MIL-DTL-3124 Revision E:2014
Current
The latest, up-to-date edition.
Generator, Alternating Current, 60-Hertz (Naval Shipboard Use)
English
01-04-2014
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies salient-pole and round rotor (cylindrical), continuous duty, 60-Hertz, constant speed, single- and three-phase generators, up to 8,000 kilowatts (kW).
| DevelopmentNote |
Supersedes MIL G 3124 (D). (06/2014)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers salient-pole and round rotor (cylindrical), continuous duty, 60-Hertz, constant speed, single- and three-phase generators, up to 8,000 kilowatts (kW).
| MIL-I-24092 Revision D:1993 | Insulating Varnishes and Solventless Resins for Application by the Dip Process |
| NEMA MW 1000 : 2016 | MAGNET WIRE |
| MIL-HDBK-298 Base Document:1988 | Selection, Installation and Troubleshooting of Resistance Thermometers and Thermocouple Sensors |
| MIL-G-3087 Revision C:1973 | Generator Sets, Steam Turbine (Direct and Alternating Current) (Naval Shipboard Use) |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| MIL-G-21410 Revision A:1991 | Governing Systems, Speed and Load-Sensing Naval Shipboard Use |
| MIL-C-24707-5 Base Document:1989 | Castings, Ductile Iron and Austenitic Iron |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| MIL-PRF-17331 Revision K:2013 | Lubricating Oil, Steam Turbine and Gear, Moderate Service |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-G-22077 Revision C:1993 | Generator Sets, Gas Turbine, Direct and Alternating Current Naval Shipboard Use |
| MIL-T-24388 Revision C:1990 | Thermocouple and Resistance Temperature Detector Assemblies, General Specification for (Naval Shipboard) |
| MIL-R-2729 Revision D:1992 | Regulator-Exciter Systems, Voltage, A.C. Generator, Naval Shipboard Use |
| SAE J1926/1_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing |
| MIL C 24707/1 : 0 | CASTINGS, FERROUS, FOR MACHINERY AND STRUCTURAL APPLICATIONS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL H 22577 : C | HEATING ELEMENTS, ELECTRICAL, CARTRIDGE, SHIP AND TUBULAR TYPE |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| MIL-DTL-32353 Revision A:2012 | Hydraulic and Lubricating Oil, Synthetic Hydrocarbon Base |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| MIL-STD-1399-300 Revision B:2008 | Department of Defense Interface Standard Section 300B Electric Power, Alternating Current (S/S By MIL-STD-1399-300-1) |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-T-15377 Revision F:1979 | Temperature Monitor Equipment Naval Shipboard (S/S by ASTM-F2362) |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-STD-1474 Revision E:2015 | Noise Limits |
| MIL-P-15024-5 Base Document:1971 | Plate, Identification |
| MIL-DTL-2036 Revision E:2014 | Enclosures for Electric and Electronic Equipment, Naval Shipboard |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-DTL-24643-16 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSTSGU |
| MIL-I-24768 Base Document:1992 | Insulation, Plastics, Laminated, Thermosetting; General Specification for |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
| MIL-STD-705 Revision D:2016 | Mobile Electric Power Systems |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.