MIL-STD-193 Revision L:1991
Current
Current
The latest, up-to-date edition.
Painting, Procedures and Marking for Vehicles, Construction Equipment, Material Handling Equipment, and Spare Parts
Available format(s)
PDF
Published date
27-08-1991
Publisher
€16.67
Excluding VAT
Gives minimum requirements for materials and procedures to be used in surface preparation, surface treatment, plating and painting of vehicles, construction and material handling equipment, to provide protection from the deteriorating effects of climatic conditions encountered in military use.
| DevelopmentNote |
L NOTICE 1 - Notice of Cancellation without Replacement. L NOTICE 2 - Notice of Reinstatement but remains Inactive for New Design. (08/2007)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This standard establishes minimum requirements for materials to be used and procedures to be followed in surface preparation, surface treatment, plating and painting of vehicles, construction and material handling equipment, and markings so as to provide protection from the adverse effect of chemical and environmental conditions.
| MIL-C-62500 Base Document:1985 | Carrier, Electronic Warfare System, Full-Tracked: M1015A1 |
| MIL PRF 62542 : B | BALL SCREW LINEAR ACTUATOR (BSLA) |
| MIL V 62547 : A (1) | VALVE AND CYLINDER ASSEMBLIES, HALON |
| MIL-S-12158 Revision D:1988 | SEALING COMPOUND, NON-CURING, POLYBUTENE (S/S BY A-A-52495) |
| MIL-PRF-53090 Revision B:2016 | Blade, Mine Clearing |
| MIL S 13623 : C | SWITCH, ROTARY, 28 VOLT DC |
| MIL P 45307 : B | PUMP, HYDRAULIC, AXIAL PISTONS, MANUAL, WITH FIRE-CONTROL SWITCH |
| MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
| MIL PRF 62034 : E | SEMITRAILERS, STAKE - SEMITRAILERS, VAN AND SEMITRAILERS, REFRIGERATOR - MILITARY DESIGN |
| MIL-T-62514 Base Document:1985 | TRUCKS, 5-TON, 6X6, M939A1 SERIES (S/S BY TACOM PUB ATPD-2056) |
| MIL-PRF-45316 Revision J:2011 | Trailer, Tank: Potable Water, 400-Gallon, 2-Wheel, M149A2 |
| MIL-STD-1516 Revision B:1990 | Unified Code for Coating and Finishes for DOD Materiel (No S/S Document) |
| MIL S 12109 : C | SOLENOID, ELECTRICAL, CLASS 2 (MACHINE GUN) |
| MIL L 14465 : C | LIGHTS, COMPOSITE, VEHICULAR (METRIC) |
| MIL L 45068 : D | LIGHT, DOME,VEHICULAR, 24 VOLT DIRECT CURRENT |
| MIL E 62177 : C | ENGINE, DIESEL: 12 CYLINDER, 90 V-TYPE, 750H.P. AVDS1790-2 AVDS1790-2A, AVDS1790-2C, AVDS1790-2D, AVDS1790-2DR, AVDS1790-2CA AND AVDS1790-2DA |
| MIL S 13625 : D | SWITCH, PULL, SWITCH, PUSH, SWITCH, BEAM SELECTING, HEADLIGHT, ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL T 45333 : D NOTICE 2 | TRAILER, FLAT BED, 10 TON 4 WHEEL M345 |
| MIL-D-63303 Revision B:1988 | Dispenser, Mine, Ground Vehicle, M128 |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL-R-12144 Revision F:1982 | REFLECTOR, INDICATING, CLEARANCE (S/S BY A-A-52428) |
| MIL-B-62098 Base Document:1968 | Bulldozer, Earth Moving: Tank Mounting, M8A3 |
| MIL-S-62300 Base Document:1983 | Switch, Pressure (No S/S Document) |
| MIL S 52028 : C | SWITCH, VEHICULAR IGNITION: WATERPROOF, STARTER AND MAGNETO, WITH DEGASSER CONTROL |
| MIL-A-62247 Base Document:1989 | Armored Reconnaissance, Airborne Assault Vehicle: Full Tracked, 152MM, M551 and M551A1 (w/laser Range Finder) (Overhaul) (S/S by Army TM9-2350-230-34-1 Army TM9-2350-230-24P/1 TACOM DMWR 09-2350-230-1 and 2 TACOM DMWR 09-2815-205 TACOM DMWR 09-2520-249) |
