|
ASTM D 6695 : 2016 : REDLINE
|
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
|
ASTM D 6675 : 2001 : R2015
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
|
SDI A250.3 : 2007(R2011)
|
TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR - FACTORY APPLIED FINISH COATINGS FOR STEEL DOORS AND FRAMES |
|
MIL-E-52891 Revision B:1988
|
ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
|
MIL-PRF-62284 Revision B:2009
|
BLOWER ASSEMBLY, AIR CLEANER |
|
A-A-3132 Revision A:2003
|
COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
|
TT-P-664 Revision D:1988
|
PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
|
MIL-PRF-32584 Base Document:2017
|
Deck Covering Materials, Monolithic |
|
13/30285580 DC : 0
|
BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
|
SSPC-GUIDE 19 : 2012
|
SELECTION OF PROTECTIVE COATINGS FOR USE OVER GALVANIZED SUBSTRATES |
|
ASTM D 6675 : 2001 : R2011
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
|
MIL-DTL-11414 Revision F:2013
|
Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
|
MIL-PRF-22750 Revision G:2011
|
COATING, EPOXY, HIGH-SOLIDS |
|
MIL-STD-193 Revision L:1991
|
PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
|
A-A-3130 Revision A:2003
|
PAINT (FOR APPLICATION TO WET SURFACES) |
|
MIL-PRF-32171 Revision B:2009
|
DECK COATINGS, HIGH DURABILITY |
|
MIL P 53030 : A
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
|
ASTM D 7376 : 2010
|
Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
|
ASTM D 2248 : 2001
|
Standard Practice for Detergent Resistance of Organic Finishes |
|
ASTM D 3322 : 1982 : R2001
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM F 3019/F3019M : 2014
|
Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
|
ASTM D 3451 : 2006 : R2017
|
Standard Guide for Testing Coating Powders and Powder Coatings |
|
ASTM F 2833 : 2011
|
Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
|
ASTM D 7868 : 2013
|
Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings |
|
ASTM D 2248 : 2001 : REV A : R2007
|
Standard Practice for Detergent Resistance of Organic Finishes |
|
ASTM D 5163 : 2016 : REDLINE
|
Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
|
ASTM D 7868 : 2013 : R2017
|
Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings |
|
ASTM D 7893 : 2013
|
Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
|
ASTM D 2248 : 2001 : REV A : R2018
|
Standard Practice for Detergent Resistance of Organic Finishes |
|
ASTM B 895 : 2016 : REDLINE
|
Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution |
|
ASTM D 7376 : 2010 : REV A : R2016
|
Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
|
ASTM D 5894 : 2016 : REDLINE
|
Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
|
ASTM F 2833 : 2011 : R2017
|
Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
|
ASTM G 198 : 2017 : REDLINE
|
Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
|
ASTM D 1654 : 2008 : R2016
|
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
|
I.S. EN ISO 4628-3:2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING (ISO 4628-3:2016) |
|
MIL PRF 62180 : D
|
SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
|
NACE RP 02 81 : 2004
|
METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
|
MIL-DTL-53084 Revision B:2011
|
Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
|
MIL P 11414 : E
|
PRIMER COATING, LACQUER, RUST INHIBITING |
|
MIL P 53022 : B
|
PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
|
DIN 53210:1978-02
|
DESIGNATION OF DEGREE OF RUSTING OF PAINT SURFACES |
|
MIL-DTL-62180 Revision E:1998
|
SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
|
14/30301162 DC : 0
|
BS EN ISO 4628-3 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING |
|
DOD-P-24555 Base Document:1977
|
PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
|
MIL P 52995 : 0
|
PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
|
SSPC-PAINT 24 : 2016
|
LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
|
MIL E 11195 : E
|
ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
|
AASHTO M 300 : 2003
|
SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
|
MIL P 53084 : 0
|
PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
|
MIL-DTL-53022 Revision C Interim Revision:2007
|
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
|
MIL-DTL-53022 Revision E:2012
|
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
|
IEEE 1895:2014
|
BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES |
|
ASTM D 3322 : 1982 : R2011
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 3322 : 1982 : R2005
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
UNE-EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
|
ASTM D 2248 : 2001 : REV A : R2013
|
Standard Practice for Detergent Resistance of Organic Finishes |
|
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM D 1654 : 2008
|
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
|
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
|
DIN EN ISO 4628-1:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
|
DIN EN ISO 4628-3:2016-07
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
|
I.S. EN ISO 4628-1:2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
|
BS 3900-H3(2003) : 2003
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING |
|
MIL-DTL-6054 Revision G:2007
|
DRUM, METAL-SHIPPING AND STORAGE |
|
BS 3900-H3:1983
|
Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of rusting |
|
MIL-PRF-32049 Base Document:1999
|
PALLET, FIELD ARTILLERY PROJECTILE |
|
MIL-DTL-53030 Revision B Interim Revision:2003
|
Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
|
MIL-DTL-53030 Revision D:2011
|
Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
|
SSPC-PAINT 23 : 2013
|
LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
|
MIL-DTL-32459 Base Document:2013
|
Coatings, Anodic for Magnesium and Magnesium Alloys |
|
SAE USCAR 1 : 2012
|
SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES |
|
ASTM D 6943 : 2015 : REDLINE
|
Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
|
ASTM G 210 : 2013
|
Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus |
|
I.S. EN ISO 2063-2:2017
|
THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
|
CSA G401 : 2014
|
CORRUGATED STEEL PIPE PRODUCTS |
|
ACI 423.7 : 2014
|
SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS |
|
NACE TM 01 84 : 83(R1994)
|
ACCELERATED TEST PROCEDURES FOR SCREENING ATMOSPHERIC SURFACE COATING SYSTEMS FOR OFFSHORE PLATFORMS AND EQUIPMENT |
|
ASTM D 1150 : 1955 : R1987 : EDT 1
|
Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints |
|
ASTM D 3451 : 2006
|
Standard Guide for Testing Coating Powders and Powder Coatings |
|
ASTM D 3322 : 1982 : R1996 : EDT 1
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
I.S. ISO 4628-3:1988
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF INTENSITY, QUANTITY AND SIZE OF COMMON TYPES OF DEFECT - PART 3: DESIGNATION OF DEGREE OF RUSTING |
|
BS EN ISO 4628-1:2016
|
Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance General introduction and designation system |
|
NASA STD 5008 : 2011
|
PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
|
NASA STD 5008A : *DUPLICATE RECORD*
|
**DUPLICATE RECORD** |
|
ASTM D 6675 : 2001 : R2006
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
|
MIL-PRF-24596 Revision B:2009
|
COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
|
MIL-DTL-62270 Revision B:1998
|
CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5 |
|
16/30278559 DC : 0
|
BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
|
BS EN ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
|
ASTM D 4587 : 2011 : REDLINE
|
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
|
ASTM D 7376 : 2010 : REV A
|
Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
|
MIL PRF 62270 : A
|
CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5 |
|
14/30273520 DC : 0
|
BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
|
MIL-R-53086 Base Document:1988
|
RUST CONVERTER, METRIC |
|
MIL-PRF-14105 Revision E:2011
|
PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
|
14/30289891 DC : 0
|
BS EN ISO 4628-1 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM |
|
NACE SP 02 15 : 2015
|
BELOW-GRADE CORROSION CONTROL OF TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES BY COATING REPAIR SYSTEMS |
|
MIL-DTL-70951 Revision A:2007
|
PALLET, FIELD ARTILLERY PROJECTILE |
|
ASTM D 3451 : 2006 : R2012
|
Standard Guide for Testing Coating Powders and Powder Coatings |
|
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
TT-P-28 Revision H:2007
|
PAINT, ALUMINUM, HEAT RESISTING |
|
SAE AS 6054 : 2006
|
DRUM, METAL-SHIPPING AND STORAGE |
|
ASTM D 5962 : 1996 : R1999
|
Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility (Withdrawn 2008) |
|
BS EN ISO 2063-2:2017
|
Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
|
ASTM D 870 : 2015
|
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
|
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM D 6675 : 2001
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
|
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
|
EN ISO 2063-2:2017
|
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
|
GOST 849:2018
|
Primary nickel. SpecificationsE |
|
UNE-EN ISO 4628-1:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016) |
|
ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks |
|
BS EN ISO 4628-3:2016
|
Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of rusting |
|
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
|
ISO 4628-1:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
|
EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
|
EN ISO 4628-1:2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
|
EN ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
|
MIL-DTL-62164 Revision E:2010
|
SEMITRAILER, LOWBED, HEAVY EQUIPMENT TRANSPORTER, 60-TON, M747 |
|
CGSB-1.114 : M91
|
QUICK-DRYING FLAT ENAMEL |
|
ASTM D 2248 : 2001 : REV A
|
Standard Practice for Detergent Resistance of Organic Finishes |
|
AASHTO R 31 : 2009 : R2014
|
PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
|
MIL-DTL-11195 Revision H:2011
|
Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
|
ASTM D 1735 : 2014 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
|
SAE AS 6055 : 2006
|
DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
|
NACE SP 04 15 : 2015
|
BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES |
|
MIL-PRF-32076 Base Document:2000
|
UNITIZATION OF AMMUNITION |
|
SAE J 1976 : 2012
|
OUTDOOR WEATHERING OF EXTERIOR MATERIALS |
|
MIL D 6054 : F
|
DRUM, METAL - SHIPPING AND STORAGE |
|
IEEE 1839 : 2014
|
BELOW-GRADE CORROSION CONTROL OF TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES BY COATING REPAIR SYSTEMS |
|
I.S. EN ISO 16961:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
|
ISO 2063-2:2017
|
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
|
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
|
ASTM D 1654 : 2008 : R2016 : EDT 1
|
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
|
NACE TM 01 74 : 2002
|
LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE |
|
ASTM D 3322 : 1982 : R2017
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
|
ASTM D 5065 : 2017 : REDLINE
|
Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |