PPP-B-601 Revision H:1989
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BOXES, WOOD, CLEATED PLYWOOD
Available format(s)
PDF
Superseded date
26-02-2001
Publisher
Requirements for new wood cleated plywood boxes to be used as containers for general overseas and domestic shipment
| Committee |
FSC 8115
|
| DevelopmentNote |
H Notice 1 - Notice of Cancellation/Superseded by ASTM D 6251/D6251M (09/2001)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| SAE AS 8568 : 2012 | BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) |
| MIL-C-47224 Revision B:1993 | COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
| MIL-C-53052 Base Document:1985 | Connector, Electrical, Power |
| O-F-499 Revision D:1985 | FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT) |
| O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| MIL-S-52541 Base Document:1966 | SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF |
| MIL-S-36662 Base Document:1970 | STOPPER, BOTTLE WHITE RUBBER |
| MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| AA C 30 : D | CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS) |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| GGG-G-670 Base Document:1956 | GRASS HOOKS, WHIP GRASS CUTTERS, AND WHIP WEED CUTTERS |
| MIL-K-52338 Revision B:1991 | KEEPER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL P 17667 : D | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON CORROSIVE) |
| MIL-C-82890 Base Document:1993 | CARTRIDGE, FIRE EXTINGUISHER CCU-120/A |
| MIL T 0022238 : J | TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS |
| MIL C 14522 : D | COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT |
| MIL-R-38370 Revision B:1972 | RECORDING SET, FLIGHT DATA A/A24U-10 |
| MIL-D-10662 Revision D:1983 | 1,2 DICHLOROETHANE, TECHNICAL |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| MIL P 51529 : 0 | PACKAGING OF DECONTAMINATING AGENT |
| MIL A 24779 : 0 | ANODES, SACRIFICIAL ALUMINUM ALLOY |
| MIL-A-52568 Revision C:1982 | AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR |
| PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| MIL-D-70327 Base Document:1959 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| RR-F-191 Revision K:1990 | FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK FENCE FABRIC, AND ACCESSORIES) (GENERAL SPECIFICATION) |
| JJ-N-171 Revision C:1977 | NET, INSECT |
| MIL P 21454 : 0 | POWER SUPPLIES, METALLIC RECTIFIER, CATHODIC PROTECTION, RESERVE FLEET |
| MIL-C-36229 Base Document:1964 | CYLINDER, GRADUATED LABORATORY, POLYPROPYLENE |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-J-87250 Base Document:1988 | JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-S-52300 Revision D:1991 | SHOE ASSEMBLY, TRESTLE |
| L-B-001190 Base Document:1959 | BOTTLE, SCREW CAP (MEDICAMENT CONTAINER/DISPENSER FOR FIELD KIT/ASSEMBLIES) |
| MIL-B-20179 Revision E:1992 | BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| MIL-F-81334 Revision B:1977 | FOAM, PLASTIC, FLEXIBLE, OPEN CELL, POLYESTER TYPE POLYURETHANE |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-G-52859 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 400 HERTZ, PU-760/M |
| MIL-P-44115 Revision B:1992 | PLATFORM, ASSEMBLY, CARGO, AERIAL DELIVERY, TYPE V |
| MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
| MIL T 14387 : A | TEST SET, RADAR AN/UPM-60() |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| MMM-A-132 Revision B:1994 | ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL-H-43905 Revision C:1990 | HASP, HIGH SECURITY PADLOCKS |
| MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MMM-A-1617 Revision B:1995 | ADHESIVE RUBBER BASE GENERAL PURPOSE |
| L-P-535 Revision E:1979 | PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| MIL-H-52297 Revision D:1988 | HOLDFAST ASSEMBLY: BAR TYPE |
| MIL-L-11647 Revision E:1991 | LEVER, BALK DEPRESSING, CLAW BAR TYPE |
| MIL-T-13420 Revision A:1959 | TELEPHONE SET TA 264() PT |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL-R-10761 Revision A:1962 | ROTARY CONVERTER (MOTOR GENERATOR) PU 134 ()/U, PU 140 ()/U, PU 141()/U & PU 143 ()/U |
| MIL-T-21677 Base Document:1958 | TEST SET MARK 3 MOD 2 |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL-S-55234 Base Document:1963 | STANDING WAVE RATIO-POWER METER, ME-165 ( )/G |
| MIL-O-37997 Base Document:1985 | OXYGEN GAS, USP HIGH PRESSURE, CYLINDER |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL-A-85705 Revision A:1987 | ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| MIL-I-81550 Revision C:1983 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
| MIL-C-13766 Revision C:1983 | CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005 |
| DOD-B-24559 Base Document:1977 | BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC) |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-22368 Revision D:1980 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS AND BOATS |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-P-55213 Base Document:1963 | POWER SUPPLY PP-1588 ( ) MPQ-4A |
| MIL-T-21684 Base Document:1958 | TEST SET MARK 96 MOD 1 |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| MIL-L-52056 Revision D:1984 | LIGHT, SIGNAL, SURVEYING: SELF ILLUMINATED WITH CARRYING CAEM FOR USE WITH RANGE POLE |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| MIL-C-12517 Revision A:1965 | CASE, HYDROGEN GENERATOR SET (CASE CY-219 ()/TMQ-3) |
| MIL-R-46837 Revision B:1990 | RACEWAY, STEEL, RIGID |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL W 5521 : B | WASHER, AIRCRAFT HYDRAULIC PACKING BACK UP |
| MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
| MIL H 27893 : E | HARNESS, PARACHUTIST S, INDIVIDUAL EQUIPMENT PACK (H TYPE) |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL A 5815 : E | ANTENNA, AIRBORNE, UHF - BAND GENERAL SPECIFICATION FOR |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-C-51047 Revision B:1987 | COMPOUND, ANTISEEPAGE, FOR COOLING SYSTEM, INTERNAL COMBUSTION ENGINE (METRIC) |
| MIL-S-52836 Revision A:1974 | SUPPLEMENTARY SET, BRIDGE, TROOP SUPPORT, PACKAGING OF |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| MIL D 9129 : D | DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR |
| MIL-P-53124 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| PPP-P-001938 Base Document:1976 | PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF |
| MIL-G-52557 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5 KW 60 HERTZ PU-620M |
| MIL-P-25621 Revision B:1974 | PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS |
| MIL-D-37219 Base Document:1975 | DISULFIRAM TABLETS NF |
| MIL-B-52472 Revision C:1987 | BAG SAND POLYPROPYLENE |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-P-87938 Base Document:1984 | PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
| MIL-C-51211 Revision B:1967 | CALCULATOR, DOWNWIND TOXIC VAPOR HAZARD, POINT SOURCE, ABC-M2 |
| MIL-C-36611 Base Document:1969 | |
| GG-S-636 Revision B:1957 | SPLINT, WIRE, LADDER |
| MIL-T-26561 Revision C:1984 | TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE |
| GGG-B-0060 Revision A Interim Revision:1966 | BAG, TOOL SATCHEL |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| MIL M 28837 : 0 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-P-15047 Revision C:1971 | PLASTIC MATERIAL, LAMINATED THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-P-52854 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 30 KW, 50/60 HERTZ, AN/MJQ-10A |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| DDD-C-001023 Base Document:1966 | CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER) |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| MIL-P-13607 Revision B:1975 | PADDING MATERIAL, RESILIENT (FOR PACKAGING OF AMMUNITION) |
| MIL-S-51296 Base Document:1967 | SURVIVAL KIT, AIRMAN S, SEEK-1 |
| MIL-I-27677 Revision E:1990 | INDICATOR, LIQUID OXYGEN QUANTITY |
| MIL-R-10985 Revision A:1956 | REEL, AUTOMATIC TAKE-UP, EXTENSION CABLE, 24-VOLT, D.C |
| MIL D 83320 : 0 | DETECTOR, MAGNETIC AZIMUTH DSU-14/A |
| MIL-M-49199 Revision A:1985 | Microphone, Linear M-162/AIC General Specification for |
| K-P-146 Revision E:1979 | TARPAULINS, COTTON DUCK, FWWMR |
| MIL-T-10163 Revision E:1992 | TERRAIN MODELING KIT, TRAINING AID |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-F-36271 Base Document:1964 | FOOTPRINTER, INFANT IDENTIFICATION, DISPOSABLE, 50S |
| MIL-H-36376 Revision B:1971 | HOLDER, MICROPOROUS BACTERIAL FILTERING DISK |
| MIL-T-21669 Base Document:1958 | TEST SET, MARK 25 MOD 1 |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL A 52512 : A NOTICE 1 | AIR CONDITIONERS: VERTICAL, COMPACT 6,000 BTU/HR |
| GG-C-131 Revision C:1977 | CASSETTES, RADIOGRAPHIC FILM (MEDICAL) |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
| MIL-T-22047 Base Document:1959 | TEST SET MARK 27 MOD 1 |
| MIL-N-37996 Base Document:1985 | NITROUS OXIDE GAS USP HIGH PRESSURE, CYLINDER |
| MIL-T-52956 Revision A:1984 | TEST SET, POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-427 |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-B-52467 Revision C:1981 | BAR, CARRYING LIGHT TACTICAL BRIDGE |
| MIL-P-18324 Revision D:1964 | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| MIL C 44404 : 0 | COMMAND POST, TENT, STANDARDIZED INTEGRATED COMMAND POST SYSTEM |
| MIL-B-14075 Revision B:1975 | BAG, COOPER'S TOOLS |
| MIL-C-0010244 Revision H:1978 | CRYPTOGRAPHIC EQUIPMENT DESTROYER INCENDIARY, TH4, M2A1 |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| GG-C-2736 Revision A:1987 | CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION) |
| MIL-P-44305 Base Document:1988 | PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE |
| PPP-P-1132 Revision C:1983 | PACKAGING OF WOOLLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS |
| AA-W-001950 Base Document:1975 | WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-V-82466 Base Document:1967 | VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| SS-S-200 Revision E:1984 | SEALANT, JOINT, TWO COMPONENTS, JET BLAST RESISTANT, COLD APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| MIL-C-0016809 Revision C:1969 | CASE, MEDICAL INSTRUMENT AND SUPPLY SET, NONRIGID, NO. 4 |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| MIL-H-12240 Revision A:1958 | HYDROMETER, SYRINGE, BATTERY TS-765()/U |
| MIL-B-8568 Revision B:1967 | BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG] |
| MIL S 25879 : C | SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A |
| MIL-B-13872 Revision C:1975 | BOX, CONTAINERS, FOR NON-ELECTRIC BLASTING CAPS |
| MIL-S-20552 Revision B:1983 | SODIUM AZIDE, TECHNICAL (METRIC) |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| A-B-2787 Base Document:1992 | BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE) |
| O-S-642 Revision G:1993 | SODIUM PHOSPHATE, TRIBASIC, ANHYDROUS, DODECAHYDRATE, & MONOHYDRATE, TECHNICAL |
| MIL-A-53009 Revision A:1991 | ADDITIVE, ANTIFREEZE EXTENDER, LIQUID COOLING SYSTEM |
| ASTM F 1348/F1348M : 1991 : R2007 | Standard Specification for Pneumatic Rotary Descaling Machines |
| MIL-T-27305 Revision C:1987 | TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ |
| MIL-B-52118 Revision E:1991 | BALK DECK |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL-B-43909 Base Document:1974 | BELLOWS, EXPANDABLE SHELTER (MUST) |
| MIL-C-10922 Revision G:1985 | CASE, PARACHUTIST'S, INDIVIDUAL WEAPONS, M-1950, ADJUSTABLE |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL-B-51333 Base Document:1952 | BARIUM PERCHLORATE, ANHYDROUS, ANALYZED REAGENT |
| MIL-B-55298 Base Document:1965 | BAROGRAPH ML-563 /UM |
| MIL R 1229 : C | RUBBER SHEET PACKING, SOLID, WIRE CLOTH INSERTED, SYMBOL, 2354 |
| MIL-S-18538 Base Document:1955 | SIGNAL MINIATURE PRACTICE BOMB, MK 4 MOD 3 AND MOD 4 |
| MIL E 75 : H | ELECTRON TUBES PACKING OF |
| MIL-R-22628 Base Document:1964 | RESIN, CASTING, EPOXY, ALUMINUM FILLED |
| MIL-A-37049 Base Document:1974 | APRON, DENTAL, PLASTIC, DISPOSABLE |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL C 62015 : F NOTICE 1 | CARRIER, CARGO, FULL-TRACKED, M548 AND N548A1; AND CARRIER, ELECTRONIC WARFARE SYSTEMS, FULL-TRACKED SHIPMENT OF |
| MIL-H-36343 Revision B:1966 | HYDROMETERS, GRADUATED SCALE WITH THERMOMETER, API GRAVITY |
| MIL C 39028 : C | CAPACITORS, PACKAGING OF |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-T-55402 Base Document:1974 | TRANSMITTER GROUP, SIMULATED RADIAC, HOT SPOT OT-52( )/T |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL-P-22296 Revision B:1973 | PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN) HEAVY WALLED |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| MIL-C-13125 Revision C:1983 | COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS |
| MIL-B-40028 Revision B:1976 | BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS |
| MIL-P-12420 Revision D:1991 | PLASTIC MATERIAL, CELLULAR, ELASTOMERIC |
| HH-G-101 Revision E:1990 | GASKET, METALLIC-ENCASED |
| DDD R 306 : B | RIBBONS, TELETYPEWRITER, RECORD |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-S-38160 Revision B:1968 | Selector, Antenna C-4808/ARC |
| GGG-P-463 Revision C:1973 | PLATE, SURFACE, (GRANITE) |
| MIL-B-37163 Base Document:1975 | BANDAGE, COTTON, ELASTIC |
| MIL-A-83162 Revision A:1989 | AMPLIFIER, SYNCHRO, SIGNAL AM-6015/A |
