MIL-PRF-83536 Revision F:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Relays, Electromagnetic, Established Reliability, General Specificationfor
Available format(s)
PDF
Published date
08-09-2017
Publisher
Superseded date
30-04-2021
Superseded by
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for electromagnetic, hermetically sealed relays for use in aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support equipment.
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers the general requirements for electromagnetic, hermetically sealed relays for use in aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 25 amperes alternating current (ac) or direct current (dc). Specification sheets (see 3.1) specifying requirements for 25 ampere relays are for relays that have a maximum load rating of 25 amperes for resistive load only. All other load ratings (motor, inductive, lamp) are less than 25 amperes. The failure rate (FR) level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under the rated load conditions specified herein. For application and caution information, see 6.1.
| MIL-PRF-83536-20 Revision A:2004 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, All Welded, AC Coils (No S/S Document) |
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| MIL-DTL-12883-45 Revision D:2003 | Sockets, Plug-In Electronic Components, for Relays, for 2-Pole, 5 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-PRF-83536-18 Revision D:2017 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, all Welded, DC Coils |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-PRF-83536-2 Revision C:2016 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| DSCC 86087 : E | RELAYS, ELECTROMAGNETIC, PERMANENT MAGNET DRIVE, 4PDT, LOW LEVEL TO 5 AMPERES, ALL WELDED, HERMETICALLY SEALED (SIMILAR TO MIL-R-6106/28 EXCEPT FOR 12V DC COIL AND INVERTED STUD MOUNT) |
| MIL-PRF-83536-8 Revision B:2015 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 5 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, All Welded, Transient Suppressed DC Coils (No S/S Document) |
| MIL-PRF-83536-32 Revision D:2017 | Relays, Electromagnetic, Established Reliability, 3PDT, 25 Amperes (Resistive), Permanent Magnet Drive, Hermetically Sealed, all Welded, DC Coil |
| MIL-PRF-83536-35 Revision B:2017 | Relays, Electromagnetic, Established Reliability, 1PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed All Welded, Transient Suppressed DC Coil |
| MIL-PRF-6106-20 Revision D:2011 | Relays, Electromagnetic, Magnetic Latch, 25 Amperes, SPDT, Hermetically Sealed |
| MIL-PRF-83536-34 Revision A:1999 | Relays, Electromagnetic, Established Reliability, 1PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed All Welded, DC Coil |
| MIL-DTL-12883-50 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components, Brackets and Socket Assembly for Relays, 2-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-R-83726-12 Revision F:2016 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TYPE 2A, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED, FIXED TIME, 0.100 TO 300 SECONDS |
| MIL-PRF-83536-23 Revision B:2016 | Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, all Welded, DC Coil |
| MIL-PRF-83536-13 Revision C:2013 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| DSCC 04054 : 0 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PDT, CONTINUOUS DUTY, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, AC COIL |
| SAE AS5363A | Electromechanical Power Controller/Relay, General Specification For |
| MIL-PRF-83536-19 Revision B:2013 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| MIL-PRF-83536-14 Revision A:2004 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, all Welded, AC Coil (No S/S Document) |
| MIL-DTL-12883-41 Revision F:2003 | Sockets, Plug-in Electronic Components, for Relays, 2-Pole, 10 Amperes (MIL-R-6106 and MIL-R-83536) |
| MIL-PRF-83536-4 Revision C:2014 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnet Drive, Magnetic Latch, Hermetically Sealed, All Welded, Transient Suppressed DC Coils (No S/S Document) |
| MIL-DTL-12883-52 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components Socket Assembly for Relays, 2, 3, and 4-Pole, Track Mount (MIL-PRF-6106, MIL-PRF-83536, and MIL-PRF-83726) |
