MIL-STD-1916 Base Document:1996
Current
Current
The latest, up-to-date edition.
DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT
Available format(s)
PDF
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX - Examples of sampling plan use
CONCLUDING MATERIAL
Promotes defense contractors and other commercial organizations supplying goods and services to the U.S. Government to submit efficient and effective process control (prevention) procedures in place of prescribed sampling requirements. Supports the movement away from an AQL-based inspection (detection) strategy to implementation of an effective prevention-based strategy including a comprehensive quality system, continuous improvement and a partnership with the Government.
| Committee |
AREA QCIC
|
| DevelopmentNote |
Supersedes MIL STD 105 (E). (02/2008) NOTICE 1 - Notice of Inactivation for New Design. NOTICE 2 - Notice of Reactivation. (06/2014)
|
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-PRF-32366 Base Document:2010 | Grip/Bipod, Forward |
| MIL-DTL-14970 Revision D:2003 | EXPLOSIVE COMPOSITION A-5 |
| MIL-PRF-32365 Base Document:2010 | Bracket, Forward Rail |
| MIL-C-70628 Base Document:1987 | Container, Ammunition, PA108 Assembly |
| MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
| MIL-W-13855 Revision D:1973 | WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-PRF-71182 Base Document:2006 | CARTRIDGE, 25 MM: ARMOR PIERCING FIN STABILIZED DISCARDING SABOT WITH TRACE (APFSDS-T), M919 |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| MIL-DTL-18492 Revision B:2011 | TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-PRF-32316 Base Document:2008 | RIFLE, 7.62 MM: SEMI-AUTOMATIC SNIPER SYSTEM (SASS) - M110 |
| MIL-PRF-32558 Base Document:2016 | BLAST SENSING AND BLAST DATA RECORDING SYSTEMS FOR USE IN U.S. MILITARY GROUND VEHICLES |
| MIL-PRF-32364 Base Document:2010 | Holder, Multi-Magazine |
| MIL-DTL-63997 Revision C:2009 | Rifle, 5.56 Millimeter: M16A2 |
| MIL-DTL-20625 Revision B:2013 | Universal Joints, Block Type, Mechanical Remote Control System |
| MIL-DTL-11922 Revision F:2016 | SCARF, BRANCH OF SERVICE, BIB TYPE |
| MIL-DTL-60547 Revision G:2008 | PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
| GGG-C-2794 Revision A:2013 | Cups, Oil, Lubricating, and Oilers, Self-Feeding, General Specification for |
| MIL-DTL-43036 Revision C:2017 | TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC FILM, (FOR SEALING FIBER CONTAINER AND CANS) |
| MIL-DTL-32169 Base Document:2004 | WHEEL ASSEMBLIES, POLYURETHANE; FOR THE BRADLEY FIGHTING VEHICLE |
| MIL-DTL-70599 Revision B:2009 | Carbine, 5.56 Millimeter: M4 |
| FAA 8300.14 : 2007 | REPAIR SPECIFICATION APPROVAL PROCEDURES |
| SAE AMSP21600A | Paint System, Fluorescent, Removable, for Aircraft Application |
| MIL-DTL-19803 Revision G:2007 | CONVERTER, LIQUID OXYGEN, 10-LITER, GCU-24A/A |
| MIL-PRF-71140 Revision A:2006 | Cartridge, 25MM: Target Practice with Trace (TP-T), M793 |
| MIL-DTL-17896 Revision E:2008 | BAROMETER, ANEROID |
| MIL-DTL-48684 Revision B Interim Revision:2004 | CARTRIDGE, 40 MM: M918TP LOADING, ASSEMBLING, AND PACKAGING |
| MIL-DTL-2427 Revision J:2017 | Box, Ammunition Packing: Wood, Nailed |
