MIL-PRF-46010 Revision H:2013
Current
Current
The latest, up-to-date edition.
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Available format(s)
PDF
Language(s)
English
Published date
13-11-2013
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - INSTRUCTIONS FOR APPLYING LUBRICANT,
SOLID-FILM, HEAT-CURED, CORROSION INHIBITING
Specifies the requirements for a corrosion inhibiting heat cured solid film lubricant that is intended to reduce wear and prevent galling, corrosion, and seizure of metals.
| DevelopmentNote |
Supersedes MIL L 0046010 (E) & MIL L 46010 (D). (09/2000)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification establishes the requirements for a corrosion inhibiting heat cured solid film lubricant that is intended to reduce wear and prevent galling, corrosion, and seizure of metals (see 6.1). For aerospace component applications see 6.10 Notes.
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| MS27057 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27385 Revision C:2013 | Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27382 Revision C:2013 | Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut |
| MS27381 Revision C:2013 | Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27060 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| MIL-DTL-45916 Revision C:2014 | Insert, Screw Thread - Thread Cutting and Thread Forming |
| MS27383 Revision C:2014 | Adapter Assembly, Flareless, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27056 Revision E:2013 | Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| AN818 Revision 20:2010 | Nut, Tube Coupling, Short |
| MS27387 Revision D:2013 | Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut |
| PREN 4265 : 200P2 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL IN CORROSION RESISTING STEEL - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6057 : 200P1 | AEROSPACE SERIES - ROD-ENDS, WITH BEARING PER EN4265 IN CORROSION RESISTING STEEL, INTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-STD-2088 Revision B:2007 | Bomb Rack Unit (BRU), Single Store, Aircraft |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| A-A-59590 Revision D:2014 | Holder, Electrical Card, Wedge Retainers, 3 Piece, for Cold Plate Applications, General Requirements for |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| A-A-59789 Revision B:2014 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, General Requirements for |
| MS27082 Revision E:2014 | Elbow, Nipple End, Swivel Flange to Hose-90 Degrees |
| BS EN 4265:2013 | Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series |
| I.S. EN 6129:2016 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE |
| MS27055 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27061 Revision D:2013 | Nipple Subassembly, Flared, Straight - with Swivel Nut |
| MS27072 Revision F:2013 | Wire, Retainer |
| A-A-59950 Base Document:2014 | Holder, Electrical Card, Wedge Retainers, 7 Body, for Cold Plate Applications, General Requirements for |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MS27389 Revision D:2014 | Elbow Subassembly, Flareless, 45 Degrees Forged, Swivel Nut |
| MS27067 Revision D:2013 | Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut |
| MS27624 Revision B:2009 | Union, Nipple |
| I.S. EN 4266:2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| MIL-DTL-45932 Revision A:2015 | Insert, Screw Thread, Thin Wall, Locked in: General Specification for |
| MS27064 Revision E:2014 | Elbow Subassembly, Swivel Flange, 45 Degrees |
| MS27075 Revision D:2013 | Nipple, Flared, Tube to Hose - Swivel Nut |
| MS27071 Revision D:2013 | Union, Nipple |
| MS27625 Revision D:2018 | Wire, Retainer |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MS27070 Revision E:2013 | Sleeve, Hose Coupling |
| MS27068 Revision D:2013 | Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut |
| BS EN 4266:2013 | Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series |
| MS27390 Revision C:2013 | Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut |
| MS27058 Revision E:2013 | Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose |
| MS27384 Revision C:2014 | Adapter Assembly, Flareless, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| 09/30205027 DC : 0 | BS EN 4265 - AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL IN CORROSION RESISTING STEEL, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| MS27626 Revision B:2009 | Nipple, Flared, Tube to Hose-Swivel Nut |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-DTL-82889 Revision A:2004 | Detonating Cord Assembly (DCA) |
| MS27065 Revision F:2013 | Elbow Subassembly, Flared, 90 Degrees, Swivel Nut |
| MS27062 Revision D:2013 | Nipple Subassembly, Straight, Swivel Flange |
