MIL-DTL-45932 Revision A:2015
Current
The latest, up-to-date edition.
Insert, Screw Thread, Thin Wall, Locked in: General Specification for
05-05-2015
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for thin wall, solid bushing, locked in, screw thread inserts.
| DevelopmentNote |
Supersedes MIL I 45932. (05/2015) NEW CHILD NOT 1 2021 IS ADDED
|
| DocumentType |
Standard
|
| Pages |
23
|
| ProductNote |
NEW CHILD NOT 1 2021 IS ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for thin wall, solid bushing, locked in, screw thread inserts. The method of locking in the insert into the parent material to resist rotation should be by means of an integral locking device, either metallic or non-metallic (see 6.1).
| ASTM F 1941/F1941M : 2016 : REDLINE | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| SAE AMS6322P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| MIL-DTL-45932-3 Revision C:2015 | Insert, Screw Thread - Thin Wall, Locked In, Oversize Replacer |
| SAE AMS5643U | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
| MIL-DTL-45932-1 Revision D:2015 | Insert, Screw Thread - Thin Wall, Locked in |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS4650M | Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu - 1.9Be Solution Heat Treated TB00 (A) |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AIR4127A | Steel: Chemical Composition and Hardenability |
| SAE AMS2411H | Plating, Silver for High Temperature Applications |
| SAE AMS4117K | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651) |
| MIL-DTL-45932-2 Revision C:2015 | Insert, Screw Thread - Thin Wall, Locked-In, Non Metallic Locking Element (-60 Degrees to +250 Degrees Fahrenheit) |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| L-P-410 Revision A:1966 | Plastic, Polymide (Nylon), Rigid: Rods, Tubes, Flats, Molded and Cast Parts |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS4128D | Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching |
| SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| MIL-PRF-46010 Revision H:2013 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738 |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.