems — Part 19: Design, installation, commissioning and service of sound systems for emergency purposes |
| ISO 7240-8:2014 | Fire detection and alarm systems Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor |
| ISO 8201:1987 | Acoustics Audible emergency evacuation signal |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| ISO 7240-1:2014 | Fire detection and alarm systems — Part 1: General and definitions |
| ISO 7240-7:2011 | Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization |
| ISO 7240-22:2017 | Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts |
| IEC 60268-4:2014 | Sound system equipment - Part 4: Microphones |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.