| MIL I 15379 : B NOTICE 1 | MILITARY SPECIFICATION - INHALATOR, DIVERS, FOR ADMINISTERING HELIUM OXYGEN DURING DECOMPRESSION |
| MIL-H-3280 Revision E:1990 | HOIST, CHAIN, MANUALLY OPERATED, PACKAGING OF |
| GG-T-380 Base Document:1958 | |
| MIL-I-3505 Revision C:1960 | INSULATION SHEET AND TAPE, ELECTRICAL, COIL AND SLOT, HIGH TEMPERATURE |
| TT-I-547 Revision A:1956 | INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES |
| GGG-P-446 Revision A:1964 | PLATE, LAPPING |
| MIL-M-7255 Revision B:1969 | MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1 |
| MIL-R-19558 Revision A:1960 | REGULATOR, AIR, DEMAND, DIVER'S |
| MIL-B-16008 Revision C:1965 | BRICK, INSULATION, HIGH TEMPERATURE, FIRE CLAY |
| SS-C-466 Revision E:1964 | CLOTH, THREAD, AND TAPE-ASBESTOS |
| GG M 181 : D | MEASURER, MAP |
| MIL-M-6867 Revision C:1969 | MAGNETIC INSPECTION UNITS |
| MIL-P-83310 Base Document:1971 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| MIL L 44076 : A | LOWERING LINE ASSEMBLY |
| NNN-C-688 Base Document:1962 | CRUCIBLE, IGNITION LABORATORY METAL |
| MIL-S-12991 Revision B:1971 | SURVEYING SET, TOPOGRAPHIC COMPANY, PACKAGING OF |
| MIL-S-52548 Revision A:1975 | SURVEYING SET, TRIANGULATION, PRINCIPAL OBSERVER AND SIGNAL TENDER PACKAGING OF |
| MIL G 52886 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60 KW, 400 HERTZ, PU-707 A/M |
| CCC-S-00320 Base Document:1963 | SHEETING AND TAPE, REFLECTIVE; ADHESIVE BACKING |
| MIL-B-13164 Revision A:1973 | BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN |
| MIL-S-13224 Revision A:1959 | SURVEYING SET, SUPPLEMENTARY EQUIPMENT TOPOGRAPHIC BATTALION: SET NO. 15 PACKAGING OF |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| MIL-P-63381 Base Document:1980 | PAPER, SHOT SHELL (FOR USE IN AMMUNITION) |
| MIL T 5780 : D NOTICE 1 | TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY |
| MIL-A-47089 Base Document:1974 | ADHESIVE, METAL FILLED, CONDUCTIVE, ELECTRICAL AND THERMAL |
| GG D 00458 : C | DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE |
| NNN-D-345 Revision A:1963 | DISH EVAPORATING PLATINUM |
| MIL W 87893 : A | WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL |
| MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
| MIL P 8184 : E | PLASTIC SHEET, ACRYLIC, MODIFIED |
| MIL-G-3048 Revision B:1955 | GENERATOR SET, DIESEL ENGINE, DIRECT AND ALTERNATING CURRENT [NAVAL SHIP BOARD USE] |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-B-43550 Revision A:1979 | BAG, WATER REPELLENT, SIGNAL EQUIPMENT, BG 102 VALIDATED JUN 1972 |
| GG S 776 : C | STRAIGHTEDGE, STEEL, DRAFTSMEN |
| MIL-S-64052 Base Document:1988 | SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER, (UNDERGROUND CONNECTED) |
| MIL T 781 : D | TERMINAL, WIRE ROPE, SWAGING |
| MIL-A-82950 Base Document:1995 | ACTUATOR, BELLOWS ATU-117/P |
| MIL-G-37097 Base Document:1975 | GENTIAN VIOLET TABLETS |
| MIL-STD-1428 Base Document:1981 | CLEANING COMPOUNDS |
| MIL-B-37201 Base Document:1975 | BISACODYL SUPPOSITORIES, NF |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL-T-7305 Revision C:1987 | TRANSMITTER, PRESSURE TORQUE TYPE D 5 |
| MIL E 6060 : D | ENVELOPE, PACKAGING WATER VAPOR PROOF, FLEXIBLE |
| MIL E 37226 : 0 | OESTROGENS CONJUGATED, CREAMS |
| MIL-A-29247 Base Document:1986 | AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-STD-1816 Base Document:1992 | PRESERVATION, PACKAGING & PACKING OF RUBBER & NYLON FUEL, OIL & WATER-ALCOHOL CELLS |
| MIL P 81997 : B | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT |
| MIL-S-36594 Base Document:1969 | SODIUM CHLORIDE SODIUM BICARBONATE MIXTURE 4.5 GM 2S |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-S-52362 Revision D:1977 | SURVEYING SET GENERAL PURPOSE FOR PLAINMETRIC CONSTRUCTION & TOPOGRAPHIC SURVEYS, PACKAGING OF |
| MIL-B-16907 Revision G:1988 | BOILER, STEAM, HIGH PRESSURE, AUXILIARY FIRE TUBE TYPE, NAVAL SHIPBOARD |
| QQ-W-345 Revision B:1965 | WIRE, ELECTRICAL, STEEL, COPPER COVERED |
| GG-B-636 Revision B:1960 | BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE |
| MIL-G-29170 Revision B:1988 | GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
| MIL-V-21701 Revision B:1969 | Valve, Check, Oxygen Mask, Inlet |
| GG D 475 : A | DIVIDER, SPACING, EQUAL |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| MIL-T-82270 Revision B:1975 | TROUSERS, WET SUIT (CHLOROPRENE FOAM) |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL N 27444 : D | NET, CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, AND HCU-16/C |
| AA-T-636 Revision A:1957 | TRAY, DESK; AND SUPPORT SET, STACKING, DESK TRAY |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| GG-H-00582 Revision A:1967 | HOLDER, PATIENT'S BED TRAY CARD |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| MIL S 3470 : D | SPLINE AND WEIGHTS SET |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL-C-11347 Revision E:1977 | CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-C-5040 Revision H:1994 | Cord, Fibrous, Nylon |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| MIL-C-11260 Revision D:1980 | CLAMP, HANDLE, STEEL TAPE |
| KK-B-151 Revision H:1977 | BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE |
| MIL R 16847 : E | RING BUOY, LIFESAVING, UNICELLULAR PLASTIC |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-P-43951 Revision A:1989 | PADLOCK AND PADLOCK SETS, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE |
| GG-M-001371 Base Document:1978 | MALLET, PLUGGING, DENTAL |
| MIL-C-3133 Revision C:1976 | CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED |
| MIL P 0036599 : 0 | PIPET, PLASTIC, DISPOSABLE, STERILE |
| MIL-T-21369 Revision C:1990 | TEST SET MARK 127 MOD 4 |
| MIL-P-52674 Base Document:1969 | PHOTOMAPPING SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL A 25457 : B NOTICE 1 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-B-36419 Base Document:1965 | BAG, URINE COLLECTION, PLASTIC, DISPOSABLE, 50'S |
| MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
| MIL-B-36882 Base Document:1972 | BAG, FOOD SAMPLE, POLYETHYLENE, DISPOSABLE |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL-C-12512 Revision A:1960 | COILS, TELEPHONE REPEATING (COILS C-161() AND C-288()) |
| MIL-A-37108 Base Document:1974 | ANESTHESIA SET, EPIDURAL, DISPOSABLE |
| MIL-D-24542 Revision B:1988 | DIVING OUTFIT, LIGHTWEIGHT |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| JJ-B-191 Revision A:1967 | BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN) |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
| MIL-P-5431 Revision A:1967 | Plastic, Phenolic, Graphited Sheets, Rods, Tubes and Shapes |
| MIL-R-81574 Base Document:1968 | RESCUE HAND TOOL, PNEUMATIC |
| FF F 111 : E | FASTENERS, PAPER, METALLIC, COMPRESSOR TYPE |
| NNN-T-785 Revision B:1969 | TUBE CENTRIFUGE PLASTIC |
| MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG-B-89 Revision B:1958 | BAND, ABRASIVE (SILICON-CARBIDE), FOR DENTAL LATHES |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| MIL-D-82490 Base Document:1967 | DRIVER, GAS OPERATED MARK 8 MOD 0 |
| HH-P-00106 Revision D:1956 | PACKING MATERIAL, FLAX OR HEMP |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| TT-P-641 Revision G:1976 | PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE |
| SAE AMS P 83310 : 2016 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| ASTM D 6576 : 2013 : REDLINE | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| SAE AS 39631 : 1999 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| SAE AMS T 6841 : 2016 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| ASTM F 1182 : 2007 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| ASTM F 1312 : 1990 : R2002 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM F 957 : 1991 : R2006 | Standard Specification for Gong, Sound Signaling |
| MIL-A-52963 Revision B:1986 | AIR CONDITIONER: SPLIT-PACKAGE, 208-VOLT, 3-PHASE, 400-HERTZ, AC, 18,000 BTU/HR COOLING, 30,000 BTU/HR HEATING |
| MIL-L-15596 Revision G:1988 | LOCK, COMBINATION (SAFE AND SAFE LOCKER) |
| MIL-I-37078 Base Document:1974 | INCUBATOR, BACTERIOLOGICAL, Small, 115 volt, 50/60 Hz, AC |
| MIL-B-8907 Revision A:1983 | BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD |
| MIL-S-36971 Revision A:1976 | SHAKING MACHINE, LABORATORY, 115 VOLT, 60 HZ, AC |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| J-C-580 Revision B:1974 | CORD, ELECTRICAL AND WIRE, ELECTRICAL (0- TO 600- VOLT SERVICE) |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL-T-37213 Revision A:1976 | TIMER, INTERVAL 115 VOLT 60 HZ AC |
| GG-I-488-1 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, SMALL |
| AA-C-2859 Base Document:1994 | CABINET, SECURITY, WEAPONS STORAGE |
| GG-I-488 Revision C:1957 | INCUBATOR, BACTERIOLOGICAL |
| MIL T 82073 : D NOTICE 1 | TRUCK, LUBRICATING AND FUEL SERVICING, 4 BY 2 AND 4 BY 4 |
| MIL-A-36495 Revision A:1975 | AUDIOMETER, GENERAL DIAGNOSTIC |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING |
| J-C-1270 Revision B:1973 | CABLE ASSEMBLY, POWER, ELECTRICAL |
| MIL-S-36963 Revision A:1976 | STIRRER-HOT PLACE, MAGNETIC, LABORATORY |
| GG-I-446 Revision E:1978 | ILLUMINATOR, X-RAY FILM |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| GG-B-00146 Revision B:1965 | BATH, WHIRLPOOL, CORROSION-RESISTING STEEL |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| MIL-A-37192 Base Document:1975 | AUDIOMETER. AUTOMATIC |
| GG-I-488-2 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, MEDIUM |
| MIL-B-83050 Revision D:1985 | BOLT, SELF RETAINING, IMPEDANCE TYPE |
| GG-I-488-3 Base Document:1976 | INCUBATOR BACTERIOLOGICAL, LARGE |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-W-37045 Base Document:1974 | WATER BATH, ELECTRIC, SEROLOGICAL, 6 RACK, 115 VOLT, 50-60 HZ, AC |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| AA-F-363 Revision C:1990 | FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MIL-C-37022 Revision A:1973 | CENTRIFUGES, LABORATORY, FLOOR MODEL |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
| MIL-W-37090 Base Document:1974 | WATER BATH, ELECTRIC, Precision, 6 Rack, 115 Volt, 50-60 Hz, AC |
| MIL-C-5501 Revision G:1989 | CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL |
| MIL-A-82175 Base Document:1968 | ARMOR, BODY, FRAGMENTATION, PROTECTIVE: FOOTWEAR |
| NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
| MIL-P-46144 Revision C:1986 | PLASTIC SHEET, POLYCARBONATE |
| MIL-C-52788 Revision B:1992 | CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED |
| MIL-C-37040 Revision A:1978 | CENTRIFUGE, LABORATORY, SMALL, 115 VOLT, 600 HZ, AC |
| MIL-B-8831 Revision B:1982 | BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR |
| MIL W 37060 : A NOTICE 1 | WATER BATH, ELECTRIC, SEROLOGICAL, 115 VOLT, 50/60 HZ, AC |
| J-C-30 Revision B:1989 | CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) |
| MIL-R-36557 Revision C:1984 | REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-B-7838 Revision C:1989 | BOLT, INTERNAL WRENCHING 160 KSI FTU |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
| MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
| MIL-S-503 Revision B:1988 | SIREN, ELECTRIC, 2 AND 5 HORSEPOWER |
| MIL-DTL-55507 Revision F:1997 | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF |
| MIL-C-37220 Base Document:1976 | CENTRIFUGE, LABORATORY 115 VOLT 50/60 HZ |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| GG-S-00800 Base Document:1965 | SUCTION APPARATUS, SURGICAL, AUTOMATIC, THERMOTIC, MOBILE, 110 VOLT, AC-DC |
| MIL-C-11085 Revision D:1986 | CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES) |
| MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
| MIL-A-36926 Revision A:1974 | ANALYZING KIT, MEAT FAT CONTENT 115 VOLT, 60 HZ |
| MIL-C-47221 Revision A:1982 | COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
| QQ-M-56 Revision B:1960 | MAGNESIUM ALLOY, SAND CASTINGS |
| MIL-P-71012 Revision A:1994 | PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11 |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| MIL-E-52715 Revision C:1992 | ERECTION AND MAINTENANCE EQUIPMENT FOR CABLE REINFORCEMENT SET FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-P-22046 Base Document:1959 | POWER SUPPLY MARK 20 MOD 1 |
| MIL I 7067 : B | INDICATOR, POSITION, FLAPS, 0 - 60 DEGREE MARKING, 2 INCH SIZE |
| MIL-P-52979 Base Document:1980 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 60 KW, 50/60 HERTZ, AN/MJQ-12A |
| MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
| MIL-B-13831 Revision J:1985 | BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN |
| MIL-C-26861 Revision C:1988 | CUSHIONING MATERIAL, RESILIENT TYPE, GENERAL |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| SAE AS 8712 : 2013 | VALVE; AIR RELIEF, LOW PRESSURE |
| MIL C 19647 : A | CORROSION REMOVING COMPOUND, PASTE (PHOSPHORIC ACID BASE) |
| MIL-C-55038 Revision A:1963 | CHARGER, RADIAC DETECTOR, PP-1578 ( )/PD |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL) |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-L-7806 Revision A:1956 | LIGHT, PANEL, PLASTIC PLATE, LIGHTING |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| MIL-M-17185 Revision A:1956 | MOUNT, RESILIENT, GENERAL SPECIFICATION AND TESTS FOR (SHIPBOARD APPLICATION) |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| MIL-M-52677 Revision A:1975 | MULTIPLEX SECTION, TOPOGRAPHIC MAPPING SET TRUCK MOUNTED, PACKAGING OF |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
