MIL-STD-171 Revision F:2011
Current
The latest, up-to-date edition.
FINISHING OF METAL AND WOOD SURFACES
English
FOREWORD
1. SCOPE
2. REFERENCED DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAIL REQUIREMENTS
6. NOTES
APPENDIX A
Specifies and updates general finish codes and serves as a general guide to the selection of suitable materials, procedures, and system for cleaning, plating, painting and otherwise finishing of metal and wood surfaces.
Committee |
AREA MFFP
|
DocumentType |
Standard
|
Pages |
65
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
MIL-R-71126 Base Document:1992 | RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24 |
MIL-P-70786 Base Document:1989 | PALLET, STANDARD METAL |
MIL P 51529 : 0 | PACKAGING OF DECONTAMINATING AGENT |
MIL N 49064 : D | NIGHT VISION SIGHT, CREW SERVED WEAPON, AN/TVS-5 |
MIL-W-13855 Revision D:1973 | WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR |
DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
MIL-M-15071 Revision H:1991 | MANUAL, TECHNICAL, EQUIPMENTS AND SYSTEMS CONTENT REQUIREMENTS FOR |
MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
MIL-C-11009 Revision B:1968 | CLIP, CARTRIDGE, CARBINE, CAL. .30 |
MIL-R-22628 Base Document:1964 | RESIN, CASTING, EPOXY, ALUMINUM FILLED |
MIL-G-51491 Revision A:1986 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A4 |
MIL V 62547 : A (1) | VALVE AND CYLINDER ASSEMBLIES, HALON |
MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
MIL-F-46220 Revision A:1962 | FUZE, PD, M525A1E1, HEAD ASSEMBLY FOR |
MIL-C-10632 Revision C:1973 | COVERS AND CASES, TEXTILE, ARMY EQUIPMENT, GENERAL SPECIFICATION FOR |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
MIL-R-47196 Revision A:1977 | RIVETS, BUCK TYPE, PREPARATION FOR AN INSTALLATION OF |
MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
MIL L 60427 : B | LOCKWIRE, FOR 2.75 INCH ROCKET MOTOR ALL MARKS AND MODS |
MIL-G-82932 Base Document:1994 | GAS GENERATOR, M17, REMANUFACTURED ASSEMBLY |
MIL-M-63287 Base Document:1979 | MINE, ANTIPERSONNEL, XM74 (M74) METAL PARTS FOR |
MIL C 87104 : 0 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL-F-45060 Revision D:1975 | FUZE, MINE, COMBINATION M605, PARTS FOR |
MIL D 12468 : C NOTICE 1 | DECONTAMINATING AGENT, STB |
MIL-C-11020 Revision B:1966 | CHESTS AND CASES, METAL, GENERAL SPECIFICATION FOR |
MIL P 49151 : C | POWER ADAPTER ASSEMBLY VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V) |
MIL-C-70842 Base Document:1994 | CONTAINER, SHIPPING AND STORAGE, CARTRIDGE, 40 MM, PA120 - GENERAL SPECIFICATION FOR |
MIL L 49367 : B | LENS ASSEMBLY, OBJECTIVE, 155MM AN/TVS-5 |
MIL-L-50205 Base Document:1968 | LINER, CUP-FOR WARHEAD, 2.75 INCH ROCKET, M151 AND XM229 |
MIL-A-49425 Base Document:1989 | AVIATORS NIGHT VISION IMAGING SYSTEM AN/AVS-6(V)1, AN/AVS-6(V)2 |
MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
MIL-R-48233 Revision A:1980 | Rod, Stabilizing, Coated for 2.75 Inch Rocket Motor MK4/MK40and Mods |
MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
MIL-E-11991 Revision E:1983 | ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR |
MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
MIL-S-51422 Revision B:1987 | SHELTER AND ENTRANCE ASSEMBLY - CHEMICAL-BIOLOGICAL SHELTER SYSTEM: INFLATABLE |
SAE ARP 81490 : 2016 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