| MIL-DTL-13139 Revision F:2010 | Charge, Demolition, Shaped, 15 Lb.-M2A4 Parts for |
| MIL-PRF-32327 Base Document:2009 | Rifle, Caliber .50:Sniper W/Day Optic Sight and Carrying Cases - M107 |
| MIL-DTL-50872 Revision D Interim Revision:2004 | CARTRIDGE, 40 MM: HEDP, M433 |
| MIL-PRF-83419 Revision F:2016 | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL-DTL-48683 Revision B Interim Revision:2004 | CARTRIDGE 40 MM PRACTICE - TP M918 - PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
| MIL-DTL-45144 Revision F:2017 | Fuse, Blasting, Time - M700, and Dummy Fuse, Blasting, Time - Inert Loading, Assembling and Packing |
| MIL-DTL-50911 Revision B:2011 | Priming Assembly for Demolition Charge Assembly : M183 Parts for and Loading, Assembling and Packing |
| SAE AMSC26074D | Electroless Nickel Coatings |
| MIL-DTL-63092 Revision B Interim Revision:2004 | Cartridges, 40 Millimeter, Parachutes, Loading, Assembling, and Packing |
| MIL-DTL-642 Revision F:2015 | Plugs, Telephone, and Accessory Screws General Specification for |
| DSCC 89112 : B | POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| SAE AS85421A | Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| ASTM E 1556 : 2012 : REDLINE | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
| MIL-DTL-82001 Revision F:2013 | Cable Assembly, Special Purpose, Electrical, Intervehicular (24 Volt to 12 Volt Reduction) |
| MIL-DTL-63245 Revision C:2008 | Projectile 155 Millimeter: HE, Metal Parts Assembly, M795 |
| MIL-DTL-29378 Revision B:2008 | BELT, MAN'S: CEREMONIAL, OFFICERS (SAM BROWNE) |
| MIL-DTL-52031 Revision E:2009 | EXTINGUISHER, FIRE, VAPORIZING-LIQUID CF[3]BR - HAND-HELD WITH BRACKET |
| MIL-DTL-46594 Revision C:2011 | Charge, Demolition, Shaped, 40 LB. M3A1 Loading, Assembling and Packing |
| MIL-STD-2219 Revision A:2005 | FUSION WELDING FOR AEROSPACE APPLICATIONS |
| MIL-DTL-32258 Base Document:2007 | NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| MIL-DTL-20517 Revision J:2011 | Simulator, Projectile, Air Burst, M74A1 Parts for and Loading, Assembling and Packing |
| MIL-DTL-2726 Revision C:2006 | Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for |
| IEEE DRAFT 1505 : 0 | RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY |
| SAE AMSA21180C | Aluminum-Alloy Castings, High Strength |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| MIL-DTL-24223 Revision D:2014 | LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS |
| MIL-DTL-512 Revision C:2001 | Aluminum Powder, Flaked, Grained, and Atomized |
| MIL-DTL-60277 Revision B:2003 | INITIATOR, CARTRIDGE ACTUATED, DELAY, M26 ASSEMBLY |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-P-13298 Revision A:1963 | POLYISOBUTYLENE (FOR AMMUNITION USE) |
| MIL-DTL-87934 Revision C:2017 | DESICCANT, MOLECULAR SIEVE (IMPREGNATED) |
| MIL-PRF-32521 Revision A:2016 | EXPEDITIONARY SHELTER PROTECTION SYSTEM (ESPS) PANEL MODULE |
| MIL-DTL-25539 Revision C:2009 | CANDLES, ILLUMINATING, SURVIVAL, HIGH MELTING POINT |
| O-A-445 Revision C:2003 | AMMONIA, TECHNICAL |
| MIL-DTL-244 Revision C:2014 | Nitrocellulose |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| MIL-DTL-60944 Revision B Interim Revision:2004 | CARTRIDGE, 40 MM - PRACTICE, M385A1 |