| GG H 00590 : NOTICE 1 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| MIL-M-13189 Revision A:1954 | MICROPHONE-ELEMENTS, CARBON AND EARPHONE ELEMENTS, MAGNETIC (FOR TELEPHONE AND RADIO USE) |
| MIL-DTL-62533 Revision A:1995 | CARRIER, CARGO, TRACKED, 22-TON, AMMUNITION MEDIUM: M992/A1/A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-L-45779 Revision C:1984 | LOADER-TRANSPORTER, GUIDED MISSILE, XM501E2 AND XM501E3 PROCESSING FOR STORAGE AND SHIPMENT OF |
| DOD-P-24562 Revision A:1982 | PROPELLERS, SHIP, CONTROLLABLE PITCH (METRIC) |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL A 28875 : 0 | AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| MIL-C-0010597 Revision F:1994 | CLEANING COMPOUND WITH CONDITIONER FOR ENGINE COOLING SYSTEMS |
| O-C-303 Revision D:1985 | CHROMIUM TRIOXIDE, TECHNICAL |
| MIL-G-25507 Revision B:1991 | Gage, Pressure, Dial Indication, Oxygen 0-2000 PSI, Type MF-2 |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| PPP-P-1136 Revision D:1986 | PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS |
| PPP-C-1683 Revision A:1988 | CUSHIONING MATERIAL, EXPANDED POLYSTYRENE LOOSE FILL BULK (FOR PACKAGING APPLICATION) |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL-R-0036837 Revision A:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| GG-T-671 Revision F:1981 | TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION) |
| MIL-R-23461 Revision A:1987 | RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING |
| MIL-F-63067 Base Document:1976 | FUZE, M539, POWER SUPPLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| MIL-T-21671 Base Document:1958 | TEST SET MARK 126 MOD 0 |
| MIL-S-12840 Revision H:1992 | SADDLE ASSEMBLY, STEEL AND PLYWOOD, FOR 24-TON, 2-PART PNEUMATIC FLOAT, PONTOON BRIDGE |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-T-52957 Revision A:1978 | TEST SET, POWER SUPPLY FOR POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-428 |
| MIL-A-3816 Revision F:1992 | ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF |
| MIL-D-3716 Revision B:1987 | DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION |
| MIL-F-63068 Base Document:1976 | FUZE, M539, IMPACT SWITCH ASSEMBLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| HH-F-341 Revision F:1973 | FILLERS, EXPANSION JOINT: BITUMINOUS (ASPHALT AND TAR) AND NONBITUMINOUS (PREFORMED FOR CONCRETE) |
| MIL-R-52928 Base Document:1977 | RESERVOIR SYSTEM, FABRIC, COLLAPSIBLE, 25,000 BBL, PETROLEUM, PACKAGING OF |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK |
| MIL D 12817 : A | DRAFTING EQUIPMENT SET, BATTALION; SET 1, PACKAGING OF |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| MIL-P-20385 Revision E:1982 | PROTRACTORS, SEMICIRCULAR, PLASTIC, GRADUATED IN MILS, YARDS, METERS AND INCHES |
| FF-L-2740 Revision A:1997 | LOCKS, COMBINATION |
| MIL-R-27777 Revision B:1973 | RELAY, TELEGRAPH, PASSIVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-L-13188 Revision C:1984 | LEATHER, CATTLEHIDE, CHROME TANNED, HYDRAULIC PACKING FOR RECOIL MECHANISMS |
| MIL C 7958 : A | CONTROL, PUSH PULL, FLEXIBLE AND RIGID |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL G 14305 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL R 0043003 : E | RELEASE, CARGO PARACHUTE, 5000 POUND CAPACITY |
| GG-T-00311 Revision B:1967 | THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER) |
| MIL-C-38392 Revision A:1969 | COMPRESSOR, HERMETIC, AIR CONDITIONING, GENERAL SPECIFICATION FOR |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62mm: M60E3 |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL H 13253 : D | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-C-52648 Revision D:1993 | CRANE, CRAWLER MOUNTED, 40 TON AT 12 FOOT RADIUS, 2 CUBIC YARD, DIESEL-ENGINE DRIVEN |
| MIL-B-16755 Revision B:1964 | BOTTLE, NURSING, WIDE MOUTH |
| GG-D-635 Revision D:1984 | DRAWING BOARD AND DRAWING BOARD TRESTLES |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| PPP-P-1133 Revision C:1983 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-B-42079 Base Document:1994 | BRACE ASSEMBLY ADJUSTABLE BED |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| MIL-A-36194 Base Document:1964 | ANVIL, OPTICIAN'S, RIVETING |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-T-52332 Revision B:1991 | TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| GG I 00521 : NOTICE 1 | INDICATOR, STERILIZATION |
| MIL-G-53010 Base Document:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 100 KW, 50/60 HERTZ, PU-495B/G |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL-N-37283 Revision A:1976 | NORGESTREL AND ETHINYL ESTRADIOL TABLETS USP |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| MIL C 6458 : C | CHAIN ASSEMBLY, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
| MIL-R-43003 Revision F:1994 | RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL-C-42061 Base Document:1988 | CAP, SCREW, BOTTLE AND JAR |
| MIL-R-43608 Revision A:1981 | RIP CORD, PARACHUTE, PERSONNEL: GENERAL SPECIFICATION FOR |
| MIL-P-22968 Revision B:1984 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL F 51353 : A NOTICE 1 | FUZE, HAND GRENADE, M201A1 |
| MIL-R-42043 Base Document:1987 | REGULATOR, OXYGEN |
| MIL-F-45687 Base Document:1961 | FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-S-3419 Revision B:1968 | SHOP EQUIPMENT, CARTOGRAPHIC INSTRUMENT REPAIR, FIELD MAINTENANCE, PACKAGING OF |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| GG-W-239 Revision C:1985 | WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL) |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| MIL-T-1205 Revision C:1961 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, AIR AND WATER, STANDARD |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL-A-6589 Revision A:1968 | AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2 |
| JJJ-A-20 Base Document:1958 | ACACIA, TECHNICAL (GUM ARABIC) |
| MIL-B-3067 Revision B:1959 | BRIDGE RESISTANCE (RESISTANCE BRIDGE ZM-4) (1U (ADDENDUM (1))) |
| MIL-D-3344 Revision D:1990 | DIVING EQUIPMENT SET, TWO PERSONS 100 FOOT DEPTH, PACKAGING OF |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| NNN-T-001293 Base Document:1996 | TUBE BLOOD COLLECTING VACUUM NONSTERILE |
| P-D-240 Base Document:1960 | DETERGENT, SURGICAL |
| MIL-P-15035 Revision C:1962 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN |
| L-L-330 Revision B:1974 | LINER, PLASTIC, WASTE RECEPTACLE |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MIL W 3662 : B | WIRE, PLATINUM ALLOY [PLATINUM RUTHENIUM, PLATINUM IRIDIUM |
| MIL-E-83510 Revision A:1980 | EARPHONE ELEMENT |
| MIL-DTL-62015 Revision G:1995 | CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-W-52875 Revision B:1983 | WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL-M-52673 Base Document:1970 | MAP REVISION SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKING OF |
| MIL-A-36188 Revision B:1989 | APRON, DENTAL, PLASTIC |
| AA-S-698 Revision B:0196 | STOOL, STRAIGHT |
| MIL M 26542 : D (1) SUPP 1 | MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR |
| MIL-B-23958 Revision A:1967 | BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING |
| L-P-508 Revision H:1977 | PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE |
| MIL-P-38199 Revision B:1971 | PAD, PARACHUTE HARNESS, QUICK RELEASE |
| PPP-P-1937 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL-A-36950 Base Document:1973 | ASPIRATOR UNIT, SUCTION-PRESSURE APPARATUS |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| NNN-C-1698 Revision A:1975 | COUNTER BLOOD CELLS DIFFERENTIAL |
| NNN-C-1434 Revision C:2004 | COVER GLASS MICROSCOPE SLIDE |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-A-85481 Base Document:1981 | ARMING WIRE ASSEMBLIES |
| GG-R-1971 Base Document:1976 | RETRACTOR, RIB, HARKEN |
| MIL H 12487 : B NOTICE 1 | HEADSET ELECTRICAL (HEADSETS ELECTRICAL H-16)(/U AND HEADSETS H-65)(/U |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-B-52251 Revision C:1988 | BRACKET, SLING ATTACHMENT, FOR BEAMS AND GIRDERS OF LINE OF COMMUNICATION BRIDGES |
| GG-I-00552 Base Document:1964 | |
| MIL-C-55416 Base Document:1965 | CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF) |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| NNN-S-636 Revision C:1975 | PLATE SPOT TEST WHITE PORCELAIN |
| MIL-F-51465 Revision A:1987 | FUZE, FLOATING SMOKE POT, M207A1 |
| GG-S-1616 Revision A:1987 | SCISSORS, COLLAR AND CROWN |
| GG-B-735 Revision B:1985 | BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED) |
| FED-STD-803 Base Document:1991 | PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| MIL-H-1679 Revision F:1992 | HOOK, TENT; WITH THIMBLE, FOR GUY LINE, ASSEMBLY TENT |
| MIL H 83511 : 0 | HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATIONS FOR |
| GG-W-101 Revision B:1957 | WASHERS, BEDPAN AND URINAL |
| MIL-A-38462 Revision B:1970 | AIR CONDITIONER A/E32C-30 |
| QQ-C-525 Revision B:1962 | COPPER ALLOY INGOTS, LEADED AND NONLEADED TIN BRONZE, RED BRASS, AND SEMI RED BRASS) |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| MIL-T-23132 Revision A:1972 | TUNGSTEN DELAY COMPOSITION |
| MIL-F-8839 Revision A:1988 | Fittings, Lubrication Drive Type |
| MIL P 18906 : 0 | PROPELLANT GRAIN, CYLINDRICAL, FOR ROCKET MOTORS |
| MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| UU-B-368 Revision B:1992 | BINDER, LOOSE-LEAF, SPRING BACK |
| MIL-R-23811 Base Document:1963 | RECORDER ASSEMBLY (FOR TORPEDO EXERCISE SECTION MARK 64 MOD 2) |
| MIL T 25446 : D | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE |
| GG C 00129 : A NOTICE 1 | CART, CLINICAL CHART HOLDER |
| MIL-P-46036 Revision B:1973 | PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| MIL-H-9850 Revision C:1977 | HINGE, BUTT, CONTINUOUS, PIANO |
| MIL-B-37484 Base Document:1976 | BEAKER-FLASK, LABORATORY |
| GG-C-00110 Revision A:1971 | CALIPER, X-RAY TECHNIQUE |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| MIL-STD-1187 Base Document:1976 | STANDARD SIZE UNIT, INTERMEDIATE AND EXTERIOR CONTAINERS FOR MODULAR PACKAGING AND UNITIZATION ON THE 40 INCH PALLET |
| DD-S-720 Revision A:1960 | STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND |
| GG-H-1970 Base Document:1976 | HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5-1/2 INCH |
| MIL P 52955 : A | POSITION & AZIMUTH DETERMINING SYSTEM (PADS), AN/USQ-70(U) |
| MIL G 52888 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 100 KW, 50/60 HERTZ, PU-495A/G |
| MIL-L-21321 Base Document:1958 | LEAD, ELECTRICAL (STORAGE BATTERY) |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
| MIL-G-46723 Revision C:1981 | GUN, SELF PROPELLED, FULL TRACKED, 175MM, M107 & HOWITZER, SELF PROPELLED, FULL TRACKED, 8 INCH, M110A1 & M110AZ, PROCESSING FOR STORAGE & SHIPMENT OF |
| MIL-T-21674 Base Document:1958 | TEST SET MARK 177 MOD O |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| MIL-D-52840 Base Document:1975 | DETECTOR, BATCH INTERFACE |
| JJ-B-178 Revision B:1957 | BELT, ROUND (DENTAL ENGINES) |
| GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| MIL-B-29159 Revision A:1989 | BOAT SYSTEM, UTILITY, NOMINAL, 20-FOOT REINFORCED PLASTIC WITH 100-HORSEPOWER OUTBOARD ENGINE AND TRAILER |
| MIL-N-51314 Base Document:1952 | NICKEL NITRATE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-539 Revision A:1976 | CLOTH, SILK, CARTRIDGE BAG |
| MIL-P-83927 Revision B:1981 | Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037 |
| MIL-P-58102 Base Document:1978 | PLASTIC SHEET AND LAMINATES, FLEXIBLE FOR ENVIRONMENTAL PROTECTIVE STORAGE AND SHIPPING SYSTEMS |
| MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
| MIL S 43176 : C | SCREEN, LATRINE, FIRE, WATER, WEATHER AND MILDEW-RESISTANT TREATED, O.D. |
| MIL A 85097/2 : D | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), CATAPULT CARTRIDGES, MARK 198 MOD 1 AND MARK 205 MODS O AND 1 |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-R-11764 Revision A:1960 | RESISTOR, DECADE ZM-16 ()/U |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| SAE AMS R 6130 : 2001 | RUBBER, CELLULAR, CHEMICALLY BLOWN |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| MIL-G-36683 Base Document:1970 | GAGE, FRUIT AND VEGETABLE SIZING |
| MIL A 55359 : 0 | ANTENNA AS-1304 ( ) /ARN-30 |
| DDD-B-40 Revision A:1958 | BANDAGE, CANTON FLANNEL |
| MIL P 51395 : A | POWER SUPPLY, CHEMICAL AUTOMATIC ALARM, ABCA-M10 |
| NNN-P-40 Revision B:1973 | PAPER LENS |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| MIL B 18367 : 0 | BEARINGS, ROLLER, CYLINDRICAL, RADIAL AND THRUST, SPECIAL PRECISION |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| MIL-B-29165 Revision A:1982 | BUILDINGS, PREFABRICATED, PANELIZED: WOOD, ONE-ROOM, ARCTIC CLIMATE |
| MIL-T-3618 Revision C:1969 | THERMOMETER, SELF INDICATING, BIMETALLIC |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| MIL N 3451 : B NOTICE 1 | NAVIGATION SET, LAND VEHICULAR, POSITION OBTAINED BY DEAD RECKONING, PACKAGING OF |
| MIL-C-17223 Revision A:1959 | CLEANER, WELDING AND CUTTING TIP |
