MIL-DTL-3933 Revision L:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Attenuators, Fixed, Space Level, Non-Space Level General Specification for
10-07-2014
17-05-2021
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURES FOR QUALIFICATION INSPECTION
AND GROUP QUALIFICATION BY CHARACTERISTICS
APPENDIX B - BOILERPLATE TABLES DEFINING ATTENUATOR
CLASSES (PERFORMANCE LEVELS FOR USE IN
SPECIFICATION SHEETS)
APPENDIX C - SURFACE MOUNT CHIP ATTENUATORS
QUALIFICATION AND CONFORMANCE INSPECTION
APPENDIX D - VISUAL RESISTOR CARD INSPECTION
(Space Level Only)
Specifies the general requirements for radio and microwave frequency fixed attenuators, including chip, coaxial, leaded, and relay header attenuators.
| DevelopmentNote |
Supersedes MIL A 3933 (E). (11/2002)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| Supersedes |
This specification covers the general requirements for radio and microwave frequency fixed attenuators, including chip, coaxial, leaded, and relay header attenuators (see 6.1). This specification provides three device level designators; a space level (T) part number is intended for space application, (S) screened and (N) non-screened part numbering are intended for all other applications (see 1.4).
| DSCC 13014 : B | ATTENUATORS, FIXED, COAXIAL LINE (SMA CONNECTORS), FREQUENCY RANGE: DC TO 12.4 GHZ, CLASS 4, LOW POWER |
| MIL-DTL-3933-17 Revision D:2011 | Attenuators, Fixed, Space Level, Non Space Level, Coaxial Line (TNC Connectors), Frequency Range: DC to 18 GHz, Class IV, Low Power |
| DSCC 13013 : B | ATTENUATORS, FIXED, COAXIAL LINE (SERIES N), FREQUENCY RANGE: DC TO 18 GHZ, CLASS 3, MEDIUM POWER |
| MIL-DTL-3933-30 Revision A:2014 | Attenuators, Fixed Coaxial Connector Space Level, Non Space Level, Type 2.92 mm (SMK) Frequency Range: DC to 32 GHz, Class III, Low Power |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-3933-14 Revision F:2014 | Attenuators, Fixed, Space Level, Non Space Level, Coaxial Line (SMA Connectors), Frequency Range: DC to 12.4 GHz, Class IV, Low Power |
| MIL-DTL-3933-10 Revision G:2011 | Attenuators, Fixed, Space Level, Non Space Level Coaxial Line (Series N), Frequency Range: DC to 18 GHz, Class III, Medium Power (See Notice 1 for Replacement Information) |
| MIL-DTL-3933-27 Base Document:2004 | Attenuators, Fixed, Coaxial Line (SMP Connectors - SMP Full Detent Male to SMP Full Detent Male), Frequency Range: DC to 18 GHZ (No S/S Document) |
| MIL-DTL-3933-29 Revision A:2011 | Attenuators, Fixed, Space Level, Non Space Level, Chip, (Surface Mount), 0-20 DB, Frequency Range: DC To 18 GHZ, Class IV (No S/S Document) |
| MIL-A-3933-24 Revision C:2014 | Attenuators, Fixed, Coaxial Line (SMA Connectors), Bulkhead, Class IV, Low Power |
| DSCC 13015 : A | ATTENUATORS, FIXED, COAXIAL LINE (SERIES N), FREQUENCY RANGE: DC TO 12.4 GHZ, CLASS 3, LOW POWER |
| DSCC 13016 : A | ATTENUATORS, FIXED, MINIATURE, COAXIAL LINE (SMA CONNECTORS), FREQUENCY RANGE: DC TO 18 GHZ, CLASS 4, LOW POWER |
| MIL-DTL-3933-25 Revision D:2014 | Attenuators, Fixed, Miniature, Space Level, Non Space Level, Coaxial Line (SMA Connectors), Frequency Range: DC to 18 GHz, Class IV, Low Power |
| MIL-DTL-3933-28 Base Document:2004 | Attenuators, Fixed, Coaxial Line (SMP Connectors - SMP Full Detent Male to SMP Full Detent Male), 0dB, Frequency Range: DC to 18GHZ (No S/S Document) |
| MIL-DTL-3933-32 Base Document:2010 | Attenuators, Fixed Coaxial Connector Space Level, Non Space Level Type 2.92 mm (SMK) Frequency Range: DC to 42 GHz, Class III, Low Power |
| MIL-DTL-3933-16 Revision E:2011 | Attenuators, Fixed, Space Level, Non Space Level Coaxial Line (SMA Connectors), Frequency Range: DC to 18 GHz, Class IV, Low Power |
| MIL-A-3933-23 Revision C:2009 | Attenuators, Fixed, To-5 Configuration, Class IV, Low Power (NO S/S Document) |
| MIL-DTL-3933-18 Revision H:2014 | Attenuators, Fixed, Space Level, Non Space Level, Coaxial Line (Series N), Frequency Range: DC to 12.4 GHZ and DC to 18 GHZ, Class III, Low Power |
| MIL-DTL-3933-31 Base Document:2010 | Attenuators, Fixed Coaxial Connector Space Level, Non Space Level Type 3.5 mm Connector Frequency Range: DC to 28 GHz, Class III, Low Power |
| MIL-DTL-3933-19 Revision C:2011 | Attenuators, Fixed, Space Level, Non Space Level, Coaxial Line (BNC Connectors), Frequency Range: DC to 4.5 GHZ, Class III, Low Power |
| MIL-DTL-3890 Revision C:2013 | Lines, Radio Frequency Transmission (Coaxial, Air Dielectric), General Specification for |
| SAE AMS2404G | Plating, Electroless Nickel |
| MIL-DTL-55302 Revision G:2009 | Connectors, Printed Circuit Subassembly and Accessories |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-STD-883 Revision K:2016 | Microcircuits |
| MIL-PRF-39012 Revision F:2014 | Connectors, Coaxial, Radio Frequency, General Specification for |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| SAE AMS4376H | Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26) Cold Rolled and Partially Annealed |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| SAE AMS4375L | Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized |
| IEEE 287 : 2007 | PRECISION COAXIAL CONNECTORS (DC TO 110 GHZ) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| MIL-DTL-3933-29 Revision A:2011 | Attenuators, Fixed, Space Level, Non Space Level, Chip, (Surface Mount), 0-20 DB, Frequency Range: DC To 18 GHZ, Class IV (No S/S Document) |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.