Skip to content
Please enter a keyword to search

  • ISO/IEC 14165-115:2006

    Current The latest, up-to-date edition.

    Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  02-03-2006

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Fibre Channel provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), ANSI/IEEE 802.2 and others.

    This International Standard describes the physical interface portions of a high performance serial link that supports the higher Upper Level Protocols (ULPs) associated with HIPPI, IPI, SCSI, IP and others.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO/IEC 14165-133:2010 Information technology Fibre Channel Part 133: Switch Fabric-3 (FC-SW-3)
    CSA ISO/IEC 14165-222:2006(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 222: SINGLE-BYTE COMMAND SETS-2 MAPPING PROTOCOL (FC-SB-2)
    CSA ISO/IEC 14165-241:2006(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 241: BACKBONE 2 (FC-BB-2)
    CSA ISO/IEC 14776-412 : 2007 : R2012 INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 412: ARCHITECTURE MODEL-2 (SAM-2)
    ISO/IEC TR 14165-312:2009 Information technology Fibre Channel Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
    ISO/IEC TR 14165-313:2013 Information technology Fibre Channel Part 313: Avionics Environment Anonymous Synchronous Messaging (FC-AE-ASM)
    CSA ISO/IEC 14165-222 :2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 222: SINGLE-BYTE COMMAND SETS-2 MAPPING PROTOCOL (FC-SB-2)
    BS EN 60793-2-10:2017 Optical fibres Product specifications. Sectional specification for category A1 multimode fibres
    CAN/CSA-ISO/IEC TR 14165-117-08 (R2018) Information technology - Fibre channel - Part 117: Methodologies for jitter and signal quality (MJSQ) (Adopted ISO/IEC TR 14165-117:2007, edition 1.0, 2007-09)
    ISO/IEC 14776-413:2007 Information technology Small Computer System Interface (SCSI) Part 413: SCSI Architecture Model -3 (SAM-3)
    17/30345069 DC : 0 BS EN 60793-2-10 - OPTICAL FIBRES - PART 2-10: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A1 MULTIMODE FIBRES
    ISO/IEC 14165-114:2005 Information technology Fibre Channel Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
    ISO/IEC TR 14165-372:2011 Information technology Fibre Channel Part 372: Methodologies of interconnects-2 (FC-MI-2)
    CSA ISO/IEC 14165-114: 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 114: 100 MB/S BALANCED COPPER PHYSICAL INTERFACE (FC-100-DF-EL-S)
    CSA ISO/IEC 14165-241 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 241: BACKBONE 2 (FC-BB-2)
    ANSI INCITS 428 : 2007 STORAGE MANAGEMENT HOST BUS ADAPTER APPLICATION PROGRAMMING INTERFACE (SM-HBA)
    IEC 60793-2-10:2017 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
    CSA ISO/IEC 14165-116 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
    CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
    CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 : R2016 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
    ISO/IEC 14165-222:2005 Information technology Fibre Channel Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)
    I.S. EN 60793-2-10:2017 OPTICAL FIBRES - PART 2-10: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A1 MULTIMODE FIBRE
    CAN/CSA-ISO/IEC 14165-114:2006(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 114: 100 MB/S BALANCED COPPER PHYSICAL INTERFACE (FC-100-DF-EL-S)
    ISO/IEC 14165-241:2005 Information technology Fibre Channel Part 241: Backbone 2 (FC-BB-2)
    CSA ISO/IEC TR 14165-117 : 2008 : R2013 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 117: METHODOLOGIES FOR JITTER AND SIGNAL QUALITY (MJSQ)
    CSA ISO/IEC 14776-413 : 2007 : R2012 INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 413: ARCHITECTURE MODEL-3 (SAM-3)
    CAN/CSA-ISO/IEC 14776-412-07 (R2017) Information Technology - Small Computer System Interface (SCSI) - Part 412: Architecture Model-2 (SAM-2) (Adopted ISO/IEC 14776-412:2006, first edition, 2006-10)
    EN 60793-2-10:2017 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
    CSA ISO/IEC 14776-412:2007 INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 412: ARCHITECTURE MODEL-2 (SAM-2)
    CAN/CSA-ISO/IEC 14776-413-07 (R2017) Information Technology - Small Computer System Interface (SCSI) - Part 413: Architecture Model-3 (SAM-3) (Adopted ISO/IEC 14776-413:2007, first edition, 2007-02)
    CSA ISO/IEC 14776-413 : 2007 INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 413: ARCHITECTURE MODEL-3 (SAM-3)
    ISO/IEC TR 14165-117:2007 Information technology Fibre Channel Part 117: Methodologies for jitter and signal quality (MJSQ)
    ISO/IEC 14165-116:2005 Information technology Fibre Channel Part 116: 10 Gigabit (10GFC)