| MIL-G-25871 Revision B:1978 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-L-52366 Revision C:1984 | LOAD BANK, AC 0-33KW RESISTIVE |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL-B-42017 Base Document:1986 | BUR, BONE SURGERY (TUNGSTEN CARBIDE), GENERAL REQUIREMENTS FOR |
| MIL-B-15894 Revision B:1966 | BRASS: DIE CASTINGS |
| MIL-M-13786 Base Document:1954 | MOTOR, FRACTIONAL HORSEPOWER, DIRECT CURRENT AND UNIVERSAL (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). VALIDATED MAR 1965 |
| GG-S-935 Revision A:1977 | SYRINGES, HYPODERMIC, NEEDLE LOCK, GLASS, 3 ML (CC) |
| SAE AMS P 46144 : 2015 | PLASTIC SHEET, POLYCARBONATE |
| MIL-C-36416 Revision C:1978 | CENTRIFUGE LABORATORY HEMATOLOGY SMALL |
| MIL-T-53055 Revision C:1991 | TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| MIL-F-52594 Revision A:1975 | FLOODLIGHT SET, ELECTRIC, PACKAGING OF |
| MIL-P-44247 Base Document:1936 | PACK, PARACHUTIST S, AT4 ROCKET |
| MIL-S-40059 Revision E:1989 | SEPARATORS, SUSPENSION LINE, PARACHUTE |
| L-P-527 Revision B:1973 | PLASTIC SHEET, STYRENE-BUTADIENE |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-B-16924 Revision C:1972 | BLOOD RECIPIENT SET, INDIRECT TRANSFUSION |
| MIL-A-55138 Revision B:1965 | ANTENNA AT-784()/PRC |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-P-52855 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE 15 KW, 400 HERTZ AN/MJQ-15 |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| DD-B-00582 Base Document:1964 | BOTTLE, EYE IRRIGATING, ZIEGLER |
| SAE AMS P 46112 : 2002(S2015) | PLASTIC SHEET AND STRIP, POLYIMIDE |
| NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
| SAE AMS P 21922 : 2016 | PLASTIC RODS AND TUBES, POLYETHYLENE |
| SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| ASTM F 1245 : 1989 | SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD |
| MIL-P-53087 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE-DRIVE, TRAILER MOUNTED, 3KW, 60 HERTZ, AN/MJQ-32 |
| MIL-F-2763 Revision B:1966 | FILTER, LIGHT, OPTICAL INSTRUMENT, BINOCULAR |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-A-52435 Revision D:1984 | AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR |
| MIL-P-17802 Revision E:1987 | PADLOCK AND PADLOCK SETS, LOW SECURITY, KEY OPERATED, REGULAR (OPEN) SHACKLE |
| MIL A 85097/002 : 1993 | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS) CATAPULT CARTRIDGES, MK 205 MODS 0 AND 1 |
| MIL-T-3510 Revision E:1989 | TARGET, SURVEYING, BEACON [WITH CARRYING BAG] |
| GG C 00225 : A | CHEST, X-RAY FILM PROTECTIVE |
| MIL-B-52690 Revision B:1987 | BRACKET PUSHING, BOW ATTACHMENT, 12-TON PNEUMATIC HALF FLOAT |
| MIL-S-44355 Base Document:1988 | SIGN MAKING KIT, PORTABLE |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| WW-P-405 Revision B:1974 | PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED) |
| MIL-B-36446 Revision A:1973 | BURS, DENTAL SURGERY |
| MIL M 37869 : LATEST | MICROSCOPE, OPTICAL, BINOCULAR |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE |
| MIL-M-51282 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1 |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF |
| MIL P 22629 : NOTICE 3 | PRINTED WIRING BOARDS |
| MIL S 81127 : 0 | SIMULATOR LAUNCHER AND MISSILE MARK 6 MOD 2 |
| MIL-B-36268 Base Document:1964 | BEAKER, LABORATORY (POLYPROPYLENE) |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| MIL H 3586 : E | HOLDFAST ASSEMBLY CHAIN TYPE |
| AA-F-355 Revision B Interim Revision:1972 | FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED |
| MIL-T-37000 Base Document:1973 | TUBE, BLOOD COLLECTING, VACUUM, STERILE |
| O-D-210 Revision A:1976 | DESICCANT, ACTIVATED, CALCIUM SULFATE, ANHYDROUS |
| GG-D-441 Revision B:1957 | DISPENSER, STRIP, DENTAL |
| MIL-P-23242 Revision B:1982 | PLASTIC COATING COMPOUND, STRIPPABLE - ELECTROPLATING |
| MIL-C-43859 Revision A:1978 | COUPLING, EXTRACTION FORCE TRANSFER, AIRDROP |
| MIL-T-6841 Revision D:1992 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| MIL-B-36492 Base Document:1966 | BED, ORTHOPEDIC |
| MIL R 14293 : A | RESISTOR, FIXED, HIGH MEGOHM (HERMETICALLY SEALED) |
| MIL-I-5170 Revision C:1987 | INDICATOR, POSITION, HORIZONTAL STABILIZER |
| MIL-G-52552 Revision B:1981 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU656/G |
| SS-C-646 Revision B:1969 | CRAYON, MARKING, LUMBER |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MIL-G-52537 Revision C:1980 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU-375B/G |
| MMM-A-250 Revision C:1975 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| NNN C 435 : B NOTICE 1 | |
| MIL-C-37068 Base Document:1975 | CONNECTOR, ELASTIC TUBING, BRANCHED, PLASTIC, Y-SHAPED |
| MIL-G-52495 Revision B:1980 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 5 KW 60 HERTZ PU618/M |
| PPP-P-1134 Revision D:1983 | PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| GGG-B-351 Revision B:1963 | BIN, STORAGE AND DISPLAY, ROTARY |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-B-3493 Revision D:1985 | BUCKLES, END BAR WITH TONGUE (FOR LEATHER) |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| PPP-T-495 Revision B:1974 | TUBES, MAILING, AND FILING |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL C 2486 : C | CABLE, SPECIAL PURPOSE, ELECTRICAL WM-46/U |
| MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MIL S 21903 : 0 | SD-4 MOD 1 MECHANISM |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| U-C-115 Revision B:1958 | CAPSULE, GELATIN |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-T-22209 Base Document:1959 | TELESCOPE MARK 104 MOD O |
| MIL I 3166 : A NOTICE 1 | INHIBITOR, WEB AND END [PLASTIC] |
| MIL-M-55336 Base Document:1971 | MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF) |
| MIL F 10538 : E NOTICE 1 | FRAMES, STEREOPLOTTER PROJECTION MULTIPLEX [SINGLE AND DOUBLE] WITH CASE |
| MIL-I-83751 Base Document:1967 | INDICATOR, SAFETY LEVEL, RF |
| MIL-S-85510 Base Document:1981 | Seats, Helicopter Cabin, Crashworthy, General Specification for |
| MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
| MIL-P-14232 Revision E:1976 | PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| MIL-A-6425 Revision B:1959 | ADAPTOR, PRESSURE FUEL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| GG-D-465 Revision A:1977 | DISTILLING APPARATUS, LABORATORY |
| WW P 1432 : C | PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED |
| MIL R 83322 : 0 | RUBBER, CARBOXY NITROSO, NITROGEN TETROXIDE (N204) RESISTANT |
| L-C-001804 Base Document:1972 | CUSHION RING, INFLATABLE, PLASTIC |
| L-P-00315 Revision D:1976 | PIPE AND TUBING, NONMETALLIC (PLASTIC) |
| GG-B-823 Revision C:1975 | BURS, DENTURE TRIMMING, HIGH SPEED TOOL STEEL |
| MIL-F-22839 Revision D:1988 | FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| MIL-T-51398 Revision A:1979 | TEST SET, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M74 |
| MIL-D-52645 Revision A:1973 | DISTILLATION EQUIPMENT SET, WATER, THERMOCOMPRESSION TYPE, 150 GALLONS PER HOUR, PACKAGING OF |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| MIL-M-7405 Revision D:1986 | MAINTENANCE PLATFORM, AIRCRAFT, TYPE B-5A |
| MIL-C-22211 Revision A:1969 | CALIBRATOR SET, RADIO, AN/UDM-1 |
| MIL-F-85731 Base Document:1986 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-B-43716 Revision B:1985 | BAGS, PLASTIC, PROTECTIVE (GARMENT) |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-B-16540 Revision B:1969 | BRONZE, PHOSPHOR: CASTINGS |
| MIL C 82884 : 1993 | CARTRIDGE, IMPULSE CCU-69A/A |
| MIL-G-52858 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 50/60 HERTZ, PU-406B/M |
| MIL-B-37067 Base Document:1974 | BLOCK, INSECT FIXATION, DOUBLE MOUNTED, 100S |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL-B-12233 Revision E:1986 | BAGS, SAND, BURLAP & COTTON |
| MIL S 51200 : A | SAMPLING KIT, CBR AGENT, M34 |
| MIL-A-46864 Revision B:1991 | ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR |
| GG-S-00812 Revision C:1965 | SUTURES, ABSORBABLE, SURGICAL (GUT) |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| DD-M-411 Revision C:1990 | |
| UU-B-790 Revision A:1968 | BUILDING PAPER, VEGETABLE FIBER, (KRAFT, WATERPROOFED, WATER REPELLENT AND FIRE RESISTANT) |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| HH-I-435 Revision B:1977 | INSULATORS, ELECTRIC, PORCELAIN AND GLASS |
| MIL-STD-1169 Revision B:1987 | PACKAGING PACKING AND MARKING FOR SHIPMENT OF INERT AMMUNITION COMPONENTS |
| MIL-T-37046 Base Document:1974 | TROUSERS, OPERATING, SURGICAL, WOMEN'S, COTTON POLYESTER, STATIC RESISTANT |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| MIL S 14977 : B | SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET |
| MIL-R-52224 Revision D:1992 | RETAINER ASSEMBLY SLIDING |
| FF-P-101 Revision F:1984 | PADLOCK |
| MIL-G-52927 Revision A:1985 | GENERATOR SETS, GASOLINE ENGINE, TRAILER MOUNTED 3 KW, 28 VOLT DC, PU-666/G |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL-L-52430 Revision C:1991 | LIGHT, SIGNAL, SURVEYING 2 INCH & 5 INCH REFLECTORS, BATTERY POWERED WITH CASES |
| DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
| MIL-S-52561 Revision A:1972 | SUPPLEMENTARY EQUIPMENT SET, TOPOGRAPHIC PHOTOMAPPING, PACKAGING OF |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-S-14022 Revision A:1983 | SODIUM PERBORATE, TETRAHYDRATE |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING |
| MIL T 21911 : 0 | TELESCOPE MARK 115 MOD O |
| MIL-F-3222 Revision F:1991 | FLOODLIGHTS AND LANTERNS, PACKAGING OF |
| MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-P-46111 Revision C:1978 | PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT) |
| MIL-G-52636 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-625/G |
| G-M-656 Revision A:1958 | MOUNTS, RADIOGRAPHIC FILM, DENTAL |
| MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL-D-51048 Revision F:1976 | DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11 |
| MIL D 23607 : B | DISCONNECT SWITCHES, AIR OUTDOOR (7.2 KV TO 34.5 KV) |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL L 15098 : D | LAMP, GLOW |
| DD-P-00355 Revision A:1975 | PIPET, DROPPING, GLASS OR PLASTIC |
| MIL-B-37965 Base Document:1986 | BURS, BONE SURGERY (CORROSION-RESISTING STEEL) |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-M-13130 Revision C:1972 | METER, AUDIO LEVEL TS-585(/U) |
| MIL-R-37624 Base Document:1977 | RACK, TEST TUBE, LABORATORY, WINTROBE, ENAMELLED STEEL, 10 TUBE |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL-P-55151 Revision B:1973 | POWER SUPPLY PP-1104 ( )/G |
| MIL C 3297 : D | CANISTER, SMOKE M3 AND M4 FOR 155-77 SHELL |
| L-P-391 Revision D:1975 | PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS) |
| MIL C 5500 : D | CAPS, HIGH PRESSURE AIR VALVE |
| MIL-T-52296 Revision D:1983 | TRANSOM ASSEMBLY, 60 TON UNIVERSAL TRANSOM |
| SAE AMS G 25871 : 2016 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL-T-43512 Revision B:1970 | TENTS, MISSILE SYSTEM EQUIPMENT CONSOLE, (HIGH-POWER ILLUMINATOR HAWK) |
| MIL-A-52873 Base Document:1975 | ALARM SET, ANTI-INTRUSION (PSID) AN/GSG-151 |
| WW-T-825 Revision B:1971 | TUBE, MAGNESIUM-ALLOY, EXTRUDED |
| MIL-S-24584 Base Document:1978 | STOPPERS, CARPENTER AND ASSOCIATED BRIDLES (WIRE ROPE AND CHAIN LINK) |
| MIL-C-14500 Revision C:1985 | CRADLE, BOAT, STEEL |
| MIL R 52105 : D | RAMP, RAFT |
| MIL E 55585 : F | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL-E-36875 Revision A:1975 | ETHYNODIOL DIACETATE AND ETHINYL ESTRADIOL TABLETS, U.S.P. |
| MIL D 11318 : A | |
| MIL I 5184 : B | INDICATOR, POSITION |
| MIL D 37671 : NOTICE 2 | DIENESTROL CREAM, NF |
| MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| SAE AS 7997:1999 | MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR |
| MIL-I-49466 Base Document:1990 | INSULATOR; DISKS, PLATES & WASHERS GENERAL SPECIFICATION FOR |
| MIL-M-22387 Base Document:1964 | MOTOR, ALTERNATING CURRENT |
| MIL-P-70343 Base Document:1990 | PACKING, FIBERGLASS, ROPE & WICK |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| MIL T 52777 : A NOTICE 1 | TANK, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC |
| MIL-S-20386 Revision D:1977 | STEREOMETER, PHOTOGRAMMETRIC; STEREOCOMPARAGRAPH-TYPE; WITH ACCESSORIES AND CASE |
| MIL-H-22995 Revision A:1969 | HELMET SHELL ASSEMBLIES, PILOT S PROTECTIVE, APH-6 SERIES |
| MIL-T-36349 Revision A:1978 | THERMOMETER,SELF-INDICATING, BIMETALLIC DIAL 8 1/2 INCH |
| FF C 00431 : B | CLIP, PAPER (BINDER) |
| MIL-PRF-2697 Revision A:1960 | GLASS, PORTLIGHT, CIRCULAR, HEAT TREATED |
| MIL-P-29206 Revision A:1987 | PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR LIQUID PETROLEUM LINES |
| MIL-C-55169 Base Document:1962 | CONNECTORS, ELECTRIC, TYPE "Q", MULTI-CONTACT |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-V-8712 Revision A:1965 | VALVE, AIR RELIEF, LOW PRESSURE |
| MIL-L-52696 Base Document:1970 | LAMINATING RESIN |
| NNN-B-585 Revision B:1979 | BOX MICROSCOPE SLIDE PLASTIC |
| MIL-H-49225 Base Document:1980 | HEADSET MICROPHONE KIT MK-896A/AIC (COMPONENTS OF) |
| MIL-C-55172 Revision B:1972 | CABINET, ELECTRICAL EQUIPMENT, CY-3397 ( ) /G |
| MIL-C-37099 Base Document:1975 | CENTRIFUGE, LABORATORY, HAND FELD |
| NNN G 698 : C | GRID WIRE GAUZE LABORATORY |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| NNN R 560 : A | ROD STIRRING LABORATORY |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| MIL-B-43254 Revision B:1970 | BRUSH, ANIMAL GROOMING |
