MIL-STD-1686 Revision C:1995
Current
The latest, up-to-date edition.
ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
English
Paragraph
Foreword
1 Scope
1.1 Purpose
1.2 Scope
1.3 Application
2 Applicable documents
2.1 General
2.2 Government documents
2.2.1 Specifications, standards, and handbooks
2.3 Non-Government publications
2.4 Order of precedence
3 Definitions
4 General requirements
4.1 General
4.4.1 Tailoring of this standard
5 Detailed requirements
5.1 ESD control program plan
5.1.1 Subcontractor control
5.2 Classification of ESDS parts, assemblies and
equipment
5.2.1 Part ESD sensitivity classes and classification
5.2.1.1 HBM sensitivity classification
5.2.1.2 MM sensitivity classification
5.2.1.3 CDM sensitivity classification
5.2.2 Assembly/Equipment classification and design
hardening
5.2.2.1 Direct contact, non-operating assembly, 2,000
V body/finger or hand/metal HBM tests
5.2.2.2 Direct contact, operating equipment, 4,000 V
hand/metal HBM test
5.2.2.3 Indirect contact, operating equipment, 4,000 V
furniture model test
5.3 Protected areas
5.4 Handling procedures
5.5 Protective covering
5.6 Training
5.7 Marking of hardware
5.7.1 Assemblies
5.7.2 Equipment
5.8 Packaging
5.9 Quality assurance reviews and audits.
5.10 Failure analysis
6 Notes
6.1 Intended use
6.2 Issue of DoDISS
6.3 Subject term (key word) listing
6.4 Changes from previous issue
FIGURE
1 Tailoring flow chart
2 Electrostatic discharge symbol
TABLE
I Classes of ESDS parts
II ESD test standards/methods for classification
of ESDS parts
III ESD assembly/equipment design hardening goals
IV ESD test standards/methods for hardening of
ESDS assembly/equipment.
Establishes an ESD control program minimizing the effects of ESD on various components, assemblies, and equipment. May be tailored for various types of acquisitions. Coverage includes applicable documents, protected areas, sensitivity classification, handling procedures, packaging, documentation, internal quality reporting, failure analysis, and preparation of internal quality records. Also gives detailed tables and diagrams.
Committee |
AREA RELI
|
DevelopmentNote |
Supersedes DOD STD 1686 (07/2004)
|
DocumentType |
Standard
|
Pages |
19
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
ISO 20188:2018 | Space systems — Product assurance requirements for commercial satellites |
MIL-R-83726-24 Revision M:2016 | RELAYS, SOLID STATE, TIME DELAY (ON OPERATE), TRACK MOUNTED, TYPE 1, CLASS C, SPST, 150 MILLIAMPERES, FIXED TIME, 50 MILLISECONDS TO 500 SECONDS |
MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
MIL-PRF-32272 Revision A:2016 | INTEGRATED POWER MANAGEMENT CENTER (IPMC) |
MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
MIL-I-29589 Base Document:1991 | INTERROGATOR SET, AN/UPX-24(V) |
MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
MIL-STD-750-3 Base Document:2012 | Transistor Electrical Test Methods for Semiconductor Devices Part 3: Test Methods 3000 Through 3999 |
MIL-STD-989 Base Document:1991 | CERTIFICATION REQUIREMENTS FOR JAN SEMICONDUCTOR DEVICES |
MIL-STD-750 Revision F:2011 | TEST METHODS FOR SEMICONDUCTOR DEVICES |
MIL-DTL-19491 Revision J:2014 | SEMICONDUCTOR DEVICES, PACKAGING OF |
MIL-R-83726-22 Revision F:2008 | Relays, Solid State, Repeat Cycle Timer, Type IV, Class C, SPST, 250 Milliamperes (No S/S Document) |
MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
MIL-PRF-32150 Revision B:2013 | STATIC AUTOMATIC BUS TRANSFER SWITCH (SABT) ON SURFACE AND SUBMARINE NAVAL VESSELS |
MIL-PRF-17773 Revision D:2015 | SWITCH, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC |
MIL-DTL-17361 Revision G:2006 | CIRCUIT BREAKER TYPES AQB/NQB, AIR, ELECTRIC, LOW VOLTAGE, INSULATED HOUSING (SHIPBOARD USE), GENERAL SPECIFICATION FOR |
MIL-DTL-32485 Base Document:2013 | CIRCUIT BREAKERS, VACUUM TYPE (VCB), ELECTRIC POWER, MEDIUM VOLTAGE, ALTERNATING CURRENT, DRAW-OUT REMOVABLE CONSTRUCTION, WITHOUT INTERNAL OVERCURRENT PROTECTION |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
MIL-STD-2000 Revision A:1991 | STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
MIL I 38535 : B (1) | INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR |
MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
A-A-58047 Revision D:2016 | SIGNAL GENERATOR |
MIL-DTL-24784 Revision D:2017 | MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS, GENERAL SPECIFICATION FOR |
MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
MIL-PRF-28800 Revision F:1996 | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
MIL R 83726/20 : C (2) | RELAY, SOLID STATE, TIME DELAY (ON OPERATE) TYPE 1, CLASS C, SPST, 250 MILLIAMPERES, FIXED TIME, .05 TO 500 SECONDS |
DSCC 13018 : A | OSCILLATOR, CRYSTAL CONTROLLED, 3.3 VOLT, ENABLE/TRI-STATE, 32.768 KHZ TO 160 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
BS EN 61340-5-2:2001 | Electrostatics. Protection of electronic devices from electrostatic phenomena User guide |
MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
MIL-HDBK-338 Revision B:1998 | ELECTRONIC RELIABILITY DESIGN HANDBOOK |
MIL-STD-40051-2 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (TMS) |
MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
MIL-STD-3031 Revision A:2011 | ARMY BUSINESS RULES FOR S1000D: INTERNATIONAL SPECIFICATION FOR TECHNICAL PUBLICATIONS UTILIZING A COMMON SOURCE DATA BASE |
MIL D 83532 : A (3) SUPP 1 | DELAY LINES, ACTIVE |
SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
SAE AS 5363 : 2016 | ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR |
NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
NASA JSC 08080-2 : 2015 | JSC DESIGN AND PROCEDURAL STANDARDS |
MIL-STD-750-1 Revision A:2015 | Environmental Test Methods for Semiconductor Devices Part 1: Test Methods 1000 Through 1999 |
NASA JSC 20793 : 2017 | CREWED SPACE VEHICLE BATTERY SAFETY REQUIREMENTS |
IPC A 630 : 0 | ACCEPTABILITY STANDARD FOR MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES |
MIL-E-24762 Base Document:1991 | ENCLOSURES FOR ELECTRONIC EQUIPMENT, SURVIVABLE, NAVAL SHIPBOARD USE |
NASA MSFC SPEC 1198 : 1960 | SCREENING REQUIREMENTS FOR NONSTANDARD ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS |
DI-QCIC-81794 Base Document:2009 | QUALITY ASSURANCE PROGRAM PLAN |
MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
MIL-R-83726-19 Revision H:2016 | RELAYS, HYBRID, TIME DELAY (ON OPERATE), TRACK MOUNTED, TYPE 1, CLASS B, 10 AMPERES, 2PDT, HERMETICALLY SEALED, FIXED TIME, 0.1 TO 300 SECONDS |
MIL-N-49098 Revision A:1990 | NAVIGATIONAL SET, DOPPLER AN/ASN-128()(XE-2) |
MIL-HDBK-522 Revision A:2016 | GUIDELINES FOR INSPECTION OF AIRCRAFT ELECTRICAL WIRING INTERCONNECT SYSTEMS |
NASA JSC 66552 : 2013 | ELECTROSTATIC DISCHARGE CONTROL REQUIREMENTS FOR THE PROTECTION OF ELECTRONIC COMPONENTS AND ASSEMBLIES |
MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
MIL R 39032 : D | RESISTOR, PACKAGING OF |
MIL-PRF-83726-21 Revision H:2015 | RELAY, SOLID-STATE, TIME DELAY (ON OPERATE), TYPE 1, CLASS C, SPST, 250 MILLIAMPERES, VARIABLE TIME, 0.05 TO 500 SECONDS |
17/30318744 DC : 0 | BS ISO 20188 - SPACE SYSTEMS - PRODUCT ASSURANCE REQUIREMENTS FOR COMMERCIAL SATELLITES |
MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-HDBK-1222 Revision F:2015 | GUIDE TO THE GENERAL STYLE AND FORMAT OF U.S. ARMY WORK PACKAGE TECHNICAL MANUALS |
MIL-R-83726-18 Revision H:2016 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TRACK MOUNTED, TYPE 2A, CLASS B, 10 AMPERES, 2PDT, HERMETICALLY SEALED, FIXED TIME, 0.1 TO 300 SECONDS |
MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
MIL-R-83726-27 Revision M:2016 | Relays, Hybrid, Time Delay, Voltage Sensitive, Delay on Drop-Out, Class A, Type V, Hermetically Sealed (Potted), SPDT, 2 Ampere, Track Mounted (No S/S Document) |
MIL R 83726/29 : C | RELAY, TIME DELAY, DELAY ON RELEASE, CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT,10 AMPERES, FIXED TIME, 0.1 TO 500 SECONDS |
ARINC 654 : 1994 | ENVIRONMENTAL DESIGN GUIDELINES FOR INTEGRATED MODULAR AVIONICS PACKAGING AND INTERFACES |
SAE AS 4461 : 2016 | ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERING WIRE AND CABLE TERMINATION IN AEROSPACE VEHICLES |
DSCC 05013 : B | OSCILLATOR, CRYSTAL CONTROLLED, 3.3 VOLT, ENABLE/TRI-STATE, 312 KHZ TO 170 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
DSCC 05014 : B | OSCILLATOR, CRYSTAL CONTROLLED, 5 VOLT, ENABLE/TRI-STATE, 312 KHZ TO 120 MHZ, TTL AND CMOS COMPATIBLE, SURFACE MOUNT |
MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
MIL-STD-40051 Revision B:2003 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS |
MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
MIL-R-29583 Base Document:1992 | RADIO SET |
MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
MIL-STD-40051-1 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMS) |
MIL-M-63038 Revision D:1993 | MANUAL. TECHNICAL, ORGANIZATION OR AVIATION UNIT, DIRECT SUPPORT OR AVIATION INTERMEDIATE, AND GENERAL SUPPORT MAINTENANCE |
MIL R 83726/28 : C | RELAY, TIME DELAY ON OPERATE, CLASS B, TYPE 1, HERMETICALLY SEALED, DPDT, 10 AMPERES, FIXED TIME, 0.1 TO 500 SECONDS |
EIA 836 CD : B2010(R2015) | CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY |
MIL-R-83726-7 Revision G:2015 | RELAYS, HYBRID, TIME DELAY, ON PICKUP, TYPE 1, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.06 TO 300 SECONDS |
NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
MIL R 83726/21 : D | RELAYS, SOLID STATE, TIME DELAY (ON OPERATE) TYPE 1, CLASS C, SPST 250 MILLIAMPERES, VARIABLE TIME, .05 TO 500 SECONDS |
SAE AIR 4728 : 2013 | REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS) |
ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
DOD HDBK 263 : LATEST | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)METRIC |
MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
MIL-STD-785 Revision B:1980 | RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.