MIL-PRF-22097 Revision J:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Resistor, Variable, Nonwirewound, (Adjustment Type), General Specification for
27-07-2007
15-04-2021
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Describes the general requirements for multi-turn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator.
| DevelopmentNote |
Supersedes MIL R 22097 (G). (02/2002)
|
| DocumentType |
Standard
|
| Pages |
152
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers the general requirements for multi-turn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70OC and 85OC, and are capable for continuous operation when properly derated, at a maximum temperature of 125OC and 150OC (see figure 1). These resistors have a resistance of ±10 percent (see 3.1).
| DSCC 86097 : F | RESISTOR, VARIABLE, PANEL MOUNTED, 1 WATT |
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| DSCC 97012 : C | RESISTOR, VARIABLE, NONWIRE-WOUND, TRIMMER, 3/4 WATT, FLEXIBLE LEADS |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| MIL-PRF-22097-3 Revision J:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style RJ22 |
| DSCC 85085 : D | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, 1/2 WATT, TRIMMER |
| MIL-PRF-22097-1 Revision J:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style RJ11 |
| MIL-PRF-22097-2 Revision H:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style RJ12 |
| MIL-PRF-22097-5 Revision E:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style RJ26 |
| MIL-PRF-22097-4 Revision F:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Lead Screw Actuated, Style RJ24 |
| MIL-PRF-22097-6 Revision G:2010 | Resistor, Variable, Nonwirewound, Adjustment Type, Single Turn, Style RJ50 |
| DSCC 88040 : F | RESISTOR, VARIABLE, SURFACE MOUNT, NONWIREWOUND, TRIMMER |
| DSCC 10009 : 0 | RESISTOR, VARIABLE, SURFACE MOUNT, 4MM, MULTITURN TRIMMER, 1/4 WATT |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-202-304 Base Document:2015 | Method 304, Resistance-Temperature Characteristic |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-202-107 Base Document : 2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.