| MIL W 28839 : 0 | WAVEGUIDE, ELLIPTICAL GENERAL SPECIFICATION FOR |
| MIL R 37208 : 0 | RACK, TEST TUBE LABORATORY |
| MIL P 21922 : B | PLASTIC RODS AND TUBES, POLYETHYLENE |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) |
| MIL-B-44381 Base Document:1990 | BOARD, MAP, COMPLEXING (SICPS) |
| MIL-I-7063 Revision B:1979 | INDICATOR, POSITION, RUBBER TRIM TAB |
| MIL H 7750 : B | HOUSING, PARACHUTE RIPCORD |
| MIL-T-43618 Revision B:1983 | TAPE, PRESSURE SENSITIVE FOR MENDING NYLON PARACHUTE CANOPIES |
| JJ-S-750 Revision A:1967 | STRAP, WEBBING |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| RR-P-1352 Revision C:1989 | PARTITION, TOILET, COMPLETE |
| MIL-R-51198 Base Document:1964 | REPAIR KIT, CBR AGENT SAMPLING & ANALYZING KIT, M32 64 |
| GG-R-1638 Revision A:1985 | REMOVAL, DENTAL CROWN (SIMPLEX) |
| MIL-B-37409 Base Document:1976 | BOX, INSECT, SPECIMEN |
| MIL-I-19166 Revision C:1963 | INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE |
| MIL-W-52663 Revision A:1075 | WATER PRETREATMENT DECONTAMINATION SET, CB AGENTS, PACKAGING OF |
| GG-R-1549 Revision A:1986 | |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| AA-S-75 Revision A:1975 | SAFE, DENTAL X-RAY FILM PROTECTIVE |
| MIL-P-53069 Base Document:1987 | POWER PLANT, DIESEL ENGINE, TRAILER MOUNTED 200 KW, 60 HERTZ AN/MJQ-11A |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-C-43153 Base Document:1963 | CLOTH, CARTRIDGE, POLYESTER & VISCOSE RAYON (FOR CARTRIDGE BAGS) |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) |
| DOD P 63975 : 0 | PRIMER, ELECTRIC, PA520 |
| CCC-W-51 Revision D:1975 | WADDING, COTTON, SURGICAL |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| MIL-C-20634 Revision D:1985 | CASE DRAWING BOARD AND PLANETABLE BOARD, 15-BY 20-INCH |
| MIL-C-426 Revision B:1968 | CARRIER, TIMBER, HANDLED |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL-S-37849 Base Document:1977 | SODIUM FLUORIDE SOLUTION USP |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-S-22824 Revision E:1993 | SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING) |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| MIL C 0052876 : C | CABINETS, MONITOR, CY 7359/FSS 9(V) AND CY 7361/FSS 9(V) |
| MIL-B-17397 Revision D:1983 | BITTS, CLEATS, AND CHOCKS |
| MIL-S-81591 Base Document:1968 | Steel, Investment Castings, Carbon and Corrosion Resisting |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL S 25073 : 0 | |
| MIL-P-2911 Revision A:1957 | PACKING, ASSEMBLY, HYDRAULIC CONICAL AND V TYPES |
| MIL-C-36351 Revision B:1971 | CETYLPYRIDINIUM CHLORIDE SOLUTION ALCOHOLIC 0-05 PERCENT |
| MIL M 21602 : 0 | MOTOR, PROPULSION, DIRECT CURRENT |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| MIL-G-52902 Revision A:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, PU-751/M |
| GG-S-928 Revision B:1950 | |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL |
| SAE AS 22805 : 1999 | SPRAY KIT, SELF PRESSURIZED |
| MIL-P-7204 Revision B:1970 | POWER SUPPLY, 28 VOLT TYPE B 9 |
| O-D-1271 Revision B:1985 | DIETHYLENETRIAMINE, TECHNICAL |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL-B-23306 Revision B:1985 | BINOCULAR, SHIP, 20-POWER AND ACCESSORIES |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-P-53088 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE DRIVEN, TRAILER MOUNTED, 3KW, 60 HERTZ |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| MIL-T-55659 Base Document:1971 | TEST FACILITIES KIT, MK-994()/AR (UNITS OF) |
| MIL C 36807 : NOTICE 1 | |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| MIL J 83010 : B NOTICE 1 | JACK, AIRCRAFT LANDING GEAR MMU-87/E, 35-TON CAPACITY |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL-C-50446 Revision A:1981 | CASE, CARTRIDGE, 40MM, M118 PARTS FOR |
| MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
| MIL B 43021 : E | BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY |
| NNN-S-750 Base Document:1962 | STAND LABORATORY APPARATUS SUPPORT |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-T-45277 Base Document:1973 | TRANSMITTER, INDUCTION COMPASS T-611 (/ASN) |
| MIL-C-19062 Revision C:1977 | CONTROL CABLE ASSEMBLIES AND CONNECTOR PLUGS AND RECEPTACLES (FOR TORPEDOES) |
| GG S 00928 : C | SYRINGE, METAL, EAR |
| MIL-S-52547 Revision A:1974 | SUPPLEMENTARY EQUIPMENT, MAINTENANCE COMPANY, PACKAGING OF |
| MIL C 17-112 : A | CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304 |
| MIL-S-44221 Revision A:1989 | STAND, CANTEEN CUP |
| QQ-Z-301 Revision C:1964 | ZINC SHEET AND STRIP |
| GG C 00289 : NOTICE 1 | CHISELS, DENTURE-TRIMMING |
| MIL-A-4864 Revision A:1960 | ALUMINUM WOOL |
| MIL-C-43011 Revision A:1978 | CARRYING CASE, TEST SET, SOIL TRAFFICABILITY |
| MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
| MIL-D-537 Revision F:1992 | DISKS, COLOUR STANDARDS |
| MIL-B-12841 Revision B:1970 | BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| GG-M-105 Revision D:1977 | MALLET, ORAL SURGERY |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF |
| MIL-B-36777 Revision A:1971 | BLOWTORCH, ALCOHOL |
| GG-B-2043 Base Document:1977 | BRUSH, SURGICAL SCRUB |
| MIL-P-27965 Base Document:1967 | PLOTTING SET, THEODOLITE ML-625/GM |
| MIL-S-13943 Revision B:1983 | SODIUM SULFATE, ANHYDROUS, TECHNICAL |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| MIL R 196 : C | REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF |
| MIL C 572 : G | CORD, YARNS AND MONOFILAMENT ORGANIC SYNTHETIC FIBER |
| MIL-C-496 Revision D:1992 | CLIP, END, STRAP |
| MIL F 11543 : B | FLUXMETER TS-15()/AP |
| MIL-S-58112 Base Document:1989 | SLING, MULTI LEG, HELICOPTER, EXTERNAL CARGO |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL A 3962 : E | ANCHORS, GROUND, ARROWHEAD WITH DRIVING EQUIPMENT |
| MIL-A-52401 Revision B:1974 | ADAPTER, ARCTIC, DRIVE-TYPE PICKET |
| MIL-C-11782 Revision C:1967 | CAMOUFLAGE NET DRAPE SETS, PACKAGING OF |
| MIL-P-21325 Revision A:0196 | POWER SUPPLY FOR TEST SET MARK 281 MOD O |
| MIL-H-14040 Base Document:1965 | HEADPIECE, COLLECTIVE PROTECTOR, HOSPITAL, M13 |
| MIL C 62327 : A NOTICE 1 | CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-36637 Revision B:1976 | PIPETTING MACHINE, SEMI AUTOMATIC |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-S-52697 Revision A:1975 | SURVEYING CONTROL SECTION TRUCK MOUNTED PACKAGING OF |
| MIL-R-83283 Revision A:1991 | RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| O-S-576 Revision F:1967 | SODIUM BICARBONATE, TECHNICAL |
| MIL-L-2045 Revision B:1966 | LOOP, STRAP FASTENER [FOR NONEQUIPAGE ITEMS] |
| MIL-I-50711 Base Document:1970 | IRON BASE SINTERED METAL BARS (OIL PREGNATED) |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-L-36296 Base Document:1964 | LABEL TAPE, PRESSURE SENSITIVE ADHESIVE KEEP OUT OF REACH OF CHILDREN, LEGEND |
| SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
| MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
| MIL-P-52200 Revision C:1992 | PONTOON BOAT, HALF SECTION, ALUMINUM HULL, SPOON BOW |
| SAE AMS G 25667 : 2016 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| ASTM F 957 : 1991 : R2001 | Standard Specification for Gong, Sound Signaling |
| ASTM F 957 : 1991 : R2012 | Standard Specification for Gong, Sound Signaling |
| SAE AS 85376 : 2007 | STAND, SHIPBOARD, HELICOPTER MAINTENANCE |
| ASTM PS 106 : 2001 | Provisional Standard Specification for Rods and Tubes of Polyethylene (PE) |
| ASTM F 1312 : 1990 : R2013 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| MIL-G-12803 Revision C:1989 | GASKET MATERIAL, NON-METALLIC |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| SAE AMS I 538 : 2016 | INSULATION, ELECTRICAL, PASTED-MICA |
| SAE AMS R 83285 : 2011 | RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE |
| MIL C 22627 : 0 | COATING, CONFORMAL, RESIN |
| MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-P-52650 Revision A:1975 | PLOTTING INSTRUMENT SET, STEREOPLOTTER, MULTIPLEX LABORATORY, PACKAGING OF |
| MIL-R-7575 Revision C:1966 | Resin, Polyester, Low-Pressure Laminating |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| PPP-P-001944 Base Document:1976 | PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE |
| MIL-C-3600 Revision E:1991 | COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
| ASTM F 1312 : 1990 : R1997 | Standard Specification for Brick, Insulating, High Temperature Fire Clay |
| MIL-S-51173 Revision A:1964 | SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2 |
| MIL-S-52729 Base Document:1972 | SURVEYING SET, ASTRONOMIC POSITION, PACKAGING OF |
| MIL R 83397 : A | RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT |
| MIL-H-37082 Base Document:1974 | HYDROMETER, GRADUATED SCALE, Specific Gravity Range 1.196 to 1.286 |
| MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
| MIL-R-2327 Revision F:1972 | RING, CONNECTING, ROUND |
| MIL H 26633 : C | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN |
| MIL-P-50060 Base Document:1959 | PAPER, CONGO RED. |
| MIL-F-21241 Base Document:1958 | FILTER, COLOR, FINISHED (FOR OPTICAL INSTRUMENTS) |
| MIL-C-1410 Revision F:1985 | CHAIN, HOOK AND RING ASSEMBLY, TENT |
| MIL I 25725 : A | INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8 |
| MIL-B-37036 Revision A:1985 | BUR, DENTAL, FINISHING (TUNGSTEN CARBIDE) |
| MIL-I-51175 Base Document:1964 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMORED VEHICLE, AMBULANCE M37 |
| MIL-T-37318 Base Document:1976 | TEST TUBE, 16 BY 135 MM SCREW CAP DISPOSABLE |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL-C-51355 Revision A:1979 | CARTRIDGE, 40 MM, CS, M651 |
| TT-I-554 Revision A:1956 | INK, STAMP-PAD, RED, FOR PHOTOGRAPHIC PRINTS |
| MIL-B-543 Revision G:1990 | BUCKLE, TONGUELESS AND WEB STRAP |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| MIL-T-12242 Revision A:1963 | TEST SET, TELEPHONE TS-716( )/U |
| PPP-B-1980 Base Document:1977 | BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF |
| MIL T 55095 : 0 | TEST SET, SERVO MODULATOR |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| MIL-L-2638 Revision D:1975 | LACQUER, VINYL RESIN, GASOLINE AND WATER RESISTANT |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-G-21032 Revision D:1972 | GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5 |
| MIL-P-7206 Revision B:1970 | POWER SUPPLY, SILICON RECTIFIER TYPE B 8 |
| HH P 1784 : NOTICE 1 | PAPER, ASBESTOS |
| MIL-M-6404 Revision A:1965 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT LIQUID, TYPE F 1 AIRCRAFT FUEL 300 GALLONS PER MINUTE |
| MIL-B-36630 Base Document:1970 | BOX, MICROSCOPE SLIDE, PLASTIC, 5 SLIDE |
| MIL-A-36080 Revision C:1965 | ANESTHESIA SET, ENDOTRACHEAL |
| MIL-I-37668 Base Document:1977 | IOPANOIC ACID TABLETS, USP |
| NNN-T-360 Revision B:1976 | TISSUE GRINDER TENBROECK |
| MIL-M-51113 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, AIRCRAFT, ABC-M24 |
| GG-P-125 Revision B:1973 | PEN, RULING, DRAFTMANS: CONTOUR SWIVEL ACTION |
| MIL-B-3630 Revision D:1983 | BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| GG-S-328 Revision B:1958 | SHIELDS, EYE SURGERY |
| MIL-M-19261 Base Document:1956 | METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE |
| MIL-D-52665 Base Document:1969 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, PHOTOMAPPING COMPANY, PACKAGING OF |
| MIL-N-634 Revision C:1977 | NAVIGATOR, PLOTTING INSTRUMENT SET AND PLOTTING INSTRUMENTS |
| GG-B-00596 Revision B:1970 | BOUGIE, EUSTACHIAN, SET OF FIVE |
| MIL-S-36230 Base Document:1964 | SLEEVE, PLASTIC, HISTOPATHOLOGICAL SPECIMEN |
| MIL-P-6063 Revision B:1978 | PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR |
| MIL-H-36364 Revision B:1990 | HOLDER, RADIAC DETECTING ELEMENT, FILM BADGE TYPE |
| GG-N-00195 Revision B:1972 | NEEDLE, HYPODERMIC, BLOOD COLLECTING, DOUBLE-POINTED, DISPOSABLE |
| NNN T 792 : A NOTICE 1 | TUBE DRYING LABORATORY |
| L-P-1036 Revision A:1974 | PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL CHLORIDE, RIGID |
| MIL-C-3993 Revision C:1962 | COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| MIL T 4 : L | TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF |
| MIL-A-25081 Base Document:1955 | AMPLIFIER, ELECTRONIC CONTROL, 2 CHANNEL, APPROACH AND NAVIGATIONAL, TYPE MB-4 |
| MIL C 83867 : B | CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE |
| MIL-T-5684 Revision B:1981 | TIE RODS; ROUND AND SQUARE, AIRCRAFT |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| MIL B 003473 : A | BEAD, LABORATORY, GLASS |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET & STRIP, POLYMIDE |
| MIL-W-3318 Revision A:1971 | Wire, Copper, and Wire, Steel, Copperclad W-154 and WS-24/U (No S/S Document) |
| NNN-T-580 Base Document:1963 | TONG LABORATORY |
| MIL-M-5793 Revision A:1954 | MICROPHONE M-3A/A |
| QQ-N-288 Base Document:1956 | NICKEL-COPPER ALLOY AND NICKEL-COPPER-SILICON ALLOY CASTINGS |
| GG-B-00686 Revision D:1973 | BROACHES, PULP CANAL, BARBED, DENTAL |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL S 9479 : C | |
| MIL L 61002 : 0 | LABELS, PRESSURE-SENSITIVE ADHESIVE, FOR BAR CODES AND OTHER MARKINGS |
| L-P-393 Revision A:1964 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION |
| MIL P 36722 : C | PIPET, VOLUMETRIC, MICRO |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| L T 0030 : NOTICE 1 | TAB, SIGNAL, PLASTIC, TAB SET, SIGNAL, PLASTIC |
