MIL-DTL-6807 Revision F:2012
Current
The latest, up-to-date edition.
Switches, Rotary, Selector Power, General Specification for
03-12-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for closed construction rotary switches designed for use in power circuits and capable of making, carrying, and breaking electrical loads of up to and including 10 amperes, unless otherwise specified.
| DevelopmentNote |
Supersedes MIL S 6807 (D). (02/2005)
|
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for closed construction rotary switches designed for use in power circuits and capable of making, carrying, and breaking electrical loads of up to and including 10 amperes, unless otherwise specified (see 3.1).
| MIL HDBK 1132 : 0 | SWITCHES, SELECTION AND USE OF |
| MS25002 Revision K:2011 | SWITCH, ROTARY, 28/115 VOLTS |
| MIL-STD-202-207 Base Document:2015 | METHOD 207, HIGH IMPACT SHOCK |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| MIL-I-24768-2 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEE) |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-I-24768-1 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GME) |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-I-24768-3 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEB) |
| MIL-I-24768-17 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, SILICONE-RESIN (GSG) |
| SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-310 Base Document:2015 | Method 310, Contact-Chatter Monitoring |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
| MIL-STD-202-307 Base Document:2015 | Method 307, Contact Resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.