ISO 8092-2:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-09-2023
English, French
18-11-2005
ISO 8092:2005 defines terms and specifies test methods and general performance requirements for single-pole and multi-pole connections used with on-board electrical wiring harnesses of road vehicles.
It is applicable to connectors designed to be disconnected after mounting in the vehicle for repair and maintenance only. It does not cover one-part connections, i.e. where one part of the connection has direct contact to the pattern of the printed circuit board.
ISO 8092:2005 is not applicable to internal connections of electronic devices.
Committee |
ISO/TC 22/SC 32
|
DevelopmentNote |
Supersedes ISO/DIS 8092-2 (11/2005)
|
DocumentType |
Standard
|
Pages |
29
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
NF EN ISO 8092-2 : 2006 | Identical |
NBN EN ISO 8092-2 : 2006 | Identical |
NEN EN ISO 8092-2 : 2006 | Identical |
NS EN ISO 8092-2 : 3ED 2006 | Identical |
PN EN ISO 8092-2 : 2008 | Identical |
SN EN ISO 8092-2 : 2006 | Identical |
BS EN ISO 8092-2:2005 | Identical |
EN ISO 8092-2:2005 | Identical |
DIN EN ISO 8092-2:2006-10 | Identical |
UNE 26241-4:1988 | Identical |
I.S. EN ISO 8092-2:2006 | Identical |
UNE-EN ISO 8092-2:2007 | Identical |
I.S. EN 28092-2:1992 | Identical |
UNE-EN ISO 8092-2:2005 | Identical |
UNI EN ISO 8092-2 : 2006 | Identical |
I.S. EN ISO 4165:2003 | ROAD VEHICLES - ELECTRICAL CONNECTIONS - DOUBLE-POLE CONNECTION |
00/713956 DC : DRAFT SEP 2000 | ISO/DIS 15031-3 - ROAD VEHICLES - COMMUNICATIONS BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 3: DIAGNOSTIC CONNECTOR AND RELATED ELECTRICAL CIRCUIT - SPECIFICATIONS AND USE |
12/30265053 DC : 0 | BS ISO 19072-2 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO-WAY AND THREE-WAY CONNECTIONS - PART 2: TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
I.S. EN ISO 8092-1:1998 | ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 1: TABS FOR SINGLE-POLE CONNECTIONS - DIMENSIONS AND SPECIFIC REQUIREMENTS (ISO 8092-1:1996) |
BS ISO 22902-7:2006 | Road vehicles. Automotive multimedia interface Physical specification |
BS ISO 7588-3:1998 | Road vehicles. Electrical/electronic switching devices Microrelays |
PD ISO/TS 19072-3:2012 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Pyrotechnic device and harness connector assembly. type 1 |
10/30211397 DC : 0 | BS ISO 16844-1 - ROAD VEHICLES - TACHOGRAPH SYSTEMS - PART 1: ELECTRICAL CONNECTOR |
05/30132844 DC : DRAFT APR 2005 | EN 15207 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS |
00/708469 DC : DRAFT APR 2000 | ISO/DIS 16844-1 - ROAD VEHICLES - TACHOGRAPH SYSTEMS - PART 1: ELECTRICAL CONNECTORS |
ISO/TS 19072-3:2012 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 3: Pyrotechnic device and harness connector assembly - type 1 |
ISO 19072-2:2013 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 2: Test methods and general performance requirements |
DD ISO/TS 19072-3:2008 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Pyrotechnic device and harness connector assembly. Type 1 |
BS ISO 17612:2004 | Tractors and machinery for agriculture and forestry. Auxiliary-power-transmission connector for the operator station |
BS ISO 7588-2:1998 | Road vehicles. Electrical/electronic switching devices Electronic devices |
ISO 7588-1:1998 | Road vehicles Electrical/electronic switching devices Part 1: Relays and flashers |
ISO 16844-1:2013 | Road vehicles Tachograph systems Part 1: Electrical connectors |
BS ISO 19072-1:2014 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Pocket interface definition |
NFR 13 459 : 1998 | ROAD VEHICLES - CONNECTION INTERFACE FOR ON-BOARD SEALED AND UNSEALED CONNECTORS - GENERAL |
BS EN ISO 8092-4:1999 | Road vehicles. Connections for on-board electrical wiring harnesses Pins for single- and multi-pole connections. Dimensions and specific requirements |
I.S. EN 15207:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
ISO 19072-1:2014 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 1: Pocket interface definition |
13/30265050 DC : 0 | BS ISO 19072-1 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO-WAY AND THREE-WAY CONNECTIONS - PART 1: POCKET INTERFACE DEFINITION |
BS ISO 16844-1:2013 | Road vehicles. Tachograph systems Electrical connectors |
01/711545 DC : DRAFT AUG 2001 | ISO 17612 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - OPERATOR-STATION, AUXILIARY-POWER-TRANSMISSION CONNECTOR |
ISO/TS 19072-4:2012 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 4: Pyrotechnic device and harness connector assembly - type 2 |