| MIL-R-37198 Base Document:1975 | READER, MICROHEMATOCRIT, SPIRAL TYPE |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL T 6349 : C NOTICE 1 | TEST SET, SYNCHRO |
| MIL W 43334 : B | WEBBING AND TAPE, TEXTILE, PACKAGING AND PACKING OF |
| MIL-B-16305 Revision B:1964 | BRICK, REFRACTORY, INSULATING |
| MMM-A-187 Revision B:1968 | ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| MIL-T-10086 Revision H:1980 | TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| MIL-C-52669 Base Document:1969 | COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL-C-1453 Revision G:1990 | CHAIN, DOG, WITH SNAPHOOK |
| MIL-H-36973 Base Document:1973 | HOLDER, LABORATORY NEEDLE, INNOCULATING KOLLE, 10 INCH |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| NNN-B-300 Revision A:1977 | BLOOD COLLECTING CULTURE UNIT LABORATORY |
| MIL-B-36633 Base Document:1970 | BONE SURGERY SET, EXTENSION AND TRACTION, PIN TYPE, STEINMANN |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| MIL-G-52903 Revision A:1985 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 10 KW, 60 HERTZ, PU-753/M |
| DOD-B-53061 Base Document:1985 | BELTS, V: POLYURETHANE |
| MIL A 22641 : D | ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| GG-F-00340 Revision A:1966 | FILIFORMS; URETHRAL, WOVEN (BRAIDED) |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL-B-2029 Revision F:1983 | BURNER ASSEMBLY, SPACE HEATER |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL C 8783 : A | CLAMP, HOSE, FLAT BAND 500 DEG. F |
| MIL-T-12756 Revision A:1959 | TEST SET, BATTERY TESTER TS-183()/U |
| MIL-M-81999 Revision A:1977 | Molding Compound, Reversion Resistant, Non-Carcinogen Curing Polyurethane, Aircraft Structure |
| MIL C 1213 : E | CUPS, GREASE |
| MIL-P-44412 Base Document:1990 | PACK, PARACHUTISTS, STINGER MISSILE |
| NNN-G-692 Revision C:1970 | GRADUATE LIQUID LABORATORY AND PHARMACEUTICAL GLASS |
| MIL-A-36051 Revision A:1973 | |
| GG-C-00620 Revision F:1976 | COUNTER, RECIPROCATING, HAND HELD |
| DD-G-511 Revision E:1983 | GLASS, TUBING, ROUND |
| MIL-W-52874 Revision B:1983 | WATER QUALITY ANALYSIS SET, ENGINEER |
| MIL-S-51141 Revision A:1967 | SUIT, PROTECTIVE, IMPERMEABLE, SUPPLIED AIR, M4 |
| MIL-A-36163 Base Document:1963 | AIRWAY, PHARYNGEAL, RUBBER |
| MIL-S-2609 Revision D:1968 | SIGN BOX, INTERIOR ILLUMINATED, ELECTRIC [4 INCH BY 15 INCH MESSAGE] |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-C-47150 Base Document:1974 | COMPOUND, COATING, PORCELAIN FOR POTTING ELECTRONIC COMPONENTS |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL-C-36858 Revision A:1978 | |
| MIL-A-3327 Revision A:1993 | ARCH SUPPORT |
| MIL P 19468 : A | PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED & EXTRUDED |
| MIL-B-13501 Revision D:1991 | BEARINGS AND BUSHINGS, BRASS AND BRONZE, MACHINED OR FORMED |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| JJ-B-00178 Revision C:1957 | BELTS, ROUND, DENTAL ENGINE |
| MIL-S-37073 Base Document:1974 | STAND, DISTILLING APPARATUS, LABORATORY |
| GGG-P-453 Revision A:1965 | PLATE, SURFACE, CAST IRON |
| DDD-P-52 Base Document:1959 | PAD, CLOTH, COPPER SULFATE IMPREGNATED |
| MIL S 18737 : 0 | SIGNAL LIGHT, PISTOL CARTRIDGE, MK 2 (WHITE) MK 2 (GREEN, & MK 2 (RED) |
| MIL-P-82530 Base Document:1968 | PRIMER, ELECTRIC MARK 137 MOD 0 |
| MIL-R-12499 Revision C:1967 | REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF |
| MIL G 0012327 : H | GRENADE, HAND, SMOKE H |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL-C-43157 Base Document:1963 | CLOTH, SPUN VISCOSE RAYON RESIN IMPREGNATED |
| MIL-D-85866 Base Document:1990 | DELAY COMPOSITION, Z-1 |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL A 18924 : 0 | ARMING CELLS MK 1 MODS 5, 6, 7, AND 8. |
| MIL H 24653 : 0 | HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
| MIL-L-12197 Revision F:1993 | LADDER, FIRE, EXTENSION, LADDERS, FIRE, SINGLE, AND LADDERS, FIRE, A-FOLDING EXTENSION |
| MIL-S-6551 Revision A:1981 | |
| PPP-P-40 Revision C:1998 | PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY |
| MIL M 81380 : C | MONITOR, CONTAMINATION, FUEL DISPENSING SYSTEM |
| GG-H-166 Revision B:1958 | |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| MIL-P-50039 Base Document:1959 | PAPER, NITRAZINE |
| HH-P-46 Revision E:1975 | PACKING; ASBESTOS, SHEET, COMPRESSED |
| MIL-S-3404 Revision C:1975 | SURVEYING SET, PRECISE BASELINE, SPECIALIZED SET FOR FIRST ORDER ACCURACY, PACKAGING OF |
| MIL-A-38346 Revision D:1970 | AIR CONDITIONER A/E32C-25 |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-F-36674 Base Document:1970 | FLASK, VOLUMETRIC, PLASTIC |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL-A-36247 Revision A:1970 | AUDIOMETER, AUTOMATIC |
| MIL-H-43048 Revision B:1981 | HOOD, FLEXIBLE, GASOLINE RESISTANT, PROTECTIVE |
| MIL-C-12539 Revision B:1960 | CHARGER, BATTERY, METALLIC, POWER UNIT, PP-34/MSM |
| RR-K-795 Revision A:1974 | KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| GG-O-635 Revision A:1977 | OPTICAL FLATS |
| GG-S-001015 Revision A:1969 | SYRINGE, FOUNTAIN |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MIL-C-49468 Base Document:1990 | CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL-I-22027 Base Document:1959 | IGNITER, JET ENGINE, MK 243 MOD 2 |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| MIL-C-17112 Revision A:1973 | COPPER-NICKEL-ZINC ALLOY (NICKEL-SILVER): CASTINGS |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-I-19632 Revision B:1960 | INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND RAG PAPER |
| MIL-A-25915 Revision A:1980 | ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2 |
| AA-D-170 Revision A:1976 | DESK, FLAT TOP |
| GG-C-00439 Revision C:1975 | CLIP, SUTURE, MICHEL, 16 MM |
| MIL H 3780 : C NOTICE 1 | HANGER AND TRACK SETS, HORIZONTAL SLIDING DOOR |
| MIL-S-20660 Revision C:1977 | STEREOSCOPE, LENS-PRISM-MIRROR, AERIAL PHOTOGRAPH INTERPRETATION (WITH BINOCULARS AND CASE) |
| FF-P-00416 Revision F:1971 | PIN, SAFETY |
| MIL-C-52299 Revision D:1991 | CLAMP ASSEMBLY, TRESTLE BRACING |
| MIL-C-44046 Revision A:1981 | CONTAINER, HIGH SPEED, AERIAL DELIVERY |
| MIL-I-46437 Revision B:1970 | IGNITER, DOCUMENT DESTROYER, INCENDIARY, M25 |
| MIL-P-5610 Revision D:1968 | PARACHUTE ASSEMBLIES AND MAJOR SUB-ASSEMBLIES, PACKAGING AND PACKING OF |
| MIL-P-8853 Base Document:1958 | PASTE, COPPER BRAZING, WATER THINNING |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| MIL-D-11381 Revision E:1977 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, HEADQUARTERS AND SERVICE COMPANY, PACKAGING OF |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| MIL S 52792 : 0 | SURVEY SET, HYDROLOGY, PACKAGING OF |
| DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS |
| MIL-S-22805 Revision B:1993 | SPRAY KIT, SELF PRESSURIZED |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HAND-HELD |
| SAE AS 85080 : 2012 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| MIL-C-43899 Revision A:1985 | COUPLING, EXTRACTION FORCE TRANSFER, PLATFORM |
| MIL-B-36275 Revision A:1976 | BOX, SHIPPING, HISTOPATHOLOGICAL SPECIMENS, DISPOSABLE |
| HH-I-525 Revision A:1968 | INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B) |
| MIL-S-19819 Revision C:1974 | SWITCH, FIRING, MARK 8 MOD O AND 1 (INERTIA) FOR EXPLODER MECHANISM MARK 19 SERIES |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-T-37638 Revision A:1978 | TEST TUBE, 12 BY 75 MM POLYSTYRENE DISPOSABLE |
| MIL-G-36721 Base Document:1970 | GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING |
| MIL-A-36494 Base Document:1966 | AUDIOMETER, PORTABLE |
| MIL-A-37270 Base Document:1976 | ARCH BOARD FILE AND BOX, PRESCRIPTION FILING |
| MIL-S-24660 Base Document:1985 | Sprinkler Head, 180 Degrees Full Cone |
| MIL C 55040 : B NOTICE 1 | CABLE, SPECIAL PURPOSE, ELECTRICAL (RETRACTILE) |
| MIL-B-43542 Revision B:1985 | BOOT, DOG |
| MMM-A-185 Revision B:1974 | ADHESIVE RUBBER (FOR PAPER BONDING) |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-S-36177 Base Document:1964 | SACK, SHIPPING, PAPER |
| MIL-A-21672 Base Document:1958 | ARMING CELL MARK 2 MODS 1 AND 2 |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| MIL K 36311 : C NOTICE 1 | KNIVES, MICROTOME |
| MIL-P-46121 Revision B:1977 | ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| MIL-V-62038 Revision E:1988 | VEHICLE, WHEELED, PREPARATION FOR SHIPMENT AND STORAGE OF |
| L-P-375 Revision D:1994 | PLASTIC FILM, FLEXIBLE, VINYL CHLORIDE |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| GG-H-0080 Revision A:1967 | HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE |
| MIL-R-81158 Revision A:1966 | REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1) |
| MIL-B-43666 Revision D:1986 | BOXES, SHIPPING, CONSOLIDATION |
| MIL-P-71093 Base Document:1992 | POWDER, IGNITION, GASLESS, F-33B |
| MIL-E-3677 Revision D:1993 | ERECTION EQUIPMENT FOR BRIDGE, FIXED, STEEL PANEL, BAILEY TYPE |
| MIL-G-3787 Revision G:1976 | GLASS, LAMINATED, FLAT [EXCEPT AIRCRAFT] |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
| MIL-R-51397 Revision C:1981 | REFILL KIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M229 |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING |
| MIL T 18752 : NOTICE 1 | TRACER MARK 5 MOD 1 |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| GG-B-00821 Revision E:1976 | BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE |
| MIL-A-52759 Base Document:1973 | ANTI-TANK MINE DISPENSING SYSTEM, PACKAGING OF |
| MIL H 18288 : 0 | HOSE AND HOSE ASSEMBLIES, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| NNN D 350 : A NOTICE 1 | DISH GUM TEST |
| DD-B-601 Base Document:1959 | BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITRES |
| NNN-T-698 Base Document:1963 | TRIPOD LABORATORY APPARATUS |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| ASTM F 1182 : 2007 : R2013 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL-S-58095 Revision A:1986 | SEAT SYSTEM: CRASH RESISTANCE, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| L R 00350 : A | RIBBONS, TYPEWRITER AND COMPOSING MACHINE, CHANGEABLE TYPE STYLE, POLYETHYLENE |
| MIL-G-46382 Base Document:1963 | GAGE, SNAP, THREAD ROLL |
| MIL-N-51301 Base Document:1969 | NICKEL CHLORIDE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-G-52538 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 10KW 60 HERTZ PU-332A/G |
| MIL-A-51312 Base Document:1969 | ANTIMONY TRIOXIDEM, ANALYZED REAGENT |
| MIL W 23351 : A | WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR |
| MIL-S-52781 Revision A:1979 | STRIP, MARKING, ALUMINUM |
| MIL-T-55335 Base Document:1971 | Test Facilities Kit, MK-1191( )/AR (Units of) (No S/S Document) |
| MIL R 83725 : B | RELAY, VACUUM, GENERAL SPECIFICATION FOR |
| MIL T 38230 : B (1) | TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| GG R 001638 : NOTICE 1 | REMOVAL, DENTAL CROWN, SIMPLEX |
| MIL-C-62074 Revision C:1985 | CHASSIS, WEAPON, FULL-TRACKED, M741, AND M741A1; PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG S 00176 : C | SCREEN, X-RAY INTENSIFYING |
| NNN E 00920 : B | EXTRACTION ASSY |
| MIL-B-43119 Revision B:0197 | BRACKET, M21 REEFING LINE CUTTER, CARGO PARACHUTE CANOPY |
| MIL-B-36470 Base Document:1966 | BASKET, PIPET, PLASTIC |
| DDD-D-00620 Base Document:1965 | DRAPE, SURGICAL, PLASTIC, STERILE 18 BY 36 INCHES |
| MIL-N-36124 Revision B:1975 | NEEDLES, HYPODERMIC, DISPOSABLE |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| HH-I-545 Revision B:1971 | INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL) |
| MIL-W-19088 Base Document:1955 | WATTMETER, SWITCHBOARD TYPE 4-1/2 INCH |
| QQ-W-390 Revision C:1970 | WIRE, NICKEL-CHROMIUM-IRON ALLOY |
| PPP-C-850 Revision D:1964 | CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES) |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL-I-6514 Revision B:1988 | INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C |
| MIL-S-51201 Revision A:1969 | SAMPLING & ANALYZING KIT, CBR AGENTS, M19 |
| KK-W-266 Revision A:1961 | WHEEL, BUFFING, CHAMOIS, 3 INCH |
| MIL-T-46114 Revision B:1978 | TAPE, GLASS-SETTING, RUBBER, UNCURED (FOR SEALING GLASS WINDOWS) |
| LLL-C-83 Revision B:1977 | CANES, WALKING |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| MIL-M-36314 Revision B:1976 | MICROTOME, ROTARY, AUTOMATIC |
| MIL-P-18177 Revision C:1960 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY RESIN |
| MIL-B-45977 Revision B:1990 | BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF |
| GG-S-773 Revision D:1978 | STRAIGHTEDGES: PLASTIC AND WOOD |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| MIL W 30508 : 0 | WIRE, ARMATURE BANDING |
| NNN-D-340 Revision A:1962 | DISH EVAPORATING NON METALLIC |
| MMM-A-1058 Revision A:1975 | Adhesive, Rubber Base, (in Pressurized Dispensers) |
| MIL-J-36511 Base Document:1966 | JAR, PIPET, PLASTIC |
| MIL-P-43604 Revision A:1971 | PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| MIL-L-43693 Revision A:1991 | LOWERING DEVICE, PERSONNEL AND CARGO |
| MIL-S-55062 Base Document:1959 | SUPPORT, ANTENNA AB-461 ( ) GL |
| MIL-B-36162 Revision C:1987 | BLADES, LARYNGOSCOPE, MILLER |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL W 85 : G | WAVEGUIDE RIGID RECTANGULAR GENERAL SPECIFICATION FOR |
