MIL-PRF-46170 Revision E:2013
Current
The latest, up-to-date edition.
Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544
30-05-2013
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for one type of synthetic hydrocarbon base hydraulic fluid for use in the -40 degrees C to 200 degrees C temperature range in recoil mechanisms and ground vehicle and equipment hydraulic systems.
| DevelopmentNote |
Supersedes MIL H 46170 (B). (06/2001) E NOTICE 1 - Notice of Validation. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
NEW CHILD NOT 1 2018 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for one type of synthetic hydrocarbon base hydraulic fluid (see 6.1) for use in the -40 degrees C to 200 degrees C temperature range in recoil mechanisms and ground vehicle and equipment hydraulic systems. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components.
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| SAE J1776_201402 | Marine Vehicles - Hydraulic System Pumps and Motors - Design and Specification Guide |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| MIL-DTL-45360 Revision J:2016 | Carriers, Personnel, Full-Tracked, Armored: M113A2, and M113A3; Mortars, Self-Propelled: M106A2 (107MM), M125A2 (81MM) and M1064, M1064A3 (120MM); Smoke Generators: M1059, M1059A3 and M58; Processing for Storage and Shipment of |
| MIL-DTL-62366 Revision D:2010 | Ring Assemblies, Electrical Contact |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| SAE AS83461/2B | STRAIGHT THREAD TUBE FITTING BOSS O-RING MOLDED FROM AMS-P-83461 RUBBER |
| SAE ARP5796 | Flight Critical Control Valves, Military Aircraft |
| MIL-PRF-46010 Revision H:2013 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738 |
| MIL-PRF-46147 Revision D:2008 | Lubricant, Solid Film, Air Cured, Corrosion Inhibiting |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| SAE AS83461/1B | M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| MIL-DTL-62421 Revision A:2009 | Control, Unit, Electronic, Digital |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| SAE AIR4543C | Aerospace Hydraulics and Actuation Lessons Learned |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| ASTM D 4898 : 2016 : REDLINE | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| ASTM D 6547 : 2016 : REDLINE | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| ASTM D 972 : 2016 : REDLINE | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| SAE AMS3217/2C | Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75 |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| ASTM D 5306 : 1992 : R2018 | Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| ASTM E 659 : 2015 : REDLINE | Standard Test Method for Autoignition Temperature of Chemicals |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.