PD ISO/TS 19072-4:2012 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Pyrotechnic device and harness connector assembly. type 2 |
15/30300864 DC : 0 | BS ISO 19689 - MOTORCYCLES AND MOPEDS - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR DIAGNOSTICS - DIAGNOSTIC CONNECTOR AND RELATED ELECTRICAL CIRCUITS, SPECIFICATION AND USE |
ISO 19689:2016 | Motorcycles and mopeds Communication between vehicle and external equipment for diagnostics Diagnostic connector and related electrical circuits, specification and use |
18/30320017 DC : 0 | BS ISO 11992-1 - ROAD VEHICLES - INTERCHANGE OF DIGITAL INFORMATION ON ELECTRICAL CONNECTIONS BETWEEN TOWING AND TOWED VEHICLES - PART 1: PHYSICAL AND DATA-LINK LAYERS |
BS ISO 19072-2:2013 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Test methods and general performance requirements |
ISO 22902-7:2006 | Road vehicles Automotive multimedia interface Part 7: Physical specification |
SAE J 1962 : 2016 | DIAGNOSTIC CONNECTOR |
ISO 17612:2004 | Tractors and machinery for agriculture and forestry Auxiliary-power-transmission connector for the operator station |
ISO 15170-2:2001 | Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements |
UNI EN 15207 : 2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
06/30127899 DC : DRAFT MAR 2006 | ISO 19072-1 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO AND THREE WAY CONNECTIONS - PART 1: POCKET INTERFACE DEFINITION |
ISO 7588-2:1998 | Road vehicles Electrical/electronic switching devices Part 2: Electronic devices |
ISO 7588-3:1998 | Road vehicles Electrical/electronic switching devices Part 3: Microrelays |
BS ISO 7588-1:1998 | Road vehicles. Electrical/electronic switching devices Relays and flashers |
BS ISO 19689:2016 | Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use |
06/30137905 DC : DRAFT MAR 2006 | ISO 19072-2 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO WAY AND THREE WAY CONNECTIONS - PART 2: TEST METHODS AND GENERAL PERFORMANCES REQUIREMENTS |
I.S. EN 28092-1:1992 | ROAD VEHICLES - FLAT, QUICK-CONNECT TERMINATIONS - PART 1: TABS FOR SINGLE POLE CONNECTIONS |
PREN 15207 : DRAFT 2012 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
ISO 11992-1:2003 | Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layers |
BS EN ISO 8092-3:1999 | Road vehicles. Connections for on-board electrical wiring harnesses Tabs for multi-pole connections. Dimensions and specific requirements |
BS EN 15207:2014 | Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
BS EN ISO 8092-1:1998 | Road vehicles. Connections for on-board electrical wiring harnesses Tabs for single-pole connections. Dimensions and specific requirements |
ISO 8092-4:1997 | Road vehicles Connections for on-board electrical wiring harnesses Part 4: Pins for single- and multi-pole connections Dimensions and specific requirements |
ISO 4165:2001 | Road vehicles — Electrical connections — Double-pole connection |
ISO 8092-1:1996 | Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements |
BS EN ISO 4165:2003 | Road vehicles. Electrical connections. Double-pole connection |
ISO 8092-3:1996 | Road vehicles Connections for on-board electrical wiring harnesses Part 3: Tabs for multi-pole connections Dimensions and specific requirements |
DIN EN 15207:2015-03 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
EN ISO 8092-4:1999 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997) |
EN ISO 4165:2003 | Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
EN ISO 8092-1:1998 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
EN ISO 8092-3:1999 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
EN 15207:2014 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
EN 28092-1 : 1991 | ROAD VEHICLES - FLAT, QUICK-CONNECT TERMINATIONS - PART 1: TABS FOR SINGLE POLE CONNECTIONS |
12/30261231 DC : 0 | BS EN 15207 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
UNE-EN 15207:2015 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
DIN EN ISO 4165:2004-05 | Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
IEC 60512-11-14:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test |
ISO 20653:2013 | Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access |
ISO 6722:2006 | Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements |
IEC 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
SAE J 311 : 2000 | FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |
ISO 7309:1985 | Road vehicles Hydraulic braking systems ISO reference petroleum base fluid |
IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.