| MIL-PRF-83536-25 Revision B:2016 | Relays, Electromagnetic, Established Reliability, 6PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, DC Coil |
| MIL-R-83726-18 Revision H:2016 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TRACK MOUNTED, TYPE 2A, CLASS B, 10 AMPERES, 2PDT, HERMETICALLY SEALED, FIXED TIME, 0.1 TO 300 SECONDS |
| MIL-PRF-83536-33 Revision D:2017 | Relays, Electromagnetic, Established Reliability, 3PDT, 25 Amperes (Resistive), Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coil |
| MIL-PRF-83536-1 Revision B:2011 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, DC Coils |
| MIL-PRF-83536-21 Revision C:2016 | Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Hermetically Sealed, all Welded, DC Coil |
| MIL-DTL-12883-44 Revision D:2003 | Sockets, Plug-in Electronic Components, Socket for Relays, 4-Pole, 5 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-DTL-12883-46 Revision D:2003 | Sockets, Plug-in Electronic Components, for Relays, 3-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-PRF-83536-16 Revision D:2016 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coil |
| MIL-PRF-83536-7 Revision B:2013 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 5 Amperes, Permanent Magnet Drive, Magnetic Latch, Hermetically Sealed, all Welded, DC Coils (No S/S Document) |
| MIL-PRF-83536-6 Revision E:2016 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 5 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| MIL-PRF-83536-11 Revision C:2013 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, AC Coils |
| MIL-PRF-83536-22 Revision D:2016 | Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| MIL-DTL-12883-40 Revision F:2003 | Sockets, Plug-in Electronic Components, for Relays, 4-Pole, 10 Amperes (MIL-PRF-6106, MIL-PRF-83536, MIL-PRF-83726, and MS27709) |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL-PRF-83536-3 Revision C:2015 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnet Drive, Magnetic Latch, Hermetically Sealed, all Welded, DC Coils (No S/S Document) |
| MIL-PRF-83536-37 Base Document:2003 | Relay, Electromagnetic, Established Reliability, 1PDT, 25 Amperes, Permanent Magnet Drive, Hermetically Sealed, All Welded, Transient Suppressed DC Coils |
| MIL-PRF-83536-15 Revision A:2004 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, DC Coil |
| MIL-PRF-83536-10 Revision D:2015 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Transient Suppressed DC Coils |
| MIL-PRF-83536-24 Revision B:2016 | Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, All Welded, Transient Suppressed DC Coils |
| MIL-PRF-83536-5 Revision D:2016 | Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 5 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, DC Coils |
| MIL-DTL-12883-56 Revision A:2003 | Socket, Plug-in Electronic Components, for Relays, 1-Pole, 10 Amperes (MIL-PRF-83536/34 and /35) |
| MIL-PRF-83536-12 Revision C:2013 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, all Welded, DC Coils |
| MIL-PRF-83536-9 Revision E:2016 | Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed, all Welded, Dc Coils |
| MIL-DTL-12883-47 Revision D:2003 | Socket, Plug-in Electronic Components, for Relays, 6-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MIL-DTL-12883-51 Revision B:2003 | Sockets and Accessories for Plug-In Electronic Components, Bracket and Socket Assembly for Relays, 4-Pole, 10 Amperes (MIL-PRF-6106, MIL-PRF-83536, and MIL-PRF-83726) |
| DSCC 84133 : E | RELAYS, ELECTROMAGNETIC, PERMANENT MAGNET DRIVE, 2PDT, LOW LEVEL TO 5 AMPERES |
| MIL-STD-202-212 Base Document:2015 | Method 212, Acceleration |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-883 Revision K:2016 | Microcircuits |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-750 Revision F:2011 | Test Methods for Semiconductor Devices |
| MIL-STD-202-107 Base Document : 2015 | Method 107, Thermal Shock |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| MIL-STD-202-312 Base Document:2015 | Method 312, Life, Intermediate Current Switching |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-112 Base Document:2015 | Test Method Standard Method 112, Seal |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
| MIL-STD-202-307 Base Document:2015 | Method 307, Contact Resistance |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.