| MS27635 Revision C:2009 | Nipple, Flareless, Tube to Hose, Swivel Nut (No S/S Document) |
| NASA STD 5017 : 2015 | DESIGN AND DEVELOPMENT REQUIREMENTS FOR MECHANISMS |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| EN 6128:2017 | Aerospace series - Blind bolt, 100° flush head, high strength |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA MSFC STD 557 : 2012 | THREADED FASTENERS, TITANIUM ALLOYS, USAGE CRITERIA FOR LAUNCH VEHICLES AND SPACECRAFT APPLICATIONS |
| MIL-DTL-45910 Revision D:2015 | Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for |
| MS27391 Revision F:2013 | Nipple, Flareless, Tube to Hose - Swivel Nut |
| 15/30331968 DC : 0 | BS PREN 6046 - AEROSPACE SERIES - BEARING SPHERICAL PLAIN METAL TO METAL IN CORROSION RESISTING STEEL - NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| MIL-DTL-26500 Revision G:2011 | Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting or Hermetically Sealed, General Specification for |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| MS27063 Revision F:2013 | Elbow Subassembly, Flared, 45 Degrees, Swivel Nut |
| MS27053 Revision E:2013 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| PREN 6097 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, METAL TO METAL, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| MS27394 Revision C:2014 | Elbow, Flareless, Tube to Hose - 90 Degrees Swivel Nut |
| SAE AS12500 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies |
| BS EN 6129:2016 | Aerospace series. Blind bolt, protruding head, high strength, pulltype |
| EN 4265:2013 | Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series |
| EN 6094:2016 | Aerospace series - Washer, spring, countersunk |
| EN 6092:2016 | Aerospace series - Receptacle, floating, double lug |
| EN 4266:2013 | Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series |
| MS27066 Revision F:2013 | Elbow Subassembly, Swivel Flange, 90 Degrees |
| MS27388 Revision D:2014 | Elbow Subassembly, Flareless, 90 Degrees, Swivel Nut |
| MS27386 Revision C:2013 | Nipple Subassembly, Flareless, Straight - with Swivel Nut |
| MS27054 Revision E:2013 | Adapter Assembly, Straight, Swivel Flange to Hose |
| MS27069 Revision H:2017 | Socket, Hose Coupling |
| MS27059 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| 09/30205253 DC : 0 | BS EN 4266 - AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6122 : 200P1 | AEROSPACE SERIES - BLIND BOLT, 130 DEGREES FLUSH HEAD, HIGH STRENGTH, PREFERABLE IN COMPOSITE APPLICATION |
| MS27395 Revision D:2014 | Elbow, Flareless, Tube to Hose - 45 Degrees Swivel Nut |
| MS27084 Revision D:2014 | Elbow, Nipple End, Swivel Flange to Hose - 45 Degrees |
| PREN 4266 : 200P2 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| SAE AMS2487B | Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum |
| I.S. EN 6128:2017 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH |
| SAE MA4623 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| I.S. EN 4265:2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL IN CORROSION RESISTING STEEL - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 6128:2017 | Aerospace series. Blind bolt, 100° flush head, high strength |
| PREN 6098 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 6097 IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6127 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES REDUCED FLUSH HEAD, HIGH STRENGTH |
| PREN 6055 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4265 IN CORROSION RESISTING STEEL, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6128 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES FLUSH HEAD, HIGH STRENGTH |
| PREN 6129 : 200P1 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| MIL-PRF-372 Revision E:2013 | Cleaning Compound, Solvent (for Bore of Weapons) |
| MIL-PRF-46170 Revision E:2013 | Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544 |
| MIL-PRF-63460 Revision F:2017 | Cleaner, Lubricant, and Preservative for Weapons and Weapon Systems |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| MIL-DTL-16232 Revision G:2000 | Phosphate Coating, Heavy, Manganese or Zinc Base |
| MIL-F-495 Revision E:1988 | FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
| ASTM F 22 : 2013 : REDLINE | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM D 1732 : 2003 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| VV-D-1078 Revision B:1983 | Damping Fluid, Silicone Base (Dimethyl Polysiloxane) |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM D 1125 : 2014 : REDLINE | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM A 967/A967M : 2017 : REDLINE | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| MIL-PRF-14107 Revision D:2000 | Lubricating Oil, Weapons, Low Temperature |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.