![header thumbnail](/images/img-default-logo.png)
MIL-M-24605 Revision A:1988
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
MONITOR, HEAT STRESS
English
Outlines an environmentally hardened portable instrument that changes the surrounding thermal energy in a way that can be electrically evaluated and changed to various parameters that include the dry bulb temperature, wet bulb and globe temperature and a heat stress index. This heat stress monitor can be microprocessor based.
Committee |
FSC 6665
|
DocumentType |
Standard
|
Pages |
17
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
MIL R 22097 : G | RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR |
W-C-596-76 Revision B:1981 | CONNECTOR, CABLE OUTLET, ELECTRICAL, MIDGET LOCKING, SPECIFIC PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS |
MIL C 39003 : H | CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL-C-28901-5 Base Document:1980 | CONNECTOR, ELECTRICAL, PLUGS, TIP, SINGLE MINIATURE, (TEST POINT PLUG) .080 |
MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
FED-STD-H28-18 Revision B:1991 | SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 18 PHOTOGRAPHIC EQUIPMENT THREADS |
W-C-596-13 Revision E:2016 | CONNECTOR, PLUG, ELECTRICAL, GENERAL PURPOSE, HOSPITAL GRADE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ |
ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
MS51940 Revision C:1971 | LOOP, SLIDE (FOR EQUIPAGE) |
W-C-596-147 Base Document:1978 | CONNECTOR, MALE INLET, ELECTRICAL, SPECIFIC PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ |
MIL-STD-701 Revision P:1992 | LISTS OF STANDARD SEMICONDUCTOR DEVICES |
MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
MIL-STD-275 Revision E:1984 | PRINTED WIRING - ELECTRONIC EQUIPMENT |
MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
MIL-M-28787 Revision D:1989 | MODULES, STANDARD ELECTRONIC, GENERAL SPECIFICATION FOR |
MIL-STD-199 Revision E:1991 | RESISTOR, SELECTION AND USE OF |
MIL C 14157 : LATEST | CAPACITOR, FIXED, PAPER (PAPER PLASTIC) OR PLASTIC DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL R 29 : A | RESISTOR, FIXED, METER MULTIPLIER, EXTENDED [HIGH VOLTAGE, FERRULE TERMINAL TYPE] |
MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
MIL C 81 : C | CAPACITORS VARIABLE CERAMIC DIELECTRIC GENERAL SPECIFICATION FOR |
MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
MIL F 19207/36 : B | FUSEHOLDER, EXTRACTOR POST TYPE, NONINDICATING, R.F. SHIELDED TYPE FHN55W |
MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
MIL-I-1361 Revision C:1985 | INSTRUMENT AUXILIARIES, ELECTRICAL MEASURING, SHUNTS, RESISTORS, AND TRANSFORMERS |
MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
MIL-C-85049 Revision A:1990 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
MIL-T-55164 Revision C:1987 | TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR |
MIL T 27 : E | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) GENERAL SPECIFICATION FOR |
MIL C 83503 : A | CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR |
MS3106 Revision D:1992 | CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE |
MIL C 19978 : F | CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR |
MIL-C-28901 Base Document:1980 | CONNECTORS, ELECTRICAL, PLUGS, TIP, (TEST POINT PLUG, BANANA PLUG) GENERAL SPECIFICATION FOR |
MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
MIL S 15743 : C | SWITCH, ROTARY, ENCLOSED |
MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
MIL R 15109 : C | RESISTOR AND RHEOSTATS NAVAL SHIPBOARD |
MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
QQ-A-591 Revision F:1981 | ALUMINUM ALLOY DIE CASTINGS |
MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD |
MIL-STD-1389 Revision D:1989 | DESIGN REQUIREMENTS FOR STANDARD ELECTRONIC MODULES |
MIL S 3950 : F | SWITCH, TOGGLE ENVIRONMENTALLY SEALED, GENERAL SPECIFICATION FOR |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
MIL-STD-198 Revision E:1984 | CAPACITOR, SELECTION AND USE OF |
MIL S 19500 : J | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
JJ-S-750 Revision A:1967 | STRAP, WEBBING |
MIL-P-15024-5 Base Document:1971 | PLATE, IDENTIFICATION |
MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
W-C-596 Revision H:2014 | CONNECTOR, ELECTRICAL, POWER, GENERAL SPECIFICATION FOR |
MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
MIL F 19207 : D (1) SUPP 1 | FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR |
MIL R 12934 : H NOTICE 1 | RESISTOR, VARIABLE, WIREWOUND, PRECISION GENERAL SPECIFICATION FOR |
FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
MIL P 55110 : LATEST | PRINTED WIRING BOARD, RIGID GENERAL SPECIFICATION FOR |
MIL C 39024 : A | CONNECTOR, ELECTRICAL, TEST POINT TYPE, PANEL TYPE, SINGLE TEST POINT (THREADED), HIGH VOLTAGE |
MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.