![header thumbnail](/images/img-default-logo.png)
MIL-DTL-17060 Revision G:2009
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - EXAMINATION OF SERVICE A MOTORS
APPENDIX B - ENGINEERING DRAWINGS TECHNICAL CONTENT
REQUIREMENTS
APPENDIX C - TEST PROCEDURES FOR MOTOR EFFICIENCY
APPENDIX D - TEST REPORT TECHNICAL CONTENT REQUIREMENTS
APPENDIX E - CERTIFICATION DATA/REPORT TECHNICAL CONTENT
REQUIREMENTS
APPENDIX F - SHOCK TEST REPORT TECHNICAL CONTENT REQUIREMENTS
APPENDIX G - EQUIPMENT AIRBORNE AND STRUCTUREBORNE NOISE
MEASUREMENTS TEST REPORT - TECHNICAL CONTENT
REQUIREMENTS
APPENDIX H - INSPECTION AND TEST PLAN - TECHNICAL CONTENT
REQUIREMENTS
INDEX
Specifies the requirements for three-phase, alternating current (AC) motors for shipboard use in frame sizes not less than 182.
Committee |
FSC 6105
|
DevelopmentNote |
Supersedes MIL M 17060 (F). (01/2009)
|
DocumentType |
Standard
|
Pages |
199
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
MIL-DTL-24151 Revision B:2016 | DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
MIL-PRF-24755 Revision B:2010 | Fans, Vaneaxial, High Pressure, Naval Shipboard |
MIL-PRF-18953 Revision C:2005 | FANS, VANEAXIAL AND TUBEAXIAL, VENTILATION AND AIR CONDITIONING, NAVAL SHIPBOARD |
MIL-DTL-17840 Revision D:2018 | Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application) |
MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
A-A-59589 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING SLOT, DIMENSION SERIES 03 |
NEMA MW 1000 : 2016 | MAGNET WIRE |
MIL-STD-2037 Base Document:1991 | PROCEDURE TO OBTAIN CERTIFICATION FOR ELECTRIC MOTOR SEALED INSULATION SYSTEMS |
A-A-59586 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 04 |
A-A-59641 Revision B:2011 | BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, DIMENSION SERIES 33 |
ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
MIL-C-24707-5 Base Document:1989 | CASTINGS, DUCTILE IRON AND AUSTENITIC DUCTILE IRON |
A-A-59640 Revision B:2011 | BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, DIMENSION SERIES 32 |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
A-A-59629 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 02 |
A-A-59637 Revision B:2011 | BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, DIMENSION SERIES 33 |
ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
SAE AMS 7276H : 2011 | RUBBER: FLUOROCARBON (FKM) HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
MIL-DTL-21248 Revision D:2015 | Ring, Retaining (Tapered and Reduced Section Type) |
A-A-59685 Base Document:2001 | Grease, Sealed Ball and Roller Bearing |
A-A-59596 Revision C:2009 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG, DIMENSION SERIES 33 |
A-A-59584 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02 |
MIL-PRF-17331 Revision K:2013 | LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
A-A-59632 Revision B:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEGREES THROUGH 45 DEGREES, DIMENSION SERIES 10 |
IEC TS 61934:2011 | Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses |
MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
A-A-59627 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEGREES THROUGH 22 DEGREES, DIMENSION SERIES 04 |
SAE AMS 2469 : 2014 | HARD ANODIC COATING ON ALUMINUM AND ALUMINUM ALLOYS |
MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
ASTM A 683 : 2016 : REDLINE | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
A-A-59630 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 03 |
MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
MIL C 24707/1 : 0 | CASTINGS, FERROUS, FOR MACHINERY AND STRUCTURAL APPLICATIONS |
SAE AMS 7259 : 2013 | RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
MIL-I-24178 Base Document:1966 | INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD |
A-A-59638 Revision B:2011 | Bearing, Ball, Annular, Double Row, Angular Contact, Non-Filling Slot, Vertex of Contact Angles Inside Bearing, Dimension Series 32 |
ASTM A 757/A757M : 2015 : REDLINE | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
MIL-B-17931 Revision E:1987 | BEARINGS, BALL, ANNULAR, FOR QUIET OPERATION |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
A-A-59626 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEGREES THROUGH 22 DEGREES, DIMENSION SERIES 03 |
IEC 60034-18-41:2014 | Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests |
A-A-59597 Revision C:2009 | BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 02 |
A-A-59636 Revision B:2011 | BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, DIMENSION SERIES 32 |
A-A-59583 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 10 |
A-A-59600 Revision C:2009 | BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 23 |
ASTM B 30 : 2016 : REDLINE | Standard Specification for Copper Alloys in Ingot Form |
A-A-59599 Revision C:2009 | BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 22 |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
A-A-59625 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEGREES THROUGH 22 DEGREES, DIMENSION SERIES 02 |
A-A-59623 Revision C:2011 | Bearing, Ball, Annular, Single Row, Angular Contact, Contact Angle 11 Degrees Through 22 Degrees, Dimension Series 19 |
MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
A-A-59624 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEGREES THROUGH 22 DEGREES, DIMENSION SERIES 10 |
A-A-59634 Revision B:2010 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEGREES THROUGH 45 DEGREES, DIMENSION SERIES 03 |
A-A-59582 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 19 |
A-A-59587 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING SLOT, DIMENSION SERIES 02 |
A-A-59633 Revision B:2010 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEGREES THROUGH 45 DEGREES, DIMENSION SERIES 02 |
ASTM A 677 : 2016 : REDLINE | Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
A-A-59628 Revision C:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 10 |
MIL-P-15024-5 Base Document:1971 | PLATE, IDENTIFICATION |
A-A-59635 Revision B:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEGREES THROUGH 45 DEGREES, DIMENSION SERIES 04 |
IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
MIL-DTL-2036 Revision E:2014 | ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
ASTM B21/B 21M : 2014-10 | SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES |
MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
A-A-59631 Revision B:2011 | BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 04 |
FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
A-A-59598 Revision C:2009 | BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 03 |
A-A-59639 Revision B:2011 | BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE BEARING, DIMENSION SERIES 33 |
MIL-M-24738 Base Document:1990 | MONITORS, HIGH TEMPERATURE MOTOR PROTECTION |
A-A-59720 Base Document:2002 | SEALING AND LOCKING COMPOUNDS, SINGLE-COMPONENT |
MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
A-A-59581 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, BORE DIAMETERS UNDER 10 MM |
A-A-59595 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG, DIMENSION SERIES 32 |
A-A-59585 Revision C:2008 | BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03 |
AWS A5.8 : 1992 | FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.