MIL-PRF-28861 Revision E:2016
Current
The latest, up-to-date edition.
Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for
English
28-09-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION FOR
CLASS B FILTERS
APPENDIX B - GUIDELINES FOR DESTRUCTIVE PHYSICAL ANALYSIS
(DPA) OF CLASS S FILTERS
Describes the general requirements for low-pass filter and capacitors used to suppress radio frequency/electromagnetic interface.
| DevelopmentNote |
Supersedes MIL F 28861. (06/2005)
|
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for low-pass filter and capacitors used to suppress radio frequency/electromagnetic interference. Filters furnished to the requirements of this specification contain shunting ceramic discoidal capacitors and series inductors (FSC 5915). Capacitors furnished to the requirements of this specification contain shunting ceramic discoidal capacitors (FSC 5910). For the purposes of this specification, feed-through capacitor types (C circuit configuration) are referred to herein as a filter. Passband power may be alternating current (ac) or direct current (dc) and the filters used primarily in the reduction of broadband radio frequency interference. This specification provides for two levels of product assurance requirements. Filters covered by this specification are capable of operation over the temperature range of -55°C to +125°C.
| DSCC 98024 : C | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED |
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| DSCC 88051 : H | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, NONHERMETICALLY SEALED |
| MIL-PRF-28861-1 Revision E:2016 | Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Styles FS10 and FS11 |
| DSCC 84084 : K | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED |
| DSCC 98024D:2023 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| DSCC 97007 : B | CAPACITORS, FIXED, CERAMIC DIELECTRIC, NON-HERMETICALLY SEALED, FEED-THROUGH |
| DSCC 97006 : C | CAPACITORS, FIXED, CERAMIC DIELECTRIC, NON-HERMETICALLY SEALED, FEEDTHROUGH |
| MIL-PRF-28861-5 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS50 |
| DSCC 84083 : J | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED |
| DSCC 84080 : F | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED ON ONE END ONLY |
| MIL-PRF-28861-3 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS30 |
| MIL-PRF-28861-6 Revision E:2010 | Filters and Capacitors, Radio Frequency/Electromagnetic Interference, Suppression, Nonhermetically Sealed, Style FS60 |
| ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| DSCC 84082 : F | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED ON ONE END ONLY |
| MIL-PRF-31033 Revision B:2011 | Capacitor, Fixed, Ceramic Dielectric, High Reliability, Discoidal, General Specification for |
| DSCC 86131 : J | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, NONHERMETICALLY SEALED |
| MIL-PRF-28861-12 Revision G:2012 | Filters, and Capacitors, Radio Frequency/Electromagnetic Interference, Suppression, Hermetically Sealed on One End Only, Style FS70 |
| MIL-PRF-28861-4 Revision D:2008 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS40 |
| DSCC 84081 : F | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED ON ONE END ONLY |
| MIL-PRF-15733-34 Revision T:2015 | Filters and Capacitors, Radio Frequency Interference, Hermetically Sealed, Style FL90 |
| MIL-PRF-28861-2 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS20 |
| ASTM E 1161 : 2009 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| MIL-STD-202-212 Base Document:2015 | Method 212, Acceleration |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| NEMA MW 1000 : 2016 | MAGNET WIRE |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-220 Revision C:2009 | Method of Insertion Loss Measurement |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-305 Base Document:2015 | Method 305, Capacitance |
| MIL-STD-202-209 Base Document:2015 | Method 209, Radiographic Inspection |
| MIL-PRF-31033 Revision B:2011 | Capacitor, Fixed, Ceramic Dielectric, High Reliability, Discoidal, General Specification for |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| SAE AMS2418J | Plating, Copper |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-PRF-28861-3 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS30 |
| MIL-STD-202-107 Base Document : 2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-PRF-28861-6 Revision E:2010 | Filters and Capacitors, Radio Frequency/Electromagnetic Interference, Suppression, Nonhermetically Sealed, Style FS60 |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-PRF-28861-2 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS20 |
| MIL-PRF-28861-5 Revision C:2003 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS50 |
| MIL-STD-202-104 Base Document:2015 | Method 104, Immersion |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-PRF-28861-1 Revision E:2016 | Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Styles FS10 and FS11 |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-PRF-28861-12 Revision G:2012 | Filters, and Capacitors, Radio Frequency/Electromagnetic Interference, Suppression, Hermetically Sealed on One End Only, Style FS70 |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| MIL-PRF-28861-4 Revision D:2008 | Filters, Radio Frequency/Electromagnetic Interference Suppression, Hermetically Sealed, Style FS40 |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-112 Base Document:2015 | Test Method Standard Method 112, Seal |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.