MIL-STD-202-210 Base Document:2015
NA
NA
Status of Standard is Unknown
Method 210, Resistance to Soldering Heat
Available format(s)
PDF
Language(s)
English
Published date
18-04-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Establishes whether wire and other component parts can withstand the effects of the heat to which they will be subjected during the soldering process (solder iron, solder dip, solder wave, or solder reflow).
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
This test is performed to determine whether wire and other component parts can withstand the effects of the heat to which they will be subjected during the soldering process (solder iron, solder dip, solder wave, or solder reflow). The heat can be either conducted heat through the termination into the component part, or radiant heat from the solder bath when in close proximity to the body of the component part, or both. The solder dip method is used as a reasonably close simulation of the conditions encountered in wave soldering, in regard to radiated and conducted heat. This test also is intended to evaluate the impact of reflow techniques to which components may be exposed. The heat of soldering can cause solder reflow which may affect the electrical characteristics of the component part and may cause mechanical damage to the materials making up the part, such as loosening of terminations or windings, softening of insulation, opening of solder seals, and weakening of mechanical joints.
| MIL-DTL-83734 Revision H:2007 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| MIL-PRF-32535 Revision A:2017 | Capacitor, Chip, Fixed, Ceramic Dielectric (Temperature Stable and General Purpose), Extended Range, High Reliability and Standard Reliability, General Specification for |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83731 Revision E:2016 | SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR |
| MIL-PRF-914 Revision C:2008 | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR |
| MIL-PRF-32159 Base Document:2004 | Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for |
| MIL-PRF-39017 Revision G:2006 | RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-55681 Revision G:2016 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-9419 Revision H:2016 | Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
| MIL-PRF-49467 Revision C:2005 | Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For |
| MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
| MIL-PRF-55342 Revision H:2003 | RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| DSCC 13031 : A | FUSE, INSTRUMENT, SUBMINIATURE |
| MIL-PRF-55182 Revision J:2017 | RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-28861 Revision E:2016 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| MIL-PRF-23269 Revision H:2016 | CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-39006-31 Revision C:2011 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), Extended Range, +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR91 |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| MIL-PRF-32560 Base Document:2016 | COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-C-11015 Revision F:2008 | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| A-A-55519-3 Revision D:2017 | FUSE, INCLOSED LINK, SUBMINIATURE, SURFACE MOUNT (SM), VERY FAST ACTING, WITH WRAP AROUND TERMINALS |
| MIL-PRF-27-372 Base Document:2012 | Transformers and Inductors (Audio, Power and High-Power Pulse), Inductor, Surface Mount, Leadless |
| MIL-R-83516 Revision C:2017 | Relays, Reed, Dry, General Specification for (No S/S Document) |
| MIL-DTL-23971-6 Revision D:2017 | POWER DIVIDER/COMBINERS, N-WAY, 0 DEGREES, TO-5 |
| MIL-PRF-19 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR |
| MIL-PRF-28750 Revision J:2017 | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, Established Reliability, General Specification for |
| MIL-PRF-39001 Revision E:2009 | Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| MIL-DTL-8834 Revision K:2016 | Switches, Toggle, Positive Break, General Specification for |
| MIL-PRF-49470 Revision D:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
| MIL-PRF-39010-18 Base Document:2013 | Coils, Radio Frequency, Shielded, Molded, Fixed, Surface Mount Established Reliability & Non-Established Reliability |
| IEC PAS 62686-2:2016 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
| PD IEC/PAS 62686-2:2016 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components |
| MIL-PRF-23419 Revision H:2013 | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| MIL-PRF-83530 Revision C:2008 | RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR |
| MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| MIL-DTL-5757 Revision N:2017 | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL-PRF-39015 Revision E:2006 | RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39006-22 Revision J:2012 | Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR79 |
| MIL-PRF-22684 Revision F:2006 | RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-83421-1 Revision E:2016 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, STYLES CRH01, CRH02, CRH03, CRH04, CRH05, CRH06, CRH07, CRH08, CRH09, AND CRH00 |
| MIL-PRF-55514-13 Revision A:2013 | Capacitor, Fixed, Metalized Plastic Dielectric, DC-AC, in Nonmetal Cases, Established Reliability, Style CFR30 |
| MIL-DTL-83505 Revision C:2017 | SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 95008D:2023 | CAPACITOR, FIXED, FEED THROUGH, ELECTROMAGNETIC INTERFERENCE SUPPRESSION, (HERMETICALLY SEALED IN METAL CASES) |
| DSCC 97009E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.3 WATT, POWER CURVE A |
| DSCC 97010E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.3 WATT, POWER CURVE B |
| DSCC 04003 : E | CAPACITOR, TANTALUM, HYBRID, HERMETICALLY SEALED |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC 4101 : D | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.