| MIL-DTL-70759 Revision A:2004 | Container, Ammunition: Hand-Held Pyrotechnic Signal Series, ScopePA142A1 |
| MIL-DTL-32260 Revision A:2014 | Primer, Percussion - M28A2, M28B2, XM133 and XM134 Assembly |
| MIL-DTL-32555 Base Document:2016 | Tool, Installation, for Adjustable Tie-Down Straps, General Specification for |
| MIL-DTL-48557 Revision B:2012 | Mount, Telescope and Quadrant - M171A1 |
| FAA 8110.52 : 2017 | TYPE VALIDATION AND POST-TYPE VALIDATION PROCEDURES |
| MIL-DTL-7750 Revision C:2007 | HOUSING, PARACHUTE RIPCORD |
| MIL-DTL-70742 Revision A:2013 | Mount, Telescope and Quadrant - M187A1 |
| MIL-DTL-46506 Revision E:2009 | Boxes, Ammunition Packing, Wood, Wirebound |
| MIL-R-25170 Revision B:1983 | RELEASE, AUTOMATIC, AIRCRAFT SAFETY, LAP BELT |
| MIL-PRF-46676 Revision B:2006 | Flexible Explosive |
| MIL-DTL-14997 Revision C:2009 | Projectile, 105MM, Illuminating, M314A3 and Projectile, 105MM, Infrared Illuminating, M1064 Loading Accessories |
| MIL-DTL-40137 Revision F:2004 | CLEVISES, RIGGING, AIR DELIVERY TYPE: GENERAL SPECIFICATION FOR |
| MIL-PRF-907 Revision F:2004 | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
| MIL-DTL-24127 Revision A:2016 | EDUCTORS, GASOLINE, OIL, OR WATER |
| MIL-PRF-32363 Base Document:2010 | Sling, Tactical |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| SAE AS 17852 : 2012 | REDUCERS, OXYGEN PRESSURE |
| MIL-DTL-81248 Revision C:2006 | DETECTOR PAD, FREE WATER |
| MIL-DTL-14067 Revision C:2014 | POWDERS, METAL (FOR USE IN AMMUNITION) |
| MIL-DTL-32309 Base Document:2009 | Rifle, 5.56 Millimeter: M16A4 |
| MIL-DTL-25469 Revision J:2014 | Valves, Filler, Liquid Oxygen, Aircraft Type |
| MIL-DTL-21567 Revision B:2009 | COMPOUND, SILICONE, SOFT FILM |
| MIL-DTL-45010 Revision B:2014 | COMPOSITION C-4 |
| SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
| IEC 63004:2015 | Standard for receiver fixture interface |
| SAE AS85449A | Clamp Assembly, Saddle Type, Cushioned, General Specification For |
| SAE AS81306A | Wiring Installation Tools for Bands and Tiedown Straps |
| ASTM D 4397 : 2016 : REDLINE | Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| MIL-DTL-83767 Revision C:2007 | Lubricating Oil, Vacuum Pump, Mechanical |
| IECQ CS 033200-TW0001:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - TOUCH PANELS: RESISTIVE TOUCH PANEL |
| MIL-DTL-48556 Revision B:2012 | Quadrant, Fire Control - M18A1 |
| MIL-DTL-60584 Revision B:2006 | Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2 |
| MIL-DTL-87255 Revision A:2008 | VALVES, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| MIL-PRF-12386 Revision F:2011 | CLAMP, REPAIR, PIPE: WITH FUEL-RESISTANT GASKET |
| MIL-T-10646 Revision D:1988 | Telescope, Straight: M90 Series, M90A2 and M90A3 |
| SAE AS50571B | Lights, Instrument, Individual, General Specification For |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-DTL-45585 Revision E Interim Revision:2004 | Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2 |
| MIL-DTL-3717 Revision C:2002 | WEIGHT, SOUNDING |
| MIL-DTL-32594 Base Document:2018 | Sodium Phosphate, Tribasic; Anhydrous, Dodecahydrate, and Monohydrate, Technical |
| MIL-DTL-8348 Revision K:2008 | Gage Assemblies, Air Pressure, Dial Indicating Chuck Type, Self-Contained |
