MIL-PRF-21260 Revision E:1998
Current
The latest, up-to-date edition.
Lubricating Oil, Internal Combustion Engine, Preservative Break-in
31-07-1998
Covers engine oils that are suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark and compression ignition types and power transmission fluid applications in equipment for use in combat/tactical service.
| DevelopmentNote |
E NOTICE 1 - Notice of Validation. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This performance specification covers engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types, and of power transmission fluid applications in equipment used in combat/tactical service (see 6.1, 6.7 and 6.9).
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL-PRF-46167 Revision D:2005 | Lubricating Oil, Internal Combustion Engine, Arctic |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| MIL-STD-3003 Revision B:2007 | Vehicles, Wheeled: Preparation for Shipment and Storage of |
| MIL-STD-107 Revision J:2001 | Preparation and Handling of Industrial Plant Equipment (IPE) for Shipment and Storage (No S/S Document) |
| MIL-DTL-45360 Revision J:2016 | Carriers, Personnel, Full-Tracked, Armored: M113A2, and M113A3; Mortars, Self-Propelled: M106A2 (107MM), M125A2 (81MM) and M1064, M1064A3 (120MM); Smoke Generators: M1059, M1059A3 and M58; Processing for Storage and Shipment of |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| MIL-DTL-13444 Revision H:2006 | Hose and Hose Assemblies, Rubber: Fuel and Oil |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-PRF-53051 Revision C:2017 | Pumping Assemblies, Wheel-Mounted, Diesel Engine Driven, Bulk Transfer, Fuel and Potable Water Pumping Service |
| MIL-DTL-62186 Revision C:2009 | Generator, Alternating Current (650 Ampere Rectified), 28 Volts Direct Current (Oil Cooled) |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| SAE J304_201606 | Engine Oil Tests |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| SAE J183_201611 | Engine Oil Performance and Engine Service Classification (Other than “Energy Conserving”) |
| ASTM D 5480 : 1995 : R1999 : EDT 1 | Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003) |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| ASTM D 129 : 2013-08 | TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD) |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| ASTM D 2896 : 2015 : REDLINE | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 524 : 2015 : REDLINE | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| SAE J300_201501 | Engine Oil Viscosity Classification |
| MIL-PRF-46167 Revision D:2005 | Lubricating Oil, Internal Combustion Engine, Arctic |
| ASTM D 4628 : 2016 : REDLINE | Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry |
| ASTM D 4047 : 2013-08 | TEST METHOD FOR PHOSPHORUS IN LUBRICATING OILS AND ADDITIVES BY QUINOLINE PHOSPHOMOLYBDATE METHOD |
| ASTM D 4624 : 1993 : R1998 | Standard Test Method for Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High-Shear Rates (Withdrawn 2004) |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.