ISO 8143:2010
Current
The latest, up-to-date edition.
Thermal insulation products for building equipment and industrial installations Calcium silicate products
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
23-02-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 8143:2010 specifies the requirements for factory-made calcium silicate products which are used for thermal insulation of industrial installations and building equipment with an operating temperature of up to approximately +1 100 C.
NOTE Calcium silicate products can be used at temperatures lower than 0 C. For operating temperatures below 0 C, special tests, regarding the suitability of the product in the intended application, are advised (e.g. liquefaction of oxygen). It is advisable to seek the advice of the manufacturer(s) in all cases.
The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware.
ISO 8143:2010 describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by ISO 8143:2010 are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered.
| DevelopmentNote |
Supersedes ISO/DIS 8143. (02/2010)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| SAC GB/T 10699 : 1998 | Identical |
| NEN ISO 8143 : 2010 | Identical |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity |
| EN 13468:2001 | Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH |
| EN 993-9:1997 | Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression |
| ISO 2477:2005 | Shaped insulating refractory products — Determination of permanent change in dimensions on heating |
| EN 13471:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 993-4:1995 | Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases |
| ISO 29768:2008 | Thermal insulating products for building applications — Determination of linear dimensions of test specimens |
| ISO 12576-1:2001 | Thermal insulation — Insulating materials and products for buildings — Conformity control systems — Part 1: Factory-made products |
| EN 13469:2012 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
| ISO 29472:2008 | Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions |
| ISO 29767:2008 | Thermal insulating products for building applications Determination of short-term water absorption by partial immersion |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| ISO 8497:1994 | Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
| EN 13470:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| ISO 8894-1:2010 | Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer) |
| ISO 29469:2008 | Thermal insulating products for building applications — Determination of compression behaviour |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| EN 13472:2012 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
| ISO 29468:2008 | Thermal insulating products for building applications — Determination of flatness |
| ISO 29467:2008 | Thermal insulating products for building applications — Determination of squareness |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 29465:2008 | Thermal insulating products for building applications — Determination of length and width |
| ISO 12570:2000 | Hygrothermal performance of building materials and products — Determination of moisture content by drying at elevated temperature |
| EN 993-1:1995 | Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity |
| ISO 29466:2008 | Thermal insulating products for building applications — Determination of thickness |
| ISO 29771:2008 | Thermal insulating materials for building applications — Determination of organic content |
| ISO 21129:2007 | Hygrothermal performance of building materials and products — Determination of water-vapour transmission properties — Box method |
| ISO 29470:2008 | Thermal insulating products for building applications Determination of the apparent density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.