![header thumbnail](/images/img-default-logo.png)
MIL-S-85510 Base Document:1981
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
Seats, Helicopter Cabin, Crashworthy, General Specification for
19-11-1981
1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PACKAGING
6 NOTES
Describes two types, three classes and four sizes of folding, lightweight, crashworthy seats used, by troops/passengers in helicopters.
DevelopmentNote |
NOTICE 1 - Notice of Inactivation for new design. (04/2004)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
This specification established the design requirements for two types, three classes and four sizes of lightweight, folding, crashworthy seats for use by troops/passengers in helicopters.
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT7)SEC2/SUPP4/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 4: DESIGN AND CONSTRUCTION (SUBPART D) |
DEFSTAN 00-970(PT7)SEC2/SUPP4/6(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 4: DESIGN AND CONSTRUCTION (SUBPART D) |
MIL-STD-1290 Revision A:1988 | LIGHT FIXED & ROTARY-WING AIRCRAFT CRASH RESISTANCE |
DEFSTAN 00-970(PT7)SEC3/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 3: STRUCTURAL STRENGTH AND DESIGN FOR OPERATION ON SPECIFIED SURFACES |
MIL HDBK 5 : G_VOL2 | METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES |
MIL-I-8500 Revision D:1980 | INTERCHANGEABILITY AND REPLACEABILITY OF COMPONENT PARTS FOR AEROSPACE VEHICLES |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING, AND WATERPROOFING, WITH APPROPRIATE TEST METHODS |
PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
MIL-M-3171 Revision C:1966 | MAGNESIUM ALLOY PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION |
TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
FED-STD-751 Revision A:1965 | STITCHES, SEAMS, AND STITCHINGS |
MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
MIL-W-8604 Revision A:1982 | WELDING, FUSION, ALUMINUM ALLOYS, PROCESSING AND PERFORMANCE OF |
MIL-STD-831 Base Document:1963 | TEST REPORTS, PREPARATION OF |
QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) |
CFR 49(PTS1-99) : 0 | TRANSPORTATION - SUBTITLE A - OFFICE OF THE SECRETARY OF TRANSPORTATION - SUBTITLE B - OTHER REGULATIONS RELATING TO TRANSPORTATION |
MIL-STD-143 Revision B:1969 | STANDARDS, AND SPECIFICATIONS ORDER OF PRECEDENCE FOR THE SELECTION OF |
MIL-STD-882 Revision E:2012 | System Safety |
MIL-W-25361 Revision E:1990 | WEBBING, TEXTILE, POLYESTER, LOW ELONGATION |
MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
SAE HDBK VOL 2 : 1999 | SAE HANDBOOK - PARTS AND COMPONENTS |
DOD-D-1000 Revision B:1977 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
MIL C 45662 : 0 | CALIBRATION SYSTEM REQUIREMENTS |
MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED PLYWOOD |
MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
MIL-STD-1261 Revision C:1988 | ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS |
QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
MIL-STD-22 Revision D:1979 | WELDED JOINT DESIGN |
PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
MIL C 6021 : H NOTICE 1 | CASTINGS, CLASSIFICATION AND INSPECTION OF |
MIL-STD-785 Revision B:1980 | RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION |
MIL-W-6873 Revision C:1991 | WELDING FLASH CARBON AND ALLOY STEEL |
V-T-295 Revision E:1985 | THREAD, NYLON |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.