| MIL-DTL-27166 Revision F:2013 | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL-DTL-51227 Revision C:2013 | PUMP, CENTRIFUGAL, DECONTAMINATION APPARATUS |
| MIL-PRF-32049 Base Document:1999 | PALLET, FIELD ARTILLERY PROJECTILE |
| MIL-DTL-25971 Revision D:2015 | LIGHT, AIRPORT TRAFFIC CONTROL, SDU-4/U |
| MIL-PRF-32381 Revision B:2016 | Acoustic Hailing Device (Light) |
| FAA 8110.42 : 2014 | PARTS MANUFACTURER APPROVAL PROCEDURES |
| MIL-DTL-12713 Revision E:2012 | Quadrant, Fire Control: M1A3 |
| MIL-PRF-32295 Revision B:2017 | CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE |
| MIL-PRF-32597 Base Document:2018 | CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
| MIL-DTL-2439 Revision G:2014 | CONTAINER, AMMUNITION, FIBER, SPIRALLY WOUND |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| MIL-PRF-32293 Base Document:2008 | Cap, Blasting, Electric - M6 |
| MIL-DTL-48360 Revision A:2014 | Charge, Propelling, M200, for 105MM Howitzer, M119 Loading, Assembling and Packing |
| MIL-DTL-641 Revision G:2015 | Jacks, Telephone General Specification for |
| MIL-DTL-32077 Revision B:2018 | Horn, Flyer\'s Relief Tube |
| MIL-N-246 Revision B:1962 | NITROGLYCERIN |
| MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
| MIL-DTL-98 Revision B:2013 | Diphenylamine, Technical |
| MIL-DTL-70438 Revision A:2008 | Plug Assembly, Lifting, Universal |
| MIL-PRF-32056 Base Document:1999 | CARTRIDGE, 10 GAUGE SHOTSHELL, BLANK |
| MIL-DTL-7990 Revision D:2012 | Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C |
| MIL-DTL-85040 Revision D:2004 | DRAWERS AND UNDERSHIRTS, FLYERS, ANTI-EXPOSURE, ARAMID, HIGH TEMPERATURE RESISTANT, CWU-43/P AND CWU-44/P |
| MIL PRF 0032381 : A | ACOUSTIC HAILING DEVICE (LIGHT) |
| MIL-DTL-60426 Revision B:2006 | BURSTER, PROJECTILE - M54A1 |
| MIL-DTL-757 Revision C:2012 | Lead Styphnate, Normal |
| MIL-DTL-52701 Revision C:2009 | INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0) |
| MIL-DTL-48555 Revision B:2012 | Quadrant, Fire Control - M17A1 |
| MIL-DTL-43243 Revision D:2002 | SEPARATOR, PARACHUTE REMOVABLE CONNECTOR LINK |
| SAE AS8914B | Bearing, Roller, Self-Aligning, Airframe, Antifriction |
| SAE AMS8660 | Silicone Compound NATO Code Number S-736 |
| ANSI/AAMI PB70:2012 | LIQUID BARRIER PERFORMANCE AND CLASSIFICATION OF PROTECTIVE APPAREL AND DRAPES INTENDED FOR USE IN HEALTH CARE FACILITIES |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| MIL-PRF-44259 Revision E:2009 | Light Set, Portable, Fluorescent |
| MIL-DTL-2156 Revision D:2010 | CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-417 Revision H:2012 | Adapter, Priming: M1A5. |
| MIL-DTL-440 Revision D:2015 | Composition A-3 and A-4 |
| MIL-DTL-50863 Revision D Interim Revision:2004 | CARTRIDGE, 40 MM - HEDP, M430A1 |
| MIL-DTL-17376 Revision F:2007 | Caps and Flanges, Compressed-Gas Cylinder, General Specification for |
| MIL-DTL-60585 Revision B:2006 | CASE, PROJECTILE BURSTER - ASSEMBLY, M1E1 |
| MIL-DTL-9320 Revision E:2010 | Signal, Warning, Audible, for Headset, Type MA-1 |
| MIL-DTL-32263 Base Document:2007 | Cover, Flexible Rotating Band |
| MIL-DTL-10058 Revision J:2010 | SIMULATOR, PROJECTILE, GROUND BURST - M115A2 |