| MIL B 62284 : 0 | BLOWER ASSEMBLY, AIR CLEANER |
| MIL-A-62463 Revision B:1992 | Actuator Assembly, Rotary |
| MIL PRF 14465 : D | LIGHTS, COMPOSITE, VEHICULAR (METRIC) |
| MIL-A-45559 Revision B:1967 | Armored Reconnaissance/Airborne Assault Vehicle, Full Tracked, 152MM, XM551 (No S/S Document) |
| MIL-B-45390 Revision A:1987 | Bulldozer Kit, Earth Moving, Tank Mounting, M9 |
| MIL-STD-1180 Revision B:1986 | SAFETY STANDARDS FOR MILITARY GROUND VEHICLES |
| MIL B 62542 : A | BALL SCREW LINEAR ACTUATOR |
| MIL P 62071 : B | POWER SUPPLY, HIGH VOLTAGE, SOLID STATE, 24 VOLTS, DIRECT CURRENT |
| MIL-I-26525 Revision F:1988 | Indicator, Voltage, Battery Generator 28 Volt DC (Nominal) (S/S by A-A-52508) |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT (S/S BY A-A-2962) |
| MIL-R-46164 Revision C:1983 | RUSTPROOFING FOR MILITARY VEHICLES AND TRAILERS (S/S BY MIL-HDBK-46164) |
| MIL-M-45202 Revision C:1981 | Magnesium Alloy, Anodic Treatment of (S/S by ASTM-D1732) |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL-A-81801 Revision A:1994 | Anodic Coating for Zinc and Zinc Alloys (No S/S Document) |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL P 14105 : D | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| DOD-P-15328 Revision D:1978 | Primer (Wash), Pretreatment (Formula NO. 117 for Metals) (Metric) (S/S by TT-C-490) |
| MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL P 14631 : B SUPP1 | PLATE, AUTOMOBILE, INDIVIDUAL; GENERAL SPECIFICATION FOR |
| MIL-D-23003 Revision A:1980 | Deck Covering Compound, Nonslip, Rollable (S/S by MIL-PRF-24667) |
| QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| TT-E-522 Revision A:1974 | ENAMEL, PHENOLIC, OUTSIDE (NO S/S DOCUMENT) |
| MIL-W-5044 Revision C:1970 | WALKWAY COMPOUND, NONSLIP AND WALKWAY MATTING, NONSLIP (S/S BY A-A-59166 AND A-A-59124) |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| MIL C 13924 : C | COATING, OXIDE, BLACK, FOR FERROUS METALS |
| MIL-P-18317 Base Document:1954 | Plating, Black Nickel (Electrodeposited) on Brass, Bronze, or Steel (Future acquisitions for this item may refer to SAE AMS-QQ-N-290) |
| MIL-M-3171 Revision C:1966 | Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on (S/S by SAE-AMS-M-3171) |
| TT-E-489 Revision J:1994 | Enamel, Alkyd, Gloss, Low VOC Content (See Notice 2 for Replacement Information) |
| TT-E-496 Revision B:1967 | ENAMEL, HEAT-RESISTING (400 DEG. F.), BLACK (S/S BY A-A-3054) |
| TT-E-485 Revision F:1968 | ENAMEL, SEMIGLOSS, RUST-INHIBITING (NO S/S DOCUMENT) |
| MIL-C-81562 Revision B:1983 | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) (S/S by SAE-AMS-C-81562) |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) (S/S BY A-A-59464) |
| MIL-V-173 Revision C:1969 | Varnish, Moisture-and-Fungus Resistant (for Treatment of Communications, Electronic, and Associated Equipment) User may Consult ASTM-D3955 and ASTM-D295) |
| DOD E 24607 : A | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
| MIL-F-495 Revision E:1988 | FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-C-10578 Revision D:1982 | Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base) |
