MIL-STD-202-208 Base Document:2015
NA
NA
Status of Standard is Unknown
Method 208, Solderability
Available format(s)
PDF
Language(s)
English
Published date
18-04-2015
Publisher
€16.67
Excluding VAT
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Establishes the solderability of all terminations which are normally joined by a soldering operation.
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
The purpose of this test method is to determine the solderability of all terminations which are normally joined by a soldering operation. This determination is made on the basis of the ability of these terminations to be wetted by solder and the predictability of a suitable fillet resulting from solder application. These procedures will verify that the pre-assembly lead finish provides a solderable surface of sufficient quality to enable satisfactory soldering.
| MIL-DTL-83734 Revision H:2007 | Sockets, Plug-in Electronic Components, Dual-in-Line (DIPS) and Single-in-Line Packages (SIPS), General Specification for |
| MIL-DTL-28788 Revision C:2010 | Switches, Air and Liquid Flow, Sensing, General Specification for |
| MIL-DTL-23971 Revision E:2017 | Power Dividers, Power Combiners, and Power Divider/Combiners, General Specification for |
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| MIL-PRF-32535 Revision A:2017 | Capacitor, Chip, Fixed, Ceramic Dielectric (Temperature Stable and General Purpose), Extended Range, High Reliability and Standard Reliability, General Specification for |
| MIL-DTL-83503 Revision C:2005 | Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for |
| MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-PRF-24236 Revision D:2006 | Switches, Thermostatic, (Metallic and Bimetallic), General Specification for |
| MIL-DTL-39030 Revision F:2014 | Dummy Loads, Electrical, Coaxial and Stripline, General Specification for |
| MIL C 62 : F | CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR |
| MIL-PRF-39009 Revision E:2004 | Resistor, Fixed, Wirewound, (Power Type, Chassis Mounted), Nonestablished Reliability, Established Reliability, General Specification for |
| MIL-DTL-83731 Revision E:2016 | Switches, Toggle, Unsealed and Sealed Toggle General Specification for |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-PRF-914 Revision C:2008 | Resistor Network, Fixed, Film, Surface Mount, Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | Resistor, Chip, Thermal (Thermistor), General Specification for |
| MIL-PRF-32159 Base Document:2004 | Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for |
| MIL-PRF-22710 Revision H:2013 | Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for |
| MIL-PRF-39017 Revision G:2006 | Resistor, Fixed, Film (Insulated), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-DTL-28748 Revision D:2001 | Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for |
| MIL-PRF-55681 Revision G:2016 | Capacitor, Chip, Multiple Layer, Fixed Ceramic Dielectric, Established Reliability and Non-Established Reliability, General Specification for |
| MIL-DTL-9419 Revision H:2016 | Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for |
| MIL-DTL-3786 Revision J:2013 | Switches, Rotary (Circuit Selector, Low-Current Capacity), General Specification for |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated General Specification for |
| MIL-PRF-49467 Revision C:2005 | Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For |
| MIL-DTL-28827 Revision C:2011 | Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for |
| MIL-PRF-8805 Revision G:2016 | Switches and Switch Assemblies, Sensitive, Snap Action (Basic, Limit, Push Button and Toggle Switches), General Specification for |
| MIL-PRF-55342 Revision H:2003 | Resistor, Chip, Fixed, Film, Nonestablished Reliability, Established Reliability, Space Level, General Specification for |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
| MIL-PRF-55629 Revision E:2011 | Circuit Breakers, Magnetic, Unsealed or Panel Seal, Trip-Free, General Specification for |