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
    ISO/IEC 14165-116:2005 Information technology Fibre Channel Part 116: 10 Gigabit (10GFC)
    IEC 61754-18:2001 Fibre optic connector interfaces - Part 18: Type MT-RJ connector family
    IEC 60807-3:1990 Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction
    IEC 61280-1-3:2010 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement
    ISO/IEC 14165-141:2001 Information technology Fibre Channel Part 141: Fabric Generic Requirements (FC-FG)
    IEC 60793-2-10:2017 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
    IEC 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
    IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
    IEC 61300-2-25:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures
    IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
    ISO/IEC 14165-133:2010 Information technology Fibre Channel Part 133: Switch Fabric-3 (FC-SW-3)
    IEC 61300-3-3:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss
    ISO/IEC 14165-222:2005 Information technology Fibre Channel Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)
    ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEC 61300-2-17:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    IEC 60793-1-42:2013 Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
    IEC 61300-2-5:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    ISO/IEC 14165-241:2005 Information technology Fibre Channel Part 241: Backbone 2 (FC-BB-2)
    ISO/IEC 14165-122:2005 Information technology Fibre Channel Part 122: Arbitrated Loop-2 (FC-AL-2)
    ISO/IEC 14165-414:2007 Information technology Fibre Channel Part 414: Generic Services 4 (FC-GS-4)
    ISO/IEC 14165-321:2009 Information technology Fibre Channel Part 321: Audio-Video (FC-AV)
    IEC 61280-1-1:2013 Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
    ISO/IEC 14165-131:2000 Information technology Fibre Channel Part 131: Switch Fabric Requirements (FC-SW)
    IEC 60793-1-40:2001 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
    IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
    IEC 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
    ISO/IEC 14165-211:1999 Information technology Fibre Channel Part 211: Mapping to HIPPI-FP (FC-FP)
    IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
    IEC 61300-3-4:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    IEC 60169-8:1978 Radio-frequency connectors. Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock - Characteristic impedance 50 ohms (Type BNC)
    IEC 60793-2-50:2015 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
    IEC 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
    IEC 61300-2-4:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
    ISO/IEC TR 14165-117:2007 Information technology Fibre Channel Part 117: Methodologies for jitter and signal quality (MJSQ)
    IEC 61754-6:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
    ISO/IEC 14165-211 : 1999(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 211: MAPPING TO HIPP-FP (FC-FP)
    IEC 61754-20:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
    IEC 61280-2-1:2010 Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement
    IEC 61754-4:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
    IEC 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
    IEC 61300-2-6:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    ISO/IEC 14165-331:2007 Information technology Fibre Channel Part 331: Virtual Interface (FC-VI)
    ISO/IEC 14165-114:2005 Information technology Fibre Channel Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
    ISO/IEC 14165-251:2008 Information technology Fibre Channel Part 251: Framing and Signaling (FC-FS)
    IEC 61754-19:2001 Fibre optic connector interfaces - Part 19: Type SG connector family
    IEC 61076-3-103:2003 Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
    IEC 61300-3-11:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective