MIL-PRF-32150 Revision B:2013
Current
The latest, up-to-date edition.
Static Automatic Bus Transfer (SABT) Switch on Surface and Submarine Naval Vessels
English
15-07-2013
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the Static Automatic Bus Transfer Switch (SABT) or the unit, for use on surface and submarine naval vessels.
| DevelopmentNote |
Supersedes A A 59194. (01/2016)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the Static Automatic Bus Transfer (SABT) Switch, herein referred to as the SABT (see 6.4.23) or the unit, or also referred to as a Solid State Automatic Bus Transfer (SSABT) Switch, for use on surface and submarine naval vessels. Requirements for Automatic Bus Transfer (ABT) Switches and Manual Bus Transfer (MBT) Switches are not covered in this specification. MIL-PRF-17773 specifies the requirements for ABTs and MBTs.
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL-DTL-16036 Revision M:2013 | Switchgear, Power, Low Voltage, Naval Shipboard |
| MIL-PRF-19207 Revision G:2013 | Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for |
| MIL E 2036 : D | ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-1686 Revision C:1995 | Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (S/S by ANSI/ESD S20.20) |
| MIL-PRF-19500-708 Revision C:2016 | Control-Display,Optoelectronic, Diode, Light Emitting, Solid State, Red, Numeric and Hexadecimal, with on Board Decoder/Driver, Encapsulated (through-Hole Package), Types 4N51, 4N52, 4N53,and 4N54, JAN, JANTX,and JANTXV |
| MIL-R-19523 Revision B:1990 | Relays, Control |
| MIL-STD-740-2 Base Document:1986 | Structureborne Vibratory Acceleration Measurements Acceptance Criteria of Shipboard Equipment |
| MIL-PRF-19500-519 Revision F:2016 | Light Emitting Diode, Red, Through-Hole Mountand Panel Mount Assembly, Clear and Diffused Lens, Types 1N6092, 1N6609, M19500/51901, M19500/51902, M19500/51903 and M19500/51904, Quality Levels JAN and JANTX |
| MIL-STD-1310 Revision H:2009 | Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| MIL-STD-1399-300 Revision B:2008 | Department of Defense Interface Standard Section 300B Electric Power, Alternating Current (S/S By MIL-STD-1399-300-1) |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| DOD-STD-1399-70-1 Base Document:1979 | Interface Standard for Shipboard Systems Section 070 - Part 1 D.C. Magnetic Field Environment (S/S by MIL-STD-1399-407) |
| MIL-STD-108 Revision E:1966 | Definitions of and Basic Requirements for Enclosures for Electric and Electronic Equipment |
| IEEE 1012-2012 | IEEE Standard for System and Software Verification and Validation |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| MIL-STD-1474 Revision E:2015 | Noise Limits |
| MIL-P-15024-5 Base Document:1971 | Plate, Identification |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-STD-1671 Base Document:1975 | SCHEMATIC WIRING DIAGRAM (EXTERNAL DC POWER CONNECTOR, AIRCRAFT) (NO S/S DOCUMENT) |
| MIL-STD-681 Revision F:2012 | Identification Coding and Application of Hookup and Lead Wire |
| MIL-PRF-19500-572 Revision D:2017 | Light Emitting Diode, Types 1N6493, 1N6494, 1N6495, 1N6500, 1N6501, and 1N6502, Quality Levels JAN and JANTX |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.