| MIL-DTL-24317 Revision B:2010 | Switches, Multistation, Pushbutton, Illuminated and Non-Illuninated), General Specification for |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| MIL-PRF-39012-96 Revision A:1986 | Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMB (Uncabled ,Male, Printed Circuit, Right Angle, Class 2) |
| MIL-PRF-55182 Revision J:2017 | Resistor, Fixed, Film, Nonestablished Reliability, Established Reliability, and Space Level, General Specification for |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-PRF-28861 Revision E:2016 | Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for |
| MIL-PRF-39012-62 Revision D:2011 | Connectors, Receptacles, Electrical, Coaxial, Radio Frequency, Series SMA (Uncabled, Socket Contact, Jam Nut Mounted, Hermetic Seal, Class 2) |
| MIL-DTL-3928 Revision H:2016 | Switches, Radio-Frequency Transmission Line, (Coaxial and Microstrip), General Specification for |
| MIL-PRF-39012-134 Revision B:2012 | Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMC, Printed Circuit Board Mount, Right Angle |
| MIL-PRF-22885-115 Base Document:2012 | Switches, Pushbutton, Ultra-Compact, LED Illumination, NVIS, Sealed |
| MIL-PRF-23269 Revision H:2016 | Capacitor, Fixed, Glass Dielectric,General Specification for |
| MIL-PRF-39006-31 Revision C:2011 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), Extended Range, +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR91 |
| MIL-PRF-49465 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Very Low Resistance Values, General Specification for |
| MIL-PRF-83446 Revision D:2015 | Coils, Radio-Frequency, Chip, Fixed or Variable, General Specification for |
| MIL-PRF-26 Revision H:2006 | Resistor, Fixed, Wirewound (Power Type) General Specification for |
| MIL-PRF-39012-61 Revision D:2011 | Connectors, Receptacles, Electrical, Coaxial, Radio Frequency, Series SMA (Uncabled, Socket Contact, Jam Nut Mounted, Class 2) |
| MIL-PRF-22097 Revision J:2007 | Resistor, Variable, Nonwirewound, (Adjustment Type), General Specification for |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| MIL-DTL-39030-21 Revision B:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Medium Power |
| MIL-PRF-39019 Revision F:2010 | Circuit Breakers, Magnetic, Low-Power Sealed, Trip-Free General Specification for |
| MIL-PRF-32560 Base Document:2016 | Coil, Radio Frequency, Surface Mount, Fixed Established Reliability, General Specification for (No S/S Document) |
| MIL-PRF-32560-1 Base Document:2016 | Coil, Radio Frequency, Chip, Fixed, Conformal Coated, Established Reliability, Surface Mount (No S/S Document) |
| MIL-PRF-32560-6 Base Document:2016 | Coil, Radio Frequency, Chip, Fixed, Open Construction Established Reliability, Surface Mount, 0603 Size (No S/S Document) |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| MIL-PRF-32560-3 Base Document:2016 | Coil, Radio Frequency, Chip, Fixed, Molded, Unshielded Established Reliability, Surface Mount (No S/S Document) |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-PRF-39012-60 Revision D:2011 | Connectors, Receptacles, Electrical, Coaxial, Radio Frequency Series SMA (Uncabled, Socket Contact, Flange Mounted, Class 2) |
| A-A-55519-3 Revision D:2017 | Fuse, Inclosed Link, Subminiature, Surface Mount (SM) Very Fast Acting, with Wrap Around Terminals |
| MIL-C-11015 Revision F:2008 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), General Specification for |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| MIL-R-83516 Revision C:2017 | Relays, Reed, Dry, General Specification for (No S/S Document) |
| MIL-PRF-39012-94 Revision C:2014 | Connectors, Receptacles, Electrical, Coaxial, Radio Frequency, Series SMA, (Uncabled), Female, Printed Circuit, Right Angle, Class 2) |
| MIL-PRF-39012-135 Revision C:2012 | Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SSMB, Printed Circuit Board Mount, Right Angle |
| MIL-PRF-28750 Revision J:2017 | Relays, Solid State, General Specification for |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wire-Wound (Accurate), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-PRF-11693 Revision E:2012 | Capacitor, Feed Through, Radio-Interference Reduction, DC (Hermetically Sealed in Metal Cases), Established and Non-Established Reliability General Specification for |