| MIL-DTL-32415 Base Document:2012 | Dummy Cap, Blasting: Non-Electric, 5 Minute Inert Time Fuse Delay-M32 |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MIL-DTL-32000 Base Document:2003 | Paint, Face, Camouflage |
| MIL-DTL-48558 Revision C:2012 | Telescope, Elbow - M138A1 |
| MIL-DTL-48550 Revision A:2012 | Collimator, Infinity Aiming Reference - M1A2 |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-DTL-81306 Revision B:2007 | TOOL, INSTALLATION FOR ADJUSTABLE PLASTIC AND METAL TIEDOWN STRAPS |
| MIL-B-45451 Revision B:1961 | BENITE STRANDS |
| MIL-DTL-9177 Revision C:2014 | CONNECTOR, AUDIO, AIRBORNE, GENERAL SPECIFICATION FOR |
| MIL-DTL-60315 Revision C:2007 | CHARGE, PROPELLING, M67, FOR 105MM HOWITZER LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-32411 Base Document:2012 | Igniter, Time Blasting Fuse: with Shock Tube Capability - M81, Load, Assemble, and Pack |
| MIL-DTL-50869 Revision F Interim Revision:2004 | Fuze, Point Initiating, Base Detonating (PIBD) - M550, Less Spitback Assembly Loading, Assembling, and Packing |
| MIL-DTL-46593 Revision B:2006 | Projectile, Calibers .22, .30, .50 and 20MM Fragment-Simulating |
| MIL-DTL-2710 Revision D:2016 | LINKS, CHAIN, DETACHABLE, REGULAR AND PEAR-SHAPED |
| MIL-DTL-45468 Revision F:2012 | Cap, Blasting: Electric - M6 Parts for, and Loading, Assembling and Packing |
| MIL-S-23389 Revision B:1975 | Shipping and Storage Container, Cartridge, 20MM, M548 |
| MIL-DTL-5790 Revision H:2008 | Transmitter, Pressure, Oil, Synchro, 0-200 PSI 320-Degree Movement, 26V, Single Phase, 400 Cycles |
| MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-71186 Revision A:2009 | Carbine, 5.56 Millimeter: M4A1 |
| MIL-PRF-50204 Revision D:1997 | Supports, Structural (For Use in Ammunition Containers) |
| ASTM E 2910 : 2012 | Standard Guide for Preferred Methods for Acceptance of Product |
| MIL-DTL-60377 Revision C:2007 | PROJECTILE, 155 MM, HE, M107 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-45417 Revision D:2014 | Bandoleer, APERS, Mine, M7, Assembly |
| MIL-DTL-248 Revision D:2002 | TRINITROTOLUENE (TNT) |
| MIL-DTL-10057 Revision J:2010 | SIMULATOR, HAND GRENADE - M116A1 |
| MIL-DTL-46229 Revision D:2014 | Cartridge, 105MM Blank, M395 Loading, Assembling and Packing |
| MIL-DTL-46540 Revision C:2006 | Case, Cartridge: 20 Millimeter -M103 |
| MIL-DTL-50512 Revision A:2010 | MINE, APERS, PRACTICE, M68 - ASSEMBLING AND PACKING |
| MIL-DTL-46550 Revision D:2011 | Charge, Demolition, Shaped, 40 Lb. M3A1, Metal Parts Assembly |
| MIL-DTL-23450 Revision E:2016 | VALVES, EXPANSION, THERMOSTATIC, REFRIGERANT-12 (R-12) AND REFRIGERANT-22 (R-22) |
| W-B-133 Revision E:2005 | BATTERY, STORAGE, LEAD-ACID (INDUSTRIAL MOTIVE POWER SERVICE) |
| MIL-DTL-48559 Revision B:2012 | Mount, Telescope and Quadrant - M172A1 |
| MIL-PRF-71196 Base Document:2002 | Sensor, Vehicle Motion |
| MIL-C-45459 Revision C:1982 | Cartridge, 75MM, Blank, M337A2 Loading, Assembling and Packing |
| MIL-PRF-32368 Revision A:2012 | Kit, Weapons Cleaning, Improved |
| OO-M-340 Revision F:2004 | MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT |
| MIL-DTL-45449 Revision C:2011 | Pallet, Units, Wood, for Shipment of Projectile Metal Parts and Projectile Ammunition |
| MIL-DTL-25421 Revision C:2009 | Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated |
