MIL-DTL-21097 Revision H:2017
Current
The latest, up-to-date edition.
Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
01-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the multicontact connectors for 1/16, 3/32, and 1/8 inch printed wiring boards, and for interconnections between printed wiring boards.
| DevelopmentNote |
Supersedes MIL C 21097 (E). (10/2005)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers multicontact connectors for 1/16, 3/32, and 1/8 inch printed wiring boards, and for interconnections between printed wiring boards. The connectors are intended to provide a reliable connection between printed wiring and conventional wiring. The interconnector concept is intended to provide connection of printed wiring on one board to printed wiring on another board.
| MIL-DTL-21097-16 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, CRIMP, REMOVABLE, TYPE CR |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-DTL-21097-15 Revision G:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (NO MOUNTING PROVISION) |
| MIL-DTL-21097-13 Revision C:2005 | Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing: 0.200, Alternate Dual Row, Type CR, Removable Contact |
| MIL-PRF-22710-12 Revision G:2007 | SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, SEALED MODULES, ILLUMINATED OR NON-ILLUMINATED), (TOP RELAMPABLE), STYLE SRPC12 |
| MIL-DTL-21097-4 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CR |
| MIL-DTL-21097-17 Revision E:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, SOLDER, REMOVABLE, TYPE CR |
| MIL-DTL-21097-18 Revision D:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD TOOL, CONTACT, REMOVAL, FOR TYPE CR CONNECTOR CONTACTS |
| MIL-DTL-21097-5 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CS |
| MIL-DTL-21097-14 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (MOUNTING PROVISION A) |
| MIL-DTL-21097-3 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS |
| MIL-DTL-21097-2 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) SINGLE ROW, TYPE CR |
| MIL-DTL-21097-19 Revision D:2005 | Connectors, Electrical, Printed Wiring Board Blade Simulator for Measuring Engagement and Separation Forces for Type CR Contacts |
| MIL-DTL-21097-11 Revision J:2005 | Connectors, Electrical, Printed Wiring Board Keys, Polarizing |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| SAE AMS2418J | Plating, Copper |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-22520 Revision G:1997 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| SAE AMS2403M | Plating, Nickel General Purpose |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-M-24519 Revision E:1992 | MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| SAE AMSP81728B | Plating, Tin-Lead (Electrodeposited) |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.