ISO/TR 10064-4:1998
Current
Current
The latest, up-to-date edition.
Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
15-10-1998
DocumentType |
Technical Report
|
Pages |
25
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
SAC GB/Z 18620.4 : 2002 | Identical |
NEN NPR ISO/TR 10064-4 : 1998 C1 2006 | Identical |
BS ISO/TR 10064-4:1998 | Identical |
DIN ISO 14635-2:2010-01 | Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004) |
11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
AGMA ISO 1328 2 : 1999 | CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
05/30128083 DC : DRAFT JAN 2005 | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
DIN ISO 14635-1:2006-05 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) |
AGMA 912 : A | MECHANISMS OF GEAR TOOTH FAILURE |
AGMA 2015-1 : A | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
AGMA 915-2 : A | INSPECTION PRACTICES - PART 2: CYLINDRICAL GEARS - RADIAL MEASUREMENTS |
VDI/VDE 2613:2003-12 | Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears |
VDI/VDE 2609:2000-10 | Determination of tooth contact patterns for gearings |
PD ISO/TR 10064-6:2009 | Code of inspection practice Bevel gear measurement methods |
BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
04/30112988 DC : DRAFT APR 2004 | ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
05/30134748 DC : DRAFT JUNE 2005 | ISO 14521 - GEARS - CALCULATION OF LOAD CAPACITY OF WORMGEARS |
BS ISO 14635-3:2005 | Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
AGMA ISO 17485 : A | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
PD ISO/TR 14521:2010 | Gears. Calculation of load capacity of wormgears |
BS 436-5:1997 | Spur and helical gears Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
BS ISO TR 10064-2:1996 | Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO/TR 10064-6:2009 | Code of inspection practice Part 6: Bevel gear measurement methods |
ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
ISO 17485:2006 | Bevel gears ISO system of accuracy |
EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
DIN ISO 14635-3:2011-08 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005) |
BS ISO 17485:2006 | Bevel gears. ISO system of accuracy |
BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
ISO/TR 14521:2010 | Gears Calculation of load capacity of wormgears |
BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 1328-2:1997 | Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
ISO 701:1998 | International gear notation Symbols for geometrical data |
AGMA 2000 : A | GEAR CLASSIFICATION AND INSPECTION HANDBOOK - TOLERANCES AND MEASURING METHODS FOR UNASSEMBLED SPUR AND HELICAL GEARS (INCLUDING METRIC EQUIVALENTS) |
ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO 13281:1997 | Industrial automation systems — Manufacturing Automation Programming Environment (MAPLE) — Functional architecture |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.