| MIL C 14538 : C | CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| MIL-STD-1223 Revision AC:1991 | NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS (S/S BY MIL-HDBK-1223) |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL-T-12879 Revision A:1966 | TREATMENTS, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES (S/S BY ASTM-D2092) |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT (NO S/S DOCUMENT) |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) (S/S BY SAE-AMS-QQ-C-320) |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| MIL-T-10727 Revision C:1989 | TIN PLATING: ELECTRODEPOSITED OR HOT-DIPPED, FOR FERROUS AND NONFERROUS METALS (S/S BY ASTM-B545, ASTM-B339) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| QQ-S-365 Revision D:1985 | SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR (USERS MAY CONSULT ASTM-B700) |
| MIL-C-8514 Revision C:1967 | Coating Compound, Metal Retreatment, Resin-Acid (ASG) |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL G 45204 : C | GOLD PLATING, ELECTRODEPOSITED |
| MIL L 46147 : B | LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
| MIL-C-81751 Revision B:1972 | Coating, Metallic-Ceramic |
| MIL-STD-865 Revision D:2007 | Selective Brush Plating, Electro-Deposition |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-P-23408 Revision B:1983 | Plating: Tin-Cadmium (Electrodeposited) |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| TT-P-28 Revision H:2007 | Coating, Heat Resisting |
| TT-P-664 Revision D:1988 | PRIMER COATING, ALKYD, CORROSION-INHIBITING, LEAD AND CHROMATE FREE, VOC-COMPLIANT (S/S BY SSPC-PAINT25) |
| TT-L-32 Revision A:1969 | Lacquer, Cellulose Nitrate, Gloss, for Aircraft use (S/S by A-A-3165) |
| MIL-C-14550 Revision B:1983 | Copper Plating (Electrodeposited) (S/S by SAE-AMS2418) |
| MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD (ELECTRODEPOSITED (S/S BY SAE-AMS-P-81728) |
| MIL V 12276 : D | VARNISH, PHENOLIC, BAKING |
| MIL-C-23217 Revision B:1969 | Coating, Aluminum, Vacuum Deposited (ASG) (No S/S Document) |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| MIL-P-46105 Base Document:1966 | PRIMER COATING, WELD-THROUGH, ZINC-RICH (S/S BY SSPC-PAINT30) |
| QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
| MIL-P-14553 Revision C:1972 | PRIMER COATING, DIPPING AUTOMOTIVE (NO S/S DOCUMENT) |
| MIL-C-8837 Revision B:1983 | Coating, Cadmium (Vacuum Deposited) (S/S by SAE-AMS-C-8837) |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-L-13762 Revision B:1983 | Lead Alloy Coating, Hot Dip (for Iron and Steel Parts) (S/S by ASTM-A308) |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| MIL-L-52043 Revision C:1972 | Lacquer, Semi Gloss, Cellulose Nitrate (No S/S Document) |
| MIL-L-13808 Revision B:1975 | Lead Plating (Electrodeposited) |
| TT-C-490 Revision F:2013 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) (S/S BY SAE-AMS-QQ-N-290) |
| VV-L-800 Revision C:1983 | Lubricating Oil, General Purpose, Preservative, (Water-Displacing, Low Temperature) (S/S by MIL-PRF-32033) |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| MIL-D-24483 Revision A:1974 | Deck Covering, Spray-on, Nonslip (S/S BY MIL-PRF-24667) |
| A-A-884 Revision A:1981 | TAPE, PRESSURE-SENSITIVE ADHESIVE, BOX CLOSURE (S/S BY ASTM D5486) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.