ISO/TS 21609:2014
Current
Current
The latest, up-to-date edition.
Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
17-04-2014
€94.00
Excluding VAT
ISO/TS 21609:2014 gives requirements and recommendations for the installation in road vehicles of radio frequency (RF) transmitting and receiving equipment, "in-road-vehicle" mounting kits for transportable and hand-held RF equipment, and ancillary equipment associated with these.
As well as methods for installation, it establishes methods for minimizing the possibility of electromagnetic interference (EMI) between the installed equipment and the vehicle electrical and electronic systems.
| Committee |
ISO/TC 22/SC 32
|
| DocumentType |
Technical Specification
|
| Pages |
15
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 11451,ECE-R 10,ECE-R 116,RSS–119,RSS–128,RSS–129,RSS–136
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PD ISO/TS 21609:2014 | Identical |
| NEN NPR ISO/TS 21609 : 2014 | Identical |
| I.S. EN 15213-4:2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| ETSI EN 301 489-33 V1.1.1 (2009-02) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions for Ultra Wide Band (UWB) communications devices |
| CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
| ETSI EN 301 489-24 V1.5.1 (2010-10) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24:Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment |
| ETSI EN 301 489-16 V1.2.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable |
| ETSI EN 301 489-31 V1.1.1 (2005-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
| ETSI EN 301 489-11 V1.3.1 (2006-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters |
| ETSI EN 301 489-22 V1.3.1 (2003-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| ETSI EN 301 489-19 V1.2.1 (2002-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| ETSI EN 301 489-3 V1.6.1 (2013-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| ISO 14982:1998 | Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria |
| ETSI EN 301 489-7 V1.3.1 (2005-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
| ETSI EN 301 489-27 V1.1.1 (2004-06) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
| ETSI EN 301 489-18 V1.3.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment |
| ETSI EN 301 489-17 V2.2.1 (2012-09) | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| ISO 13766:2006 | Earth-moving machinery — Electromagnetic compatibility |
| 119999/5/EC : 1999 | DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY |
| ETSI EN 301 489-4 V2.2.1 (2015-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment |
| ETSI EN 301 489-9 V1.4.1 (2007-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
| ETSI EN 301 489-1 V2.1.1 (2017-02) | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.