MIL-S-48142 Base Document:1973 | SIGNAL, ILLUMINATION, GROUND, XM199 RED, XM201 WHITE, XM200 GREEN AND XM198 AMBER PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
MIL-S-48377 Base Document:1974 | SIGNAL, SMOKE, GROUND XM202 THRU XM205 RED, YELLOW, GREEN AND WHITE PARTS FOR AND LOADING ASSEMBLING AND PACKING |
MIL-A-70753 Base Document:1988 | ADAPTERS, PALLET, WOODEN, FOR METAL CONTAINER FOR 105 MM AND 120 MM TANK AMMUNITION |
MIL-P-63514 Revision A:1986 | PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY |
MIL S 22885/108 : B | SWITCHES, PUSHBUTTON, ILLUMINATED, 4-LAMP, 0.750 SQUARE, SPDT, DPDT, 4PDT SILVER CONTACTS - 2 CIRCUIT (5 AMPERES) OR SPDT (7.5 AMPERES); GOLD CONTACTS - LOW LEVEL TO 1 AMPERE, SUNLIGHT READABLE DISPLAY (DRIPPROOF, WATERTIGHT, SPLASHPROOF, EMI/RFI SHIELDING, HIGH IMPACT SHOCK RESISTANT, COMMON TERMINATION SYSTEM, NIGHT VISION GOGGLE COMPATIBLE |
MIL-DTL-2439 Revision G:2014 | CONTAINER, AMMUNITION, FIBER, SPIRALLY WOUND |
MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
MIL-S-62544 Base Document:1988 | SUPPRESSION FIRE, BROMOTRIFLUOROMETHANE, HALON 1301 SYSTEMS |
MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
MIL-C-70998 Base Document:1992 | CONTAINER, SHIPPING AND STORAGE, CARTRIDGE, 25 MM, PA125 - GENERAL SPECIFICATION FOR |
MIL-T-60699 Base Document:1969 | THRUSTER, CARTRIDGE ACTUATED, M7, REMANUFACTURED METAL PARTS ASSEMBLY |
MIL-G-0051066 Revision D:1982 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A3 |
MIL M 62545 : B | MODULE, STANDARD ELECTRONIC CONTROL |
MIL L 49147 : C | LENS ASSEMBLY, EYEPIECE VIEWER, DRIVERS' NIGHT VISION, AN/VVS-2(V) |
MIL N 49063 : D | NIGHT VISION SIGHT, INDIVIDUAL SERVED WEAPON, AN/PVS-4 |
MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
MIL S 62546 : A | SENSOR, FIRE, OPTICAL |
MIL-C-2440 Revision F:1992 | CONTAINER, METAL, FOR PROPELLING CHARGE |
NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
SAE AS 1297 : 2008(S2014) | REDUCERS, PNEUMATIC PRESSURE, MISSILE |
NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
DOD C 63976 : 0 | CASE, CARTRIDGE, 30MM, AMMUNITION FOR M788 M789 AND M799 SERIES OF 30 MM, AMMUNITION |
MIL-W-36775 Revision A:1979 | WET BULB GLOBE TEMPERATURE KIT |
MIL-T-81587 Revision A:1971 | TIMER ASSEMBLY RAIN REPELLENT |
MIL F 50907 : NOTICE 1 | FIRING DEVICE, ANTI PERSONNEL MINE, XM 123 PARTS & ASSEMBLY |
MIL-DTL-62545 Revision E:2013 | Module, Standard Electronic Control |
MIL-A-71180 Base Document:1993 | ADAPTER, METAL PALLET |
NASA KSC F 124 : 1994 | SPECIFICATION FOR FITTINGS, FLARED TUBE |
MIL L 49366 : B | LENS ASSEMBLY, OBJECTIVE, 95MM AN/PVS-4 |
MIL-T-45917 Revision A:1974 | TARGET MECHANISM, NIGHT FIRING, SMALL ARMS, M40 |
MIL-R-50858 Revision C:1979 | ROCKET, PRACTICE, 35MM SUBCALIBER, M73 PARTS FOR LOADING & ASSEMBLING |
MIL-G-46382 Base Document:1963 | GAGE, SNAP, THREAD ROLL |
MIL-STD-1947 Base Document:1985 | ULTRASONIC WELDING OF ALUMINUM AND ALUMINUM ALLOY MATERIALS |
MIL-A-46655 Revision B:1965 | ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157 PARTS FOR AND PACKING |
MIL-PRF-22885-108 Revision H:2017 | SWITCHES, PUSHBUTTON, ILLUMINATED, 4-LAMP REPLACEABLE INCANDESCENT OR NON-REPLACEABLE LIGHT EMITTING DIODE (LED), 0.750 SQUARE, SPDT, DPDT, 4PDT SILVER CONTACTS - 2 CIRCUIT (5 AMPERES) OR SPDT (7.5 AMPERES); GOLD CONTACTS - LOW LEVEL TO 1 AMPERE, OPTIONAL ELECTRONIC COMPONENTS, SUNLIGHT READABLE DISPLAY (DRIPPROOF, WATERTIGHT, SPLASHPROOF, EMI/RFI SHIELDING, HIGH IMPACT SHOCK |
