MIL-DTL-24509 Revision B:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Valves, Flanged, Balland Plugfor Sewageand Seawater Service
06-05-2021
English
03-10-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies flanged ball and plug valves for sewage and seawater service, under pressure or vacuum.
| DevelopmentNote |
Supersedes MIL V 24509 (A). (10/2017) New child NOT 1 2023 is now added.
|
| DocumentType |
Standard
|
| Pages |
18
|
| ProductNote |
New child NOT 1 2023 is now added.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This specification covers flanged ball and plug valves for sewage and seawater service, under pressure or vacuum. Sewage contains seawater with varying amounts of detergents, caustics, acids, human wastes, sediments, oils, greases, solvents, and other chemical agents used on board ship.
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| SAE AMS7276H | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems |
| ASTM B 466/B 466M : 2014-05 | SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| MIL-C-24723 Base Document:1989 | CASTINGS, NICKEL-COPPER ALLOY |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MS18229 Revision C:2017 | PLUG FOR O-RING GASKET |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| ASTM B 169/B169M : 2015 : REDLINE | Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar |
| MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
| SAE J1926/1_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing |
| SAE AMS7259E | Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems |
| MIL-B-24480 Revision A:1985 | BRONZE, NICKEL-ALUMINUM CASTINGS FOR SEAWATER SERVICE |
| MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
| ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
| SAE AMSSTD595A | Colors Used in Government Procurement |
| MIL-STD-798 Base Document:1965 | NONDESTRUCTIVE TESTING, WELDING, QUALITY CONTROL, MATERIAL CONTROL AND IDENTIFICATION AND HI-SHOCK TEST REQUIREMENTS FOR PIPING SYSTEM COMPONENTS FOR NAVAL SHIPBOARD USE |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| MIL-PRF-20042 Revision F:2015 | FLANGES, PIPE, BRONZE (SILVER BRAZING) |
| ASTM A 494/A494M : 2017-03 | SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.