| MIL-PRF-39001 Revision E:2009 | Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| MIL-DTL-8834 Revision K:2016 | Switches, Toggle, Positive Break, General Specification for |
| MIL-PRF-49470 Revision D:2017 | Capacitor, Fixed, Ceramic Dielectric, Switch Mode Power Supply (General Purpose and Temperature Stable), Standard Reliability and High Reliability, General Specification for |
| MIL-C-18312 Revision G:2013 | Capacitor, Fixed, Metallized (Paper-Plastic, or Plastic Film) Dielectric, Direct Current (Hermetically Sealed in Metal Cases), General Specification for (For Future Acquisitions, Use: MIL-PRF-39022) |
| MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
| MIL-DTL-39030-20 Revision D:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Low Power |
| MIL-PRF-39010-18 Base Document:2013 | Coils, Radio Frequency, Shielded, Molded, Fixed, Surface Mount Established Reliability & Non-Established Reliability |
| MIL-DTL-7793 Revision H:2016 | Meter, Time Totalizing |
| DSCC 04053 : E | CAPACITOR, FIXED, FUSED TANTALUM CHIP, NON-WEIBULL GRADED AND WEIBULL GRADED |
| MIL-PRF-32560-2 Base Document:2016 | Coil, Radio Frequency, Chip, Fixed, Molded, Shielded Established Reliability, Surface Mount (No S/S Document) |
| MIL-PRF-23419 Revision H:2013 | Fuse, Cartridge, Instrument Type, General Specification for |
| MIL-PRF-83421 Revision F:2017 | Capacitor, Fixed, Metallized Plastic Film Dielectric, (DC, AC, or DC and AC), Hermetically Sealed in Metal Cases or Ceramic Cases, Established Reliability, General Specification for |
| MIL-DTL-55302 Revision G:2009 | Connectors, Printed Circuit Subassembly and Accessories |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| DSCC 13031 : A | FUSE, INSTRUMENT, SUBMINIATURE |
| MIL-PRF-83530 Revision C:2008 | Resistor, Voltage Sensitive (Varistor, Metal-Oxide), General Specification for |
| MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
| MIL-PRF-83536 Revision F:2017 | Relays, Electromagnetic, Established Reliability, General Specificationfor |
| MIL-DTL-28804 Revision D:1998 | Connectors, Plug and Receptacle, Electric, Rectangular, High Density, Polarization Center Jackscrew General Specification for |
| MIL-DTL-5757 Revision N:2017 | Relays, Electromagnetic, General Specification for |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL-PRF-39015 Revision E:2006 | Resistor, Variable, Wirewound, (Lead Screw Actuated), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-PRF-39006-22 Revision J:2012 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR79 |
| MIL-PRF-39012-93 Revision C:2014 | Connectors, Receptacles, Electrical, Coaxial, Radio Frequency, (Series SMA (Uncabled), Female, Printed Circuit, Class 2) |
| MIL-PRF-22684 Revision F:2006 | Resistor, Fixed, Film (Insulated) General Specification for |
| MIL-PRF-39007 Revision J:2005 | Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for |
| MIL-PRF-39006 Revision G:2006 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-39018 Revision G:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide), Established Reliability, and Non-Established Reliability, General Specification for |
| DSCC 02005 : B | RESISTOR, VARIABLE, NONWIREWOUND (ADJUSTMENT TYPE, LEAD-SCREW ACTUATED) 1/2 INCH RECTANGULAR, 0.3 WATTS |
| MIL-DTL-83505 Revision C:2017 | Sockets, (Lead, Electronic Components) General Specification for |
| MIL-PRF-20 Revision N:2017 | Capacitor, Fixed, Ceramic Dielectric (Temperature Compensating), Established Reliability and Non-Established Reliability, General Specification for |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 03009D:2024 | RESISTOR, FIXED, CARBON FILM, HIGH PULSE VOLTAGE, 3 WATT |
| DSCC 03005D:2024 | RESISTOR, FIXED, CARBON FILM, HIGH PULSE VOLTAGE, 1/2 WATT |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 97009E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.3 WATT, POWER CURVE A |
| DSCC 97010E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.3 WATT, POWER CURVE B |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.