MIL-F-47076 Revision A:1990 | FILM, POLYETHYLENE TEREPHTHALATE, METALLIZED |
MIL-A-71179 Base Document:1993 | ADAPTER, METAL PALLET FOR STINGER WEAPON SYSTEM |
MIL E 49149 : C | ELECTRONIC CONTROL ASSEMBLY VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V) |
MS27614 Revision F:2009 | CONNECTORS, ELECTRICAL, RECEPTACLE, 'D' HOLE, JAM NUT MOUNT, FIREWALL SERIES |
MIL-G-49313 Base Document:1989 | GOGGLES, NIGHT VISION |
MIL-DTL-70951 Revision A:2007 | PALLET, FIELD ARTILLERY PROJECTILE |
MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
MIL-STD-403 Revision C:1992 | PREPARATION FOR AND INSTALLATION OF RIVETS AND SCREWS, ROCKET AND MISSILE STRUCTURES |
MIL-A-52818 Base Document:1974 | ANCHOR, GUY: SHIELD, EXPANSION |
MIL T 49316 : LATEST | TEST SET, ELECTRONIC SYSTEMS |
MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
MS27615 Revision F:2009 | CONNECTORS, ELECTRICAL, PLUG, RATCHET LOCK COUPLING, FIREWALL SERIES |
MIL PRF 62547 : B | VALVE AND CYLINDER ASSEMBLIES, HALON 1301 |
MIL-STD-1512 Base Document:1972 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS |
MIL-S-48403 Base Document:1973 | STEEL SHEET, HOT-DIP, ZINC-COATED (GALVANIZED), MINIMIZED SPANGEL, FOR AUTOMOTIVE VEHICLE BODY USE |
MIL L 49434 : NOTICE 1 | LIGHT, AIMING, INFRARED AN/PAQ-4 |
MIL-G-49312 Base Document:1989 | GOGGLES, NIGHT VISION AN/PVS-7A |
MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
MIL-C-42066 Revision A:2000 | CARRIER, LITTER, WHEELED |
MIL-R-46509 Revision A:1982 | ROCKET MOTOR, XM30, METAL PARTS FOR |
MIL-K-70606 Base Document:1988 | KNIFE, BAYONET, MULTIPURPOSE, M9 WITH SCABBARD |
MIL-A-37234 Base Document:1977 | APPARATUS, ANAEROBIC CULTURE |
MIL-F-60020 Base Document:1964 | FUZE, MINE, COMBINATION M10A2, PARTS FOR |
MIL-C-48666 Revision B:1993 | CANISTER ASSEMBLY, M87 LOADING, ASSEMBLING AND PACKING OF |
MIL-T-60530 Revision A:1971 | TECHNICAL DATA PACKAGE FOR AMC MATERIAL |
MIL-DTL-62547 Revision D:2010 | VALVE AND CYLINDER ASSEMBLIES, HALON 1301 |
MIL-D-50720 Base Document:1971 | DUMMY CARTRIDGE 20 MILLIMETER PLASTIC XM254 |
MIL-C-45404 Revision A:1972 | CLIP, CARTRIDGE, 7.62MM, 5 ROUND |
MIL-L-49427 Base Document:1989 | LENS ASSEMBLY, EYEPIECE FOR AVIATORS NIGHT VISION IMAGING SYSTEM |
MIL-T-81490 Revision A:1991 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
MIL-DTL-5003 Revision E:2010 | FLOODLIGHT SET, ELECTRIC, TRIPOD-MOUNTED, FOUR 150-WATT FLOODLIGHTS |
NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
MIL-PRF-32076 Base Document:2000 | UNITIZATION OF AMMUNITION |
MIL-T-13559 Revision B:1973 | TARGET EQUIPMENT |
MIL C 70478 : 0 | CONTAINER, AMMUNITION, METAL FOR CARTRIDGE, 120MM, TANK AMMUNITION |
MIL T 49318 : 1991-11-21 | TEST SET, ELECTRONIC SYSTEMS |
MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED |
MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
MIL-F-13424 Revision K:1976 | FUSE, HAND GRENADE, M204A2, M206A2 AND PRACTICE M205A2 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
MIL L 49148 : C | LENS ASSEMBLY, OBJECTIVE VIEWER, DRIVERS NIGHT VISION, AN/VVS-2(V) |
MIL L 49368 : B | LENS ASSEMBLY, EYEPIECE, AN/PVS-4 & AN/TVS-5 |
MIL-L-49426 Base Document:1989 | LENS ASSEMBLY, OBJECTIVE FOR AVIATORS NIGHT VISION IMAGING SYSTEM |
A-A-3003 Revision A:2004 | LACQUER, SPRAYING, CLEAR AND PIGMENTED FOR INTERIOR USE |