| MIL-DTL-32261 Base Document:2007 | CASE CARTRIDGE, 105 MM, M14 AND M217 |
| MIL-DTL-382 Revision E:2014 | Magnesium Powder - For Use In Ammunition |
| MIL-PRF-70600 Revision B:2012 | Cartridge, Rimfire, .22 Caliber |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| MIL-DTL-24577 Revision A:2007 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL-DTL-32412 Base Document:2012 | HFC-227EA FIRE EXTINGUISHING AGENT ENHANCED WITH SPECIAL SODIUM BICARBONATE POWDER (HFC-227EA/SBC[S]) |
| MIL-DTL-70951 Revision A:2007 | PALLET, FIELD ARTILLERY PROJECTILE |
| MIL-DTL-10986 Revision G:2007 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE |
| MIL-P-14796 Base Document:1968 | Process Oil (for use with Ammunition) |
| MIL-DTL-48669 Revision A Interim Revision:2004 | CARTRIDGE, 40 MM - M550 ESCAPEMENT ASSEMBLY |
| MIL-DTL-24537 Revision A:2017 | Rope, Fibrous, Plaited, Continuous Polyester Filament with a Staple Wrap |
| MIL-DTL-46225 Revision D:2012 | Lead Azide RD-1333 |
| MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL-DTL-63268 Revision B:2007 | Plug, Shock Attenuating and Plug, Lifting, for M107 and M804 |
| MIL-DTL-32326 Base Document:2009 | FUZE, PYROTECHNIC SELF DESTRUCT - M1162 |
| MIL-DTL-20268 Revision H:2017 | FRAME, CAP |
| MIL-DTL-12235 Revision A:2009 | PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37 MM M1000, 57 MM M1001, 75 MM M1002, 90 MM M1003, 105 MM M1004, 20 MM M1005, 57 MM M1001A, AND 75 MM M1002A |
| SAE AS 81914 : 2016 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| SAE AS85720B | Fittings, Tube, Fluid Systems, Separable, High Pressure Beam Seal, 5000/8000 psi, General Specification For |
| SAE AMSQQA225C | Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
| ASTM D 4634 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| EN 4176:2005 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| L-P-377 Revision C:1994 | PLASTIC SHEET AND STRIP, POLYESTER |
| MIL-DTL-82604 Revision A:2010 | Compound, Asphaltic, High Melting Hotmelt (Cavity Lining) |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-PRF-15624 Revision H:2016 | GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM) |
| MIL-PRF-48656 Revision B:1999 | Cartridges, Shotshell |
| MIL-DTL-70745 Revision A:2011 | Strip, Ammunition, Metallic - 30 MM |
| MIL-DTL-70446 Revision B:2007 | MACHINE GUN, 5.56 MM: M249 |
| MIL-DTL-70446 Revision C:2008 | MACHINE GUN, 5.56 MM: M249 |
| MIL-DTL-18186 Revision E:2017 | CROWNS, SERVICE AND DRESS CAP |
| MIL-PRF-32367 Base Document:2010 | Bipod, Squad Designated Marksman (SDM) |
| MIL-DTL-5020 Revision F:2015 | Liquid, Compass, Aircraft |
| MIL-B-70511 Revision B:1993 | BOLT, AUTOMATIC WEAPON: (PRACTICE) M2 |
| MIL-DTL-32598 Base Document:2018 | Sodium Phosphate, Dibasic, Anhydrous, Technical |
| MIL-DTL-82633 Revision A:2011 | Compound, Polymeric Elastomer, Thermosetting |
| MIL-DTL-6852 Revision C:2014 | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT, GENERAL SPECIFICATION FOR |
| MIL-DTL-15011 Revision K:2013 | Pallets, Material Handling, Wood Post Construction, 4-Way Entry |
| MIL-DTL-6019 Revision E:2011 | GAGES, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN |
| MIL-DTL-24688 Revision A:2011 | INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM |
| MIL-DTL-70794 Revision A:2006 | PROJECTILE, M940 - 20 MM, MULTIPURPOSE, TRACE SELF-DESTRUCT, METAL PARTS |
| MIL-DTL-32175 Base Document:2004 | FUZE, PIBD - M549A1, LESS SPITBACK ASSEMBLY |
| MIL-DTL-60982 Revision C Interim Revision:2004 | Case Cartridge, 40 Millimeter - M169 Loading, Assembling, Packing |
| MIL-DTL-63108 Revision C:2015 | Cartridge, Impulse: M796 |
| MIL-DTL-3060 Revision G:2011 | Boxes, Small Arms Ammunition - M19A1 and M2A2 |
| MIL-DTL-15659 Revision J:2003 | TERMINAL, LUG: SOLDER, COPPER AND PHOSPHOR BRONZE |
| MIL-DTL-14824 Revision C:2007 | PROJECTILE 155 MM, HE, METAL PARTS ASSEMBLY, M107 |
| MIL-A-48449 Revision A:1981 | Alignment Device, Optical, Gun Bore |
| MIL-PRF-32452 Base Document:2013 | Pallet Box, Collapsible |
| MIL-O-52374 Revision E:2013 | Oscillator: High Voltage General Specification for |
| RR-C-271 Revision G:2016 | CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| MIL-PRF-71168 Revision A:2000 | CARTRIDGE, 7.62MM, XM974 TRACER, SHORT RANGE, TRAINING AMMUNITION |
| MIL-DTL-70526 Revision B:2009 | Projectile, 105 Millimeter, HE, RA- M913/M927, Delay Assembly for |
| MIL-DTL-70507 Revision A:2010 | PROJECTILE, 155 MM, HE - M864E2 LOADING, ASSEMBLING AND PACKING |
| MIL C 440 : C | COMPOSITION A-3 AND A-4 |
| MIL-PRF-32294 Base Document:2008 | Cap, Blasting, Non-Electric - M7 Cap, Blasting, Practice, Inert, Non-Electric - XM30 |
| MIL-DTL-24536 Revision A:2017 | Rope, Fibrous, Double Braided, Continuous Polyester Filament with a Staple Wrap |
| MIL-DTL-3971 Revision G:2016 | METERS, TIME TOTALIZING, NON-HERMETICALLY SEALED, ELECTRICAL: GENERAL SPECIFICATION FOR |
| MIL-DTL-6279 Revision M:2003 | PARKA, EXTREME COLD WEATHER, TYPE N-3B |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| MIL-PRF-6855 Revision F:2009 | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR |
| MIL-PRF-32076 Base Document:2000 | UNITIZATION OF AMMUNITION |
| MIL-DTL-10866 Revision E:2005 | UREA, TECHNICAL (METRIC) |
| MIL-PRF-32317 Base Document:2009 | CARTRIDGE, 7.62 MM: ARMOR PIERCING - M993 |
| MIL-DTL-17124 Revision F:2012 | Cord, Detonating and Dummy Cord, Detonating |
| MIL-PRF-32269 Base Document:2007 | Perforated Homogeneous Steel Armor |
| MIL-DTL-1163 Revision C:2008 | BARS, FLINDERS |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| MIL-DTL-48554 Revision B:2011 | Telescope, Panoramic - M137A2, M137A3, and M137A4 |
| MIL-DTL-14852 Revision D:2009 | PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| SAE AS85052A | Clamp Assembly, Loop Type, Cushioned, General Specification For |
| BS EN 4176:2005 | Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification |
| MIL-DTL-18714 Revision F:2012 | PRIMER, ELECTRIC, MARK 45 MOD 1 |
| ASQ Q9000:2005 | Quality Management Systems - Fundamentals And Vocabulary |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ASQ B1/B2/B3:1996 | Guide For Quality Control Charts - Control Chart Method Of Analyzing Data - Control Chart Method Of Controlling Quality During Production |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ANSI/ISO/ASQ Q9004:2009 | Quality Management Systems Managing For The Sustained Success Of An Organization |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.