| MIL-C-87032 Revision B:1986 | COVERALLS DIVER'S (MK-12) |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| UU T 54 : E | TAB, INDEX, GUMMED |
| MIL-D-87030 Revision B:1986 | DIVER DRESS SUIT (MK 12) |
| GG-H-1212 Revision A:1975 | HAMMER, REFLEX TESTING, TAYLOR |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| MIL-S-13282 Revision B:1973 | SILVER AND SILVER ALLOYS |
| MIL-B-36893 Revision A:1975 | BRONCHOSCOPE, FIBER OPTIC, HOLINGER |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| MIL D 5480 : F | DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR |
| GG-L-00110 Revision A:1971 | LANCET, FINGER BLEEDING |
| MIL-G-52627 Revision A:1971 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5KW 60 HERTZ PU-409A/M |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| MIL-P-19918 Base Document:1952 | PACKING, V RING |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| MIL-M-13787 Base Document:1954 | MOTOR, ALTERNATING CURRENT, FRACTIONAL HORSEPOWER, SQUIRREL CAGE (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| MIL-A-25463 Revision B:1982 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-I-695 Revision B:1969 | INSULATION, ELECTRICAL, PAPER [SLOT CELL] |
| MIL-S-14197 Revision B:1977 | STUD, PHOTOGRAMMETRIC SLOTTED TEMPLETS |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
| MIL-B-36538 Revision A:1974 | BAG, BUCKSHOT |
| ZZ-C-730 Revision A:1973 | CUPS AND GLIDES, FURNITURE |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL F 6001 : A | FITTING, AIRCRAFT, SOLDER TYPE TUBE |
| GG-S-325 Base Document:1961 | SHIELD, EYE, SURGICAL, FOX |
| MIL-P-37748 Base Document:1978 | PSYCHROMETER, SLING |
| MIL-P-36907 Revision A:1976 | PIPET-DILUENT, BLOOD, LABORATORY |
| MIL-G-1086 Revision E:1975 | GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS] |
| LLL-S-720 Revision A:1974 | STIRRING STICK, BEVERAGE (WOOD) |
| L-P-315 Revision C:1972 | PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR) |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-A-5540 Revision B:1967 | ADHESIVE, POLYCHLOROPRENE |
| U-T-00190 Revision A:1964 | TEST PAPER AND COLOR CHART, GLUCOSE IN URINE, 100 TABLETS |
| MIL-A-36644 Base Document:1970 | APPLICATOR SET, PIN RETENTION, DENTAL |
| MIL R 39032 : D | RESISTOR, PACKAGING OF |
| MIL-T-37594 Base Document:1977 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, INCUBATOR, O DEGREES TO 70 DEGREES C |
| MIL-C-16385 Revision E:1972 | CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE |
| MIL M 3996 : C | MATTRESSES (EXCEPT PNEUMATIC TYPE), PACKAGING AND PACKING OF |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| MIL-V-8965 Revision B:1990 | VALVE CORE, OXYGEN, HIGH PRESSURE |
| MIL-D-45503 Revision A:1961 | DRIVE, HYDRAULIC, T46 |
| MIL-F-36748 Base Document:1971 | FUNNEL, COMMON, LABORATORY POLYETHYLENE, OUTSIDE RIBBED |
| MIL E 44258 : A | ELECTRICAL DISTRIBUTION ASSEMBLIES FOR TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER) |
| MIL S 23769 : C | SEAL, SECURITY |
| MIL S 43243 : C | SEPARATOR, PARACHUTE REMOVABLE CONNECTOR LINK |
| AA-C-00288 Revision B:1968 | CHAIRS, FOLDING, WOOD, WITHOUT ARMS |
| MIL-B-44418 Base Document:1991 | Boot Wall, Fabric Assemblies, Standardized Integrated Command Post System (SICPS) (No S/S Document) |
| MIL-T-36966 Revision A:1978 | TUBING, NONMETALLIC, RUBBER |
| MIL-M-50974 Revision C:1983 | MOTOR DETONATOR ASSEMBLY, ROCKET, LOADING ASSEMBLING AND PACKING (FOR DEMOLITION KIT, CRATERING M180) |
| GG-R-563 Revision B:1957 | ROLL, ABSORBENT COTTON AND ROLL, CELLULOSE |
| HH-P-119 Revision A:1967 | PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER |
| MIL-F-27656 Revision C:1987 | Filter Unit, Fluid, Pressure, MXU-408/M, Absolute, 5 Micron, Hydraulic |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-B-43308 Revision B:1969 | BINDING MACHINE, PLASTIC BINDING ELEMENT, AND PUNCHING MACHINE PAPER |
| MIL-S-43012 Revision C:1988 | SAMPLER, SOIL |
| MIL-D-36622 Base Document:1970 | DISH, BIOLOGICAL PREPARATION [STENDER DESIGN] |
| MIL S 11086 : D NOTICE 1 | STRAP, HOSE, AND LADDER |
| MIL T 15659 : H | TERMINAL, LUG, SOLDER, COPPER AND PHOSPHOR BRONZE |
| MIL-P-52455 Revision A:1970 | PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES |
| MIL-C-172 Revision C:1958 | CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT) |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL-A-36955 Base Document:1973 | ANOSCOPE, FANSLER, 6 CM. |
| MIL-W-52815 Base Document:1974 | WASHER: INSULATING, FOR SPLIT-KNOB TYPE ELECTRICAL INSULATOR |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| HH-P-41 Revision D:1986 | PACKING, ASBESTOS, ROPE AND WICK |
| NNN-B-001291 Base Document:1996 | BASKET TEST TUBE |
| MIL-T-47051 Revision A:1974 | TUBING, HEAT SHRINKABLE |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| MIL-L-52052 Revision D:1980 | LIFE PRESERVER, PARACHUTIST TYPE B-7 |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| NNN-G-690 Base Document:1963 | GRADUATE LIQUID LABORATORY PLASTIC |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| GG-P-118 Revision C:1975 | PARALLEL RULER, FOLDING TYPE |
| MIL-C-55398 Base Document:1973 | COMPENSATOR, MAGNETIC FLUX CN-405 ( )/ASN |
| MIL B 197 : F INT AMD 2 | BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF |
| MIL-G-52647 Base Document:1969 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 60 KW, 400 HERTZ, PU-707/M |
| GG-B-426 Revision B:1960 | BLOCK, BITE |
| DD-G-451 Revision D:1977 | GLASS, FLOAT OR PLATE, SHEET, FIGURED (FLAT, FOR GLAZING, MIRRORS AND OTHER USES) |
| AA-B-60 Base Document:1959 | BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL |
| MIL-W-52686 Revision B:1983 | WELDING SET, ARC, INERT GAS SHIELDED PACKAGING OF |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL-P-44012 Revision A:1979 | PACK, PARACHUTIST'S, DRAGON MISSILE |
| MIL-S-55094 Base Document:1960 | STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERFECTION TESTING |
| MIL-T-43238 Revision C:1984 | TABLE, SHADOW, PARACHUTE CANOPY INSPECTION |
| MIL-T-20193 Revision D:1978 | TABLE, STEREOPLOTTER, PROJECTION: MULTIPLEX, WITH CHEST |
| MIL-C-10597 Revision E:1983 | CLEANING COMPOUND WITH CONDITIONER AND INHIBITOR FOR ENGINE COOLING SYSTEMS |
| GG-P-115 Base Document:1988 | PARACHUTE, METEOROLOGICAL |
| MIL-S-82489 Base Document:1967 | SWITCH, DRIVER MARK 76 MOD 0 |
| NN-H-93 Revision C:1995 | HANDLE, HICKORY, STRIKING TOOL |
| MIL-C-6499 Revision E:1970 | CLOCK, AIRCRAFT MECHANICAL TYPE A 13A |
| MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
| MIL-T-12681 Revision A:1955 | TEST SET, TELEPHONE (TEST SET TS-190)(/U) |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-B-36039 Revision B:1989 | BAG, GUN CREW FIRST AID KIT |
| JJ-S-746 Revision A:1956 | STOCKINET, SURGICAL |
| MIL W 583 : C | WIRE, MAGNET, ELECTRICAL |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL-M-43248 Revision C:1982 | MATS, REINFORCING, GLASS FIBER |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-G-25667 Revision B:1970 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| MIL-I-3374 Revision A:1955 | INSULATION CLOTH AND TAPE, ELECTRICAL, VARNISHED CAMBRIC |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MIL-R-6336 Revision D:1970 | RECTIFIER, SILICON, DIRECT CURRENT, TRAINER POWER SUPPLY, TYPE F-1 |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-C-23465 Base Document:1962 | CONNECTION, FLEXIBLE, PIPE LOOPS, FOR STEAM TO MAIN AND AUXILIARY TURBINES (SIZES 4 AND 6 INCHES IPS) |
| MIL-P-19161 Revision A:1956 | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN |
| MIL-B-5046 Revision D:1968 | BOARD, CHART PLOTTING MARK 7 [ASG] |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL A 24215 : A | ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR |
| MIL P 23971 : B | POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-I-27203 Revision B:1987 | Indicator, Position, Wing Flap |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
| MIL-P-15877 Revision D:1973 | PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) |
| MIL-S-13119 Revision E:1984 | SPREADER, SLING, PLATE TYPE, NONADJUSTABLE |
| MIL-B-26026 Revision B:1967 | BATTERY, STORAGE, AIRCRAFT, TYPE MA-2-1 |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL-T-22120 Base Document:1959 | TELESCOPE MARK 116 MOD 0 |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| MIL P 43649 : B (1) | PARACHUTES, CARGO, 12-,26-, AND 34-FOOT DIAMETER |
| MIL-A-55101 Revision A:1962 | ANTENNA AT-912()/VRC |
| MIL-H-9896 Revision C:1988 | HARDWARE, UNIVERSAL LOAD CARRYING SLING |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| MIL-B-29604 Base Document:1994 | Body Armor, Hard, Small Arms Protective, PRU-61/P22P-15 |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| MIL-G-52483 Revision B:1980 | GENERATOR SETS GASOLINE ENGINE, TRAILER-MOUNTED 10 KW, 60 HERTZ, PU-619/M |
| MIL-B-26195 Revision C:1987 | BOXES, WOOD CLEATED, SKIDDED, LOAD BEARING BASE |
| MIL P 002240 : B | PAN, BIOLOGICAL, STAINING |
| NNN-M-560 Base Document:1962 | MORTAR AND PESTLE |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL-T-38760 Base Document:1966 | TENSIOMETER DIAL INDICATING |
| GG P 00581 : D | POINTS, PULP CANAL, DENTAL, PAPER |
| MIL-S-10987 Revision E:1991 | SCALE, PLOTTING, COORDINATE (ALUMINUM, SQUARE, 1,25,000 SCALE AND 1,50,000 SCALE, GRADUATED IN METERS AND YARD) |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-A-22337 Base Document:1964 | AMPLIFIER, RESOLVER ISOLATION |
| NNN-F-001643 Base Document:1971 | FORCEPS MICROSCOPE COVER GLASS |
| MIL T 13584 : C NOTICE 1 | TREAD RUBBER, FOR RECAPPING PNEUMATIC TIRES, AND SOLID RUBBER TIRES FOR INDUSTRIAL AND TRACK LAYING VEHICLES, PACKAGING AND PACKING OF |
| MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF |
| MIL-A-0083216 Revision C:1976 | AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL S 3425 : B | SURVEYING SET, PRECISE LEVELLING, FOR SPIRIT LEVELLING OF SECOND ORDER ACCURACY, PACKAGING OF |
| MIL E 55119 : A | ELECTRO ACOUSTICAL TRANSDUCER EQUIPMENTS |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL-A-21059 Revision A:1959 | AEROLOGICAL DISPLAY EQUIPMENT |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL-B-51254 Base Document:1966 | BREATHING APPARATUS, OXYGEN GENERATING, M20 |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL-C-27487 Revision G:1992 | COUPLING HALVES, QUICK DISCONNECT, CAM LOCKING TYPE |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-A-52363 Revision C:1991 | AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE) |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| HH-I-00536 Revision A:1963 | INSULATION, ELECTRICAL, MICA, NATURAL MUSCOVITE |
| GGG-P-00770 Revision A Interim Revision:1967 | PULLER, FUSE, (S-SHAPE) |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| GG-B-00120 Revision B:1969 | BASEPLATE, DENTAL |
| MIL-T-51289 Revision B:1985 | TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPENSER, HYDROSTATIC-VOLUMETRIC, 6000 PSI, M5 |
| NNN-B-789 Base Document:1963 | BURET STRAIGHT PRECISION (SUPERSEDES IN PART FED SPEC DD-V-581A) |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| GGG-B-471 Revision B:1964 | BLADE, COPING SAW; AND BLADE, JEWELLERS' SAW |
| MIL-E-62484 Revision C:1990 | EARTHMOVER, ARMORED COMBAT, M9, PROCESSING FOR SHIPMENT AND STORAGE OF |
| MIL P 20664 : C NOTICE 3 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-A-36059 Base Document:1961 | APRON, X-RAY PROTECTIVE |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL-B-15228 Revision G:1988 | BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) |
| MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL F 14263 : A | FILTER, BAND PASS F-237()/GRC |
| MIL-E-278 Revision B:1958 | ELECTRODE, WELDING, COVERED, ALUMINUM BRONZE |
| MIL I 28791 : 0 | ISOLATOR, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| GG T 00380 : A | |
| DDD-P-001024 Base Document:1965 | PAD, MEDICATED |
| MIL-W-9049 Revision D:1990 | WEBBING, TEXTILE, NYLON, LOCKING LOOP |
| MIL-A-11610 Revision B:1959 | ADAPTER, LINE, FILLING, 1-TON CONTAINER, M1 |
| GG C 871 : C | CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION) |
| MIL-S-81732 Base Document:1969 | SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED |
| H-B-621 Revision F:1958 | BRUSH, STENCIL |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL-R-15041 Revision C:1960 | RELEASE, LIFESAVING EQUIPMENT, HYDRAULIC AND MANUAL |
| MIL-T-52943 Base Document:1978 | TANK, FABRIC, COLLAPSIBLE, PILLOW TYPE (FOR POTABLE WATER) |
| O-C-114 Revision B:1974 | CALCIUM, HYPOCHLORITE, TECHNICAL |
| MIL-C-37675 Base Document:1977 | CODEINE SULFATE TABLETS, NF |
| MIL P 18722 : 0 | PYROMETERS, PORTABLE, HANDHELD. |
| MIL-D-7106 Revision C:1987 | DRIFTMETER, ELECTRICALLY DRIVEN GYRO STABILIZED |
| MIL I 82929 : A | INITIATOR, EXPLOSIVE ACTUATED, JAN-24/A |
| MIL V 47306 : B | VALVE, STOP LIFT CHECK |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL H 22199 : E | HELMET, SAILOR S, REINFORCED PLASTIC, MK 3 MOD O |
| MIL-P-52897 Revision A:1982 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 10 KW, 50/60 HERTZ, AN/MJQ-18 |
| MIL-W-25913 Base Document:1957 | WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID, GENERAL SPECIFICATION FOR |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-I-17205 Revision C:1961 | INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED |
| SAE AS 85731 : 2015 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| MIL-P-40029 Revision B:1968 | PANEL MARKER, AERIAL LIAISON, COTTON DUCK, PANEL AL-125 |
| MIL P 3627 : D | PENETROMETER, SOIL, DIAL INDICATING [TWO CONES] AND SPRING INDICATING [AIRFIELD CONE] |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| MIL-R-24414 Revision D:1991 | Reels and Guides, Hose, Firefighting, Manually Operated |
| HH-B-100 Revision B:1973 | BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL C 12386 : E | CLAMP, REPAIR, PIPE: WITH GASOLINE-RESISTANT GASKET, GENERAL SPECIFICATION FOR |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL P 11720 : D NOTICE 1 | PROTRACTOR, RECTANGULAR (PLASTIC, 1 3/4 INCHES BY 6 INCHES) |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| MIL-B-37410 Base Document:1977 | BURNER, GAS, LABORATORY AND CARTRIDGE, ASSEMBLY |
| MIL H 3679 : A | HEADSET, ELECTRICAL |
| MIL-C-36066 Revision B:1962 | CHLOROQUINE AND PRIMAQUINE PHOSPHATES TABLETS |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL-P-53045 Revision A:1985 | POWER PLANT, ELECTRIC DIESEL ENGINE, TRAILER MOUNTED, 10KW, 400HERTZ, AN/MJQ-25 |
| MIL-C-11743 Revision F:1989 | CASE, MAINTENANCE AND OPERATIONAL MANUALS |
| MIL P 43184 : 0 | PLATFORM COMPONENTS, AIR DELIVERY. MODULAR (DUAL RAIL SYSTEM), TYPE II |
| AA-S-704 Revision A:1971 | STOOL, STEP, CASTER MOUNTED, SAFETY |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| UU-P-561 Revision H:1972 | PAPER, TRACING |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| ASTM F 1348/F1348M : 1991 : R2002 | Standard Specification for Pneumatic Rotary Descaling Machines |
| SAE AMS P 22968 : 2016 | PAPER, RECORDING, HEAT SENSITIVE |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| SAE AMS R 83283 : 2014 | RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| SAE AS 23479 : 2012 | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| ASTM F 957 : 1991 : R1996 | Standard Specification for Gong, Sound Signaling |
| ASTM F 1312 : 1990 : R2007 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-R-6130 Revision C:1980 | RUBBER, CELLULAR, CHEMICALLY BROWN |
| MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-A-27582 Revision A:1963 | ADAPTER, TEST MX-6050/PSM-6 |
| SAE AMS A 25463 : 2013 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-R-36837 Base Document:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL-C-22229 Revision A:1973 | COPPER BASE ALLOY CASTINGS (FOR PRESSURE TIGHT APPLICATIONS) |
| MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
| MIL-T-55655 Revision A:1972 | TEST FACILITIES KIT MK-980 ( ) /PPS-5 |
| MIL-C-81302 Revision D:1985 | CLEANING COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE |
| MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
| MIL-R-55242 Base Document:1963 | RADIO SET AN/GRC-109 () (UNITS OF) |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| MIL-F-36747 Revision A:1975 | FLASK, ERYLENMEYER, GRADUATED PLASTIC |
| MIL S 37062 : B | SPECTROPHOTOMETER, PHOTOELECTRIC |
| PPP-H-1581 Revision A:1977 | HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF |
| AA-W-001791 Revision A:1973 | WARDROBE AND JANITOR'S CLOSET, WOOD, STEEL FRAME |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| UU-B-335 Revision A:1957 | BINDER, LOOSE LEAF, (WITH OR WITHOUT FLEXIBLE PRONG) |
| MIL-V-36590 Revision A:1975 | VIEW BOX, RH BLOOD TYPING 115 VOLT, AC DC |
| MIL-S-22614 Base Document:1964 | SWITCH, SENSITIVE |
| MIL L 44033 : A NOTICE 1 | LINES MULTI LOOP, CONCENTRIC |
| MIL-T-8598 Revision B:1990 | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR |
| PPP-P-600 Revision G:1992 | PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL C 47027 : 0 | COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-P-53123 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-A-37861 Base Document:1978 | ANTISEPTIC-ANESTHETIC SOLUTION, PHENOLATED |
| MIL-A-21430 Revision B:1974 | ACCESSORY SET MARK 1 MOD 1 |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| MIL-L-20213 Revision E:1980 | LITHIUM HYDROXIDE (LiOH), TECHNICAL |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| MIL-V-83271 Revision B:1992 | VEST, SURVIVAL, MESH NET, SRU-21/P |
| MIL-C-13959 Revision B:1976 | CAMERA SET, STILL PICTURE KS-7 |
| MIL H 29181 : B | HASP, HIGH SECURITY,SHROUDED FOR HIGH AND MEDIUM SECURITY PADLOCK GENERAL SPECIFICATION FOR |
| MIL-A-22335 Base Document:1964 | AMPLIFIER, VARIABLE GAIN |
| MIL P 43607 : G | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| H B 00621 : G | BRUSH, STENCIL |
| GG M 00112 : NOTICE 1 | MANOMETER OUTFITS, SPINAL-FLUID (WATER-TYPE) |
| MIL W 12065 : D | WINCHES, DRUM, HAND OPERATED; SPUR GEAR, 2 OR 3 PURCHASE |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| MIL-T-49057 Revision A:1983 | TEST SET, IFF INTERROGATOR AN/TPM-25A |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
| MIL-G-20241 Revision D:1980 | GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-A-43146 Revision B:1985 | ACCESSORY SET, PARACHUTE, SCUBA ADAPTING |
| MIL-B-52808 Revision A:1979 | BOXES, STORAGE, PHOTOMAPPING, PAPER ROLL |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-S-47129 Revision A:1988 | SILICON DIOXIDE, MICROFINE |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| MIL-A-8576 Revision C:1984 | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| GG C 001321 : B | CASTING MACHINE, DENTAL METALS, AND REPLACEMENT PARTS |
| MIL-R-52676 Revision A:1975 | RECTIFIER SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| DOD-T-46151 Revision A:1979 | TAPE,ADHESIVE, RUBBER (METRIC) |
| MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
| MIL-F-62668 Base Document:1989 | FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT |
| GG-B-686 Revision B:1957 | BROACH, ROOT CANAL, DENTAL |
| GG P 001278 : A | PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL |
| MIL-O-18521 Base Document:1955 | OGIVE, PLASTIC, FOR FUSE MK 29 |
| GG K 00508 : C | KNIFE, PLASTER, DENTAL |
| MIL-Y-1140 Revision H:1972 | Yarn, Cord, Sleeving, Cloth, and Tape-Glass |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| MIL-B-37811 Revision A:1978 | BURS, DENTURE TRIMMING, STRAIGHT HANDPIECE, TUNGSTEN CARBIDE |
| MIL-S-21433 Revision A:1959 | SOCKETS, TURNBUCKLES, AND TURNBUCKLE ASSEMBLIES - WIRE ROPE, WEDGE AND THREADED LOCK SLEEVE |
| NNN T 780 : B NOTICE 1 | TUBE CENTRIFUGE GLASS |
| MIL-A-27330 Revision B:1987 | ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A |
| MIL-L-741 Revision D:1984 | LEAD, ELECTRICAL, ARC WELDING |
| GG-C-00420 Base Document:1964 | CLAMP, RUBBER, TUBING, SHUTOFF |
| MIL-P-47099 Revision A:1989 | POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| MIL-B-36341 Revision A:1975 | |
| MIL-R-22528 Base Document:1964 | RESISTOR, VARIABLE, PRECISION |
| MIL-D-37005 Revision A:1976 | DISK, FILTERING, MICROPOROUS, HYDROSOL TYPE, 47MM. DIAMETER, 100S |
| MIL T 49136 : 0 | TEST SET, COUNTERMEASURES SET AN/ALM-178(( |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| MIL-R-21252 Revision B:1987 | Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL-R-51305 Base Document:1969 | RADIOACTIVE TEST SAMPLE, KRYPTON 85, MX7338/PDR-27R |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL T 55225 : 0 | TRANSMISSION MEASURING SET TS-559()/FT |
| DDD-M-001349 Base Document:1967 | MAT, FLOOR AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE |
| GG-P-00636 Revision B:1973 | PRESS, DENTURE FLASK |
| MIL-T-26609 Revision C:1994 | Transmitter, Position |
| MIL-I-43684 Revision B:1989 | INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER |
| MIL-B-36560 Revision A:1975 | BASSINET AND PRESSING TABLE COMBINATION, HOSPITAL |
| MIL-W-12404 Revision E:1970 | WIND MEASURING SET AN/GMQ-11 (UNITS OF) |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL S 18313 : G | SLINGS, CARGO, NET, NYLON WEBBING |
| GG-C-136 Revision B:1958 | CATHETERS, URETERAL, (X-RAY, GRADUATED) |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| MIL-B-16041 Revision G:1993 | BUILDINGS, PREFABRICATED, READY-CUT, MAGAZINES, STEEL ARCH, 16- AND 25-FOOT SPAN (EXTENSIBLE) |
| MIL-C-2070 Revision E:1985 | CHAIN ASSEMBLY, SINGLE LEG FOR CABINET,GASOLINE, FIELD RANGE OUTFIT |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| MIL-I-7085 Revision C:1994 | INDICATOR, PRESSURE, ENGINE, 0-50 PSI |
| MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL-S-29398 Revision C:1984 | SLING SYSTEM, HELICOPTER EXTERNAL CARGO 40,000 POUND CAPACITY |
| MIL-T-50036 Revision B:1992 | TALC, TECHNICAL, T1 AND T3 |
| MIL K 23714 : C | KIT, SAMPLING, FOR AVIATION FUELS, REUSABLE |
| PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
| RR-S-001301 Base Document:1967 | SAFETY EQUIPMENT, CLIMBING |
| L-F-333 Revision A:1974 | FILM, PHOTOGRAPHIC, MOTION PICTURE (BLACK AND WHITE) |
| MIL-P-51315 Revision A:1983 | POTASSIUM BIFLUORIDE, TECHNICAL |
| MIL-T-22238 Revision H:1987 | TANK, LIQUID STORAGE, METAL FOR PETROLEUM PRODUCTS, HORIZONTAL W/SKIDS, 6OO GALLON CAPACITY |
| DOD-A-10825 Revision A:1979 | ALUMINUM OXIDE, ANHYDROUS, ANALYZED REAGENT (METRIC) |
| MIL-P-51300 Base Document:1952 | PHOSPHOROUS TRICHLORIDE, ANALYZED REAGENT |
| MIL-F-10915 Revision L:1972 | FUZE, HAND GRENADE, RIOT, POCKET, CS,M201A1E1, FUZE, FLOATING SMOKE POT, M207A1, AND FUZE, INCENDIARY, M210 |
| MIL-P-13981 Revision A:1971 | PHOSPHOROUS ACID, ANALYZED REAGENT |
| MIL-Z-51317 Base Document:1969 | ZINC CARBONATE, ANALYZED REAGENT |
| SS S 535 : B | SODIUM BORATE, DECAHYDRATE, TECHNICAL (BORAX) |
| MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
| MIL-B-85099 Base Document:1978 | BATTERY, WET PRIMARY FOR AN/DKT-37(V) TELEMETRY PACKAGE |
| MIL-A-52832 Revision A:1976 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: AN/GSQ-159 (DSID) |
| MIL-I-7171 Revision D:1993 | INSULATION BLANKET, THERMAL ACOUSTICAL |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| MIL-PRF-25690 Revision B:1993 | PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| MIL-R-9300 Revision B:1968 | RESIN, EPOXY, LOW-PRESSURE LAMINATING |
| MIL-C-52707 Revision D:1983 | COVER, FOXHOLE OVERHEAD PROTECTION |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| GG-D-00441 Revision C:1969 | DISPENSER, STRIP, DENTAL |
| MIL-T-55570 Base Document:1967 | TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF) |
| MIL-C-40643 Revision B:1976 | CLIP, FASTENER, CONTAINER |
| MIL-A-22339 Base Document:1964 | AMPLIFIERS, COMPUTATION |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| MIL H 55535 : 0 | HEADSET MICROPHONE KIT MK-1039/G |
| NNN-P-001482 Revision B:1972 | PIPET SEROLOGICAL SAHLI DILUTING HAEMOGLOBINOMETER 0.02 MI |
| UU-S-48 Revision F:1973 | SACK, SHIPPING, PAPER |
| MIL-B-43444 Revision A:1975 | BAG, PLASTIC, CONTAMINATED WASTE DISPOSAL |
| MIL-P-55010 Revision A:1965 | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE |
| NNN-S-00100 Base Document:1996 | SCRAPER LABORATORY RUBBER |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL-M-83524 Base Document:1985 | MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-S-0053046 Revision A:1994 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME MR) |
| MIL-C-14518 Revision E:1992 | CONNECTOR, BRIDLE LINE: SHEAVE TYPE |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| MIL P 008184 : D | PLASTIC SHEET, ACRYLIC, MODIFIED |
| C-F-202 Revision F:1985 | FELT SHEER (HAIR) AND FELT ROLL (HAIR) |
| MIL-A-3248 Revision B:1970 | AMYL NITRITE (INHALANTS) |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| W-A-450 Revision C:1990 | COMPONENTS FOR INTERIOR ALARM SYSTEMS |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-B-273 Revision F:1990 | Bag, Drinking Water Storage, Dispensing, Cloth, Cotton Duck, Porous |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| MIL-P-6131 Revision C:1984 | PLUG, DEHYDRATOR, HUMIDITY, INDICATING |
| MIL-C-13602 Revision C:1967 | CASE, PANEL MARKER FOR AERIAL COMMUNICATION PANEL MARKER SETS AP-30-C AND AP-30-D |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL-T-50059 Revision B:1983 | TITANOUS SULFATE SOLUTION, 20-PERCENT (METRIC) |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL-C-18539 Base Document:1955 | CARTRIDGE, SLICK MARKER AN- MK 1 MOD 0 |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL A 51027 : A | ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
| MIL-T-55631 Base Document:1972 | TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| MIL-S-52365 Revision B:1972 | SURVEYING SET, ARTILLERY FIRE CONTROL, FOURTH ORDER, PACKAGING OF |
| L-P-506 Revision A:1963 | PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-A-11755 Revision E:1994 | ANTIFREEZE, ARCTIC-TYPE |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-S-7877 Revision B:1956 | Seat, Passenger, Cabin Folding |
| MIL-B-44314 Base Document:1987 | BODY ARMOR, SMALL ARMS PROTECTIVE, AIRCREWMAN |
| MIL-D-6728 Revision A:1956 | DAMPER, ENGINE EXHAUST FLAME AND GLARE |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-HDBK-7 Revision B:1982 | LUMBER AND ALLIED PRODUCTS |
| MIL-C-20061 Revision D:1979 | CLINOMETERS, SHIP, AND ACCESSORIES |
| MIL W 3970 : C | WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR |
| MIL M 21649 : C | MOUNT, RESILIENT, TYPE 5M1O,OOO-H |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| MIL N 37136 : 0 |