MIL P 14105 : D | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
SAE AMS S 8802 : 2015 | SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
ASTM D 3955 : 2013 : REDLINE | Standard Specification for Electrical Insulating Varnishes |
ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
MIL-HDBK-2036 Base Document:1999 | PREPARATION OF ELECTRONIC EQUIPMENT SPECIFICATIONS |
SAE AMS QQ C 320 : 2000 | CHROMIUM PLATING (ELECTRODEPOSITED) |
MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
SAE AMS P 38336 : 2013 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
MIL-I-13857 Revision B:1983 | IMPREGNATION OF METAL CASTING |
ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
A-A-59146 Revision B:2014 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
MIL-P-18317 Base Document:1954 | PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
MIL-PRF-3150 Revision E:2008 | LUBRICATING OIL, PRESERVATIVE, MEDIUM |
MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
MIL-PRF-26915 Revision D:1997 | PRIMER COATING, FOR STEEL SURFACES |
MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
SAE AMS 2418 : 2017 | PLATING, COPPER |
MIL-F-495 Revision E:1988 | FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
MIL-DTL-450 Revision D:2011 | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
MIL-R-46085 Revision B:1984 | RHODIUM PLATING, ELECTRODEPOSITED |
MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
SAE J 1959 : 2016 | CORROSION PREVENTIVE COMPOUND, UNDERBODY VEHICLE CORROSION PROTECTION |
MIL C 20218 : P | CHROMIUM PLATING, ELECTRODEPOSITED, POROUS |
ASTM D 1732 : 2003 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
ASTM D 4080 : 2015 : REDLINE | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
MIL-DTL-14538 Revision D:1999 | CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
SAE AMS 2423 : 2015 | PLATING, NICKEL, HARD DEPOSIT |
ASTM D 360 : 2012 | Standard Specification for Shellac Varnishes |
MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
SAE AMS C 81562 : 1998 | COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
MIL-PRF-4556 Revision F:1998 | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
MIL-C-8507 Revision D:1963 | Coating, Wash Primer (Pretreatment) for Metals, Application of (for Aeronautical Use) |
SAE AMS 2444 : 2000 | COATING, TITANIUM NITRIDE, PHYSICAL VAPOR DEPOSITION |
MIL-STD-865 Revision D:2007 | SELECTIVE, BRUSH PLATING, ELECTRO-DESPOSITION |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
SAE AMS 2403 : 2015 | PLATING, NICKEL, GENERAL PURPOSE |
SAE AMS C 8837 : 2015 | COATING, CADMIUM (VACUUM DEPOSITED) |
MIL-PRF-46147 Revision D:2008 | LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING |
TT-F-325 Revision A:1965 | FILLER, ENGRAVING, STAMPED MARKING |
MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
A-A-59166 Revision A:2014 | COATING COMPOUND, NONSLIP (FOR WALKWAYS) |
MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
MIL-L-13808 Revision B:1975 | LEAD PLATING (ELECTRODEPOSITED) |
MIL-HDBK-205 Revision A:1985 | Phosphate and Black Oxide Coating of Ferrous Metals |
TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
MIL-PRF-3043 Revision C:1998 | RESIN COATING, PERMANENT, FOR ENGINE COMPONENTS AND METAL PARTS |
SAE AMS M 3171